• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1071-1077
• /
• 2010

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness(NVH) engineers. A passenger vehicle has various and complicated transmission paths of sound and vibration. In order to identify the mechanism of transfer path, estimation of excitation force and exact modeling of transfer path are required. This paper presents method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. And vector synthesis technique is employed to identify the characteristics of road noise and its transmission to vehicle compartment through noise and vibration analysis. Vibration reduction efficiency of each transfer path is evaluated by comparing individual vector components obtained virtual simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2014

Recently, military vehicles that are being driven are equipped with a lot of electronic devices. The military vehicles are easily exposed to impact. Thus, they have to be designed robustly to ensure that the stability of the vehicle and the electronic equipment. In order to design the vehicles efficiently, the dynamic characteristics of a military vehicle have to be identified exactly. The main frame has a significant role to the dynamic characteristics of the vehicle. Thus, this research was progressed mainly with the frame. By carrying out road tests, the characteristics could be identified. Also, based on the characteristics, we constructed FE model of the frame and performed the analysis of the dynamic characteristics of the vehicle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.262-266
• /
• 2014

Military vehicle equipped with an antenna and a shelter for operating radar has a vibration exposure during driving time. This vibration would have influence on structure of military vehicle critically. In this paper, driving stability of the military vehicle is obtained through the vibration response analysis. And, vibration level of the military vehicle satisfied the military vibration specification through analysis and comparing the MIL-STD-810G. PSD and Grms data obtained by road test can be used for vibration test specification of cabinets and electronic equipment in shelter.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.211-219
• /
• 2003

The main study experiments to obtain engine torque of the vehicle during performance test of the recent automobile. Torque was measured through the engine dynamometer to produces engine torque of the vehicle but the research method calculated engine torque of the vehicle without the engine dynamometer. The performance of the vehicle receive various running resistance. The study certificates performance of certification before a certification of used vehicle didn't carry out and certificate. This way evaluated on road test and chassis dynamometer The result of the study shows that it is much possible to apply the test. After comparing the engine torque of road driving with that of chassis dynamometer, the results are approximately the same. When rapidly speeded up, the road-load vehicle can pitch in some degrees, which may result in the fluctuations of acceleration, and then affect on the engine torque. Therefore it is confirmed that this method is easier way to measure the performance of vehicles.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.48-53
• /
• 2020

This paper describes in work which is currently underway to the minimum safety performance requirements and test methods of V2V based on IEEE 802.11p in vehicle level like below. - The ranges and positions at static and driving condition of vehicle for BSM (Basic safety message) - Various road conditions such as straight road, crossroad, slope-way Based on this study, We will define the minimum safety performance requirements and test methods of V2V in vehicle considering various road conditions.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.851-860
• /
• 2012

In this study, to evaluate the abatement of runoff pollution loads by the road sweeping(cleaning), various investigations are implemented at the sample area of the highway. As the results of evaluating the removal efficiency of pollutants along road cleaning, TSS showed about 78 % of the removal efficiency and COD showed 49 % of removal efficiency through the operation of cleaning vehicle of vacuum suction method. In case of TN and TP, they showed the relatively-lower removal efficiency by 30~35 %. TSS removal efficiency along the number of cleaning appeared about 60 % in case of one time of cleaning and the additional removal effect did not appear though the number of cleaning increased to two times. With running speed of cleaning vehicle, TSS removal ratio is lessened from 60 % to 20 % when cleaning vehicle speed up to 20 km/hr from 6 km/hr. It seems that the reasons why the removal efficiencies are inversely proportional to its speed are related to the lower vacuum efficiencies and the disturbed particles on the road. In the pollutant build-up analysis, it is showed that it takes more time to the critical pollutant build-up in the shoulder than the center of the road. It is also showed that the proper cleaning cycle is recommended as 4~6 dry weather days without rainfall events.

• 대한공간정보학회지
• /
• 제2권2호
• /
• pp.89-98
• /
• 1994

자동차항법장치에 있어서 정확한 위치표현기능, 최적경로안내, 목적지검색, 지형지물정보 제공기능 등을 수행하기 위해서는 수치도로지도가 가장 기본적 요소이다. 그러나, 미국의 TIGER 화일같이 수치도로지도제작에 쉽게 이용될 수 있는 범국가적인 수치지도가 한국에는 마련되어 있지 않으므로, 새로이 제작을 할 수밖에 없는 현실이다. 본 연구에서는 항법용 수치도로지도를 제작함에 있어서 그 호환성과 경제성을 확보하고, 수치도로지도의 질적안정성을 기하기 위한 필요조건을 제시하였으며, 그 결과로 좌표계와 정확도의 기준을 제시하였고, 데이타베이스 항목과 그 구조를 결정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.581-586
• /
• 2014

In general vibration test considers both harmonic vibration and random vibration, When developing the vehicle component. But the effect of harmonic vibration is larger in the parts around the vehicle engine, sole testing the harmonic vibration is considered. In this study, the fatigue damage of the linear system fixed around the engine is analyzed when the effect of random vibration is higher, harsher than the normal road surface condition. In condition the vehicle speed and the engine RPM are similar, the higher the harshness of the road surface condition is, the larger the fatigue damage level is. Therefore both random vibration and harmonic vibration must be considered in vibration test of components around the engine. Proposing the sine on random(SOR) vibration test that can exam considering both of vibrations, harmonic and random.

• 한국ITS학회 논문지
• /
• 제16권6호
• /
• pp.219-230
• /
• 2017

본 논문에서는 확장형 칼만필터를 적용하여 영상센서 기반 차대도로간 트래킹 알고리즘을 제안한다. 일반적으로 횡방향 오프셋, 차선대비 상대경로각, 전방도로 곡률은 차선유지지원시스템의 경로추종 횡방향 제어기 구성 또는 차선이탈경보시스템의 경보 로직을 위한 중요 입력값으로 활용되는데 이를 위해 본 연구에서는 영상센서 차선인식 결과값인 이미지 상의 차선 추출점의 좌표값과 더불어 요레이트, 조향각, 차속 센서 측정값, 그리고 차량의 횡방향 운동방정식을 고려한 확장형 칼만필터를 적용하여 차대도로간 트래킹 정보를 추출한다. 제안된 차대도로간 트래킹 알고리즘의 유효성을 증명하기 위해 주행 테스트 도로 상에서 DGPS-RTK 장비를 이용하여 비교 검증하여 그 유효성을 보였다.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.945-949
• /
• 2013

By using information about specific road grades, one can predict the power required by a vehicle. The prediction of the required power enables the driver to choose the driving route with the best fuel economy, which results in cost and energy savings. A clinometer is one of the more simple tools used to measure road grades, but requires significant time and effort. In this paper, a new method for measuring road grades from within a vehicle is proposed and experimentally verified.