• Acta Via Serica
• /
• v.3 no.1
• /
• pp.11-25
• /
• 2018

The Renaissance is generally said to be the rebirth of the ancient civilizations of Greece and Rome, and was centered around Italy from the 14th to the 16th century. This includes the temporal peculiarity of the Renaissance as a sudden phenomenon after the Medieval Ages, and the spatial peculiarity of what happened only in Europe. However, if we remove the European-centered bias here, the horizon for interpreting the Renaissance becomes much wider. There have been claims that similar cultural phenomena resembling the Renaissance existed in other civilizations at the same time. This paper seeks to investigate two possibilities. The first is the possibility of a spatial expansion of the Renaissance. This suggests that the Renaissance was created by long-term exchanges with the Eastern, Middle and Western Hemispheres. The second is the possibility of a simultaneity of the Renaissance in the 14th and 16th centuries. This suggests that it was a global phenomenon that occurred in different civilizations. The Renaissance, therefore, was a crystallization of a complex of civilizations created by the crossing of various cultures along the Silk Road, and should be referred to as the 'Global Renaissance' instead of the 'Western Renaissance.'

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.176-179
• /
• 2018

To restore the connectivity of fragmented habitats, 415 wildlife crossings have been built between 1998 and 2014 in South Korea. However, their effect on wildlife conservation is still in doubt. As a first step to examine the effectiveness, our study aims to assess compliance with the guideline for wildlife crossing construction and management, developed by the Ministry of Environment Korea that provides fundamental information to understand the status and the problem of wildlife crossings in Korea and thus to provide practical guidance for the improvement. According to our survey, the Korea National Park Service complied with the guideline best (62.5%) while local government followed the guideline least (46.1%). In addition, the compliance rate was the highest for wildlife crossings in national roads (53.6%) followed by highways (53.2%) and local and municipal roads (52.2%). For the overpass wildlife crossings, the compliance rates for installation of an escaping facility in the drainage and prevention of pedestrian and vehicle access were particularly low. In case of underpass wildlife crossings, small ditches for amphibians and reptiles were not sufficient, and the linkage between wildlife fences and underpass were weak. In order to ensure the effectiveness of wildlife crossings, the effort to increase the compliance rate with the guideline is critical, and mandating the guideline could be a practical way to enforce the compliance.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.65-73
• /
• 2015

PURPOSES : This study tries to develop the accident models of 4-legged signalized intersections in Busan Metropolitan city with random parameter in count model to understanding the factors mainly influencing on accident frequencies. METHODS : To develop the traffic accidents modeling, this study uses RP(random parameter) negative binomial model which enables to take account of heterogeneity in data. By using RP model, each intersection's specific geometry characteristics were considered. RESULTS : By comparing the both FP(fixed parameter) and RP modeling, it was confirmed the RP model has a little higher explanation power than the FP model. Out of 17 statistically significant variables, 4 variables including traffic volumes on minor roads, pedestrian crossing on major roads, and distance of pedestrian crossing on major/minor roads are derived as having random parameters. In addition, the marginal effect and elasticity of variables are analyzed to understand the variables'impact on the likelihood of accident occurrences. CONCLUSIONS : This study shows that the uses of RP is better fitted to the accident data since each observations'specific characteristics could be considered. Thus, the methods which could consider the heterogeneity of data is recommended to analyze the relationship between accidents and affecting factors(for example, traffic safety facilities or geometrics in signalized 4-legged intersections).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.620-628
• /
• 2014

This paper describes the analysis results of channel characteristics in the operating area of satellite OTM (On-The-Move) terminal. The communication channel between the Koreasat-5 and OTM terminal on a test car was measured and recorded in downtown of Daejeon, using the received beacon signal of around 20 GHz. And the measurement data were statistically analyzed and then compared with highway and national road environments. The statistical evaluation of satellite channel was conducted by using probability density function and Markov model and then presented average connection duration(ACD), average fade duration(AFD), and level crossing rate(LCR) of downtown environment.

• International Journal of Computer Science & Network Security
• /
• v.24 no.5
• /
• pp.1-10
• /
• 2024

Individuals with visual impairments face numerous challenges in their daily lives, with navigating streets and public spaces being particularly daunting. The inability to identify safe crossing locations and assess the feasibility of crossing significantly restricts their mobility and independence. Globally, an estimated 285 million people suffer from visual impairment, with 39 million categorized as blind and 246 million as visually impaired, according to the World Health Organization. In Saudi Arabia alone, there are approximately 159 thousand blind individuals, as per unofficial statistics. The profound impact of visual impairments on daily activities underscores the urgent need for solutions to improve mobility and enhance safety. This study aims to address this pressing issue by leveraging computer vision and deep learning techniques to enhance object detection capabilities. Two models were trained to detect objects: one focused on street crossing obstacles, and the other aimed to search for objects. The first model was trained on a dataset comprising 5283 images of road obstacles and traffic signals, annotated to create a labeled dataset. Subsequently, it was trained using the YOLOv8 and YOLOv5 models, with YOLOv5 achieving a satisfactory accuracy of 84%. The second model was trained on the COCO dataset using YOLOv5, yielding an impressive accuracy of 94%. By improving object detection capabilities through advanced technology, this research seeks to empower individuals with visual impairments, enhancing their mobility, independence, and overall quality of life.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.125-136
• /
• 2005

The current traffic accident reduction procedure in economic feasibility study does not consider the characteristics of road and V/C ratio. For solving this problem, this paper suggests methods to be able to evaluate safety of each road in construction and improvement through developing accident Prediction model in reflecting V/C ratio Per road types and traffic characters. In this paper as primary process, model is made by tke object of urban roads. Most of all, factor effecting on accident relying on road types is selected. At this point, selecting criteria chooses data obtained from road planning procedure, traffic volume, existence or non-existence of median barrier, and the number of crossing point, of connecting road. and of traffic signals. As a result of analyzing between each factor and accident. all appear to have relatives at a significant level of statistics. In this research, models are classified as 4-categorized classes according to roads and V/C ratio and each of models draws accident predicting model through Poisson regression along with verifying real situation data. The results of verifying models come out relatively satisfactory estimation against real traffic data. In this paper, traffic accident prediction is possible caused by road's physical characters by developing accident predicting model per road types resulted in V/C ratio and this result is inferred to be used on predicting accident cost when road construction and improvement are performed. Because data using this paper are limited in only province of Jeollabuk-Do, this paper has a limitation of revealing standards of all regions (nation).

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.61-74
• /
• 2009

Traffic accident risk index Computation model's development apply traffic level of significance about area of road user group, road and street network area, population group etc.. through numerical formula or model by countermeasure to reduce the occurrence rate of traffic accidents. Is real condition that is taking advantage of risk by tangent section through estimation model and by method to choose improvement way to intersection from outside the country, and is utilizing being applied in part business in domestic. However, question is brought in the accuracy being utilizing changing some to take external model in domestic real condition than individual development of model. Therefore, selection intersection estimation element through traffic accidents occurrence present condition, geometry structure, control way, traffic volume, turning traffic volume etc. in 96 intersections in this research, and select final variable through correlation analysis of abstracted estimation elements. Developed intersection design model taking advantage of signal type, numeric of lane, intersection type, analysis of variance techniques through ANOVA analysis of three variables of intersection form with selected variable lastly, in signal crossing through three class intersection, distinction variable choice risk in model, no-signal crossing risk distinction analysis model and so on develop.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1995.12b
• /
• pp.23-29
• /
• 1995

Green landscape plan to the riverfront area of the Han River The Han River, one of the symbolic elements in metropolitan Seoul, structures an axis of waterscape as the openspace crossing east to west of the city of Seoul. As riverside urban motorway(88 Olympic motorway) and riverside public park were constructed by the Han River Comprehensive Development Project in 1986, the necessity of general plan for the in-stallation of envirommental facility belt to conserve living enviroument is being required with relation to, dense residential areas closed to the river Therefore, the goal of the study is to provide better riverview and to increase environmental purifi-cation ability as a large scale waterscape axis by the preparation of landscape plan to the riverfront area of Han River, In order to achieve the goal, the study deals with sectional speciality, the introduction of landscape assessment techniques and ecological approach to given environment. As unity is kept through whole waterfront area, the area is divided into 9 zoning sections to study development methods for each section, and themes for speciality are given to each section, and the. sort of plants which can be symboliged to the area is selected. Also, the planting methods for harmony with the type of road structure and riverscape is offered. Though the study may give significane to the image and the function of riverside road, in con-clusion, the characteristic ecological approach to the river is so limited that has not been reflected enough on the plan. It is expected that the study should be continued, and long-term riverfront openspace plan, environmentally sustainable, should be arepared.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.305-310
• /
• 2003

This study is intended to outline the lessons that can be learned from European experience of the opportunities and challenges involved in operating train ferries to carry freight. The study considers the various train ferry routes that have operated over recent years in Europe, examines their characteristics, and then proceeds to evaluate the economic viability of train ferries in general. On the basis of this analysis, we have attempted to outline the conditions that appear to be required under which Train Ferries may be competitive. This study shows that long crossing train ferries in Europe have survived where the adjacent railway systems handle a significant volume of domestic traffic and do themselves playa serious role in the transport industry. There is no reason to suppose railway wagons cannot be carried economically over long distances. Experience in Western Europe is that they are best operated as mixed road trailer and rail wagon services. Only the lower deck need carry railway wagons, which greatly simplifies loading and the physical construction of the ship. Existing road based ro-ro ferries can be adapted to become rail ferries. It is, however, essential that there is commercial clarity as to the responsibility for ensuring the overall service is viable. To that end, the ferry company is responsible for marketing the service and managing relationships between the two railway authorities.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.498-501
• /
• 2006

R.C. Rahmen bridges have been widely constructed in the location of interchange or narrow road crossing. In addition, skewed or curved rahmen bridges are mostly constructed in comparison with normal rahmen bridges for the purpose of maintaining the route of road or considering the beauty of bridge. However, due to the functional characteristics, rahmen bridges are sustained under the direct vehicle loads and the side directional earth pressure so that the stress concentration with respect to the geometrical eccentricity can be occurred if rahmen bridges are constructed in large amount of skew. In this investigation, the behavior of skewed rahmen bridges which is located in curved route has been analysed to investigate the additional effects on the change of stress concentration. As a result, it is judged that the stress of curved rahmen bridges is more concentrated than the stress of straight rahmen bridges in the region of obtuse angle. However, in the middle of slab, the curve does not affect on the stress concentration.