• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.323-328
• /
• 2005

Bridge structures are properly designed in accordance with the design specifications with required safety margin. However, due to the heavy vehicle traffic and environmental attacks, bridge often requires repairs and the deteriorated one should be replaced or rehabilitated. In this paper, a prior ranking algorithm is proposed to assist a decision making process in bridge management at network level. Based on the literature survey for the existing studuies, two important factors which affect the decision making procedure for bridge management at network level are identified. These factors are implemented into the algorithm as a load carrying capacity function and traffic function, respectively.

• Journal of Environmental Science International
• /
• v.21 no.9
• /
• pp.1149-1162
• /
• 2012

The impact of a considerable increase in traffic volume on the emission and concentrations of air pollutants was investigated at three beaches (Haeundae (HB), Gwanganri (GB), and Songjeong (SB)) in Busan during beach opening period (BOP) in 2011. During the BOP, passenger car was the major vehicle type, followed by taxi, and van. CO was the major contributor of total air pollutant emissions followed by NOx, VOC, and $PM_{10}$. For the temporal variation of the emission of air pollutants during the BOP, it was generally the highest in the afternoon followed by the evening and morning, except for SB. For the spatial variation of their emission, it was the highest at GB followed by SB and HB. The emissions of air pollutants during the BOP were generally higher than those during the Non-BOP, except for HB. In contrast, the significant impact of the traffic volume increase on the concentrations of air pollutants at monitoring sites near the three beaches during the BOP were not found compared to the Non-BOP due to the significant distances between monitoring sites of air pollutants and monitoring sites of traffic volume at the beaches.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.134-141
• /
• 1998

Sometimes we need to acquire symbolic quantity of information instead of physical quantity for the output of any system. For instance we can not control traffic signal accurately through only the number of vehicles. At that case we can produce better output using symbolic quantity of road length and width and vehicle type. But it is very difficult to aggregate symbolic information from the unrelated and mutually conflicted input after calculating linear and related expression. Moreover that will take much time to produce symbolic output by the physical quantity only. In this paper we implemented the ultimate traffic control information by using fuzzy sensor algorithm and compared our results with the conventional traffic controller after studying the necessity of symbolic information in the traffic control.

• Proceedings of the ESK Conference
• /
• 1996.10a
• /
• pp.185-190
• /
• 1996

Navigation system is regarded as the interface border line between the Intelligent Transportation Systems (ITS) and the driver as the prospective information provider of the ATIS (Advanced Traveler Information System). Following theory, if the navigation system appropriately designed and utilized, that can maximize the transport efficiency, contribute to improvements of the environments and road safety. To accomplish these dinds of objectives of the navigation system use, human factors plays an important roles specially focused on the driver's safety, performance and system usability. Because the effectiveness of the system depends on the acceptance of the system, and the extent to which the system conforms to driver physical and cognitive limitations and capabilities. Therefore, the ergonomic design vaniables must be seriously selected and reflected in early design step for more effective and appreciate product design. As the first step of this aim, this study selected and categorized the human factors design variables of the navigation system.

• Advances in environmental research
• /
• v.6 no.2
• /
• pp.139-146
• /
• 2017

The purpose of this study was to determine the present air pollutant concentrations and predicted levels for next 30 years in urban environment of Karachi city. For that, a total of fifty measurements were made for each twenty selected locations of the city. The locations were selected on the basis of land use pattern such as residential, commercial, industrial settlements, open areas, congested traffic and low traffic areas for investigation of air pollutants variability and intensity. The measurements were taken continuously for six months period using PM Meter, Model AEROCET 531 and Ambient Air Quality Meter, Model AAQ 7545. The concentration of air pollutants were found higher at Al Asif Square and Maripur Road due to higher intensity of traffic and at Korangi Crossing because of industrial areas. The level of pollutants was lower at Sea View owing to lower traffic congestion and transportation of pollutants by sea breezes.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.631-641
• /
• 2020

To meet the urgent requirements of safety surveillance from civil engineering management authorities, this study proposes a refined and efficient approach to generate full-field high-resolution panorama of construction sites using camera-amounted UAV (Unmanned Aerial Vehicle). GPS (Global Position System) information extraction for pre-registration, feature points filtering for efficient registration and optimal seaming line seeking for fusion are performed in sequence to form the full-field panorama generation framework. Advantages of the proposed method are as follows. First, GPS information can sort images for pre-registration, avoiding inefficient repeated pairwise calculations and matching. Second, the feature points are filtered according to the characteristics of the construction site images to reduce the amount of calculation. The proposed framework is validated on a road construction site and results demonstrate that it can generate an accurate and high-quality full-site panorama for the safety supervision in a much efficient manner.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.80-85
• /
• 2015

The era of intelligent transportation system(ITS) has been arrived by applying information and communication technology(ICT) to the traffic. One of these technological advances is a wireless communication technology for a high speed vehicle to be connected to an infrastructure(V2I). A variety of road traffic safety services and operator comfort services are being developed by means of WAVE(Wireless Access in a Vehicular Environment) based on IEEE802.11p Standard. In this paper, the link budget is analyzed to provide a reliable quality of these ITS services. Log-distance model and two-ray model is employed for the wave propagation path loss model which is adequate for a highway environment. Reliable cell coverage is suggested for ITS services from the link budget.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.91-101
• /
• 2005

The Mobile Mapping System using the vehicle equipped the GPS, IMU, CCD Cameras is the effective system for the management of the road facilities, update of the digital map, and etc. If the geographic information which is acquired by the Mobile mapping System can be transmitted in realtime, users can process what they want using the latest data. In this research, the effective method was suggested for the transmission of the geographic information acquired by mobile mapping System such as position data, attitude data, and image data in the wireless internet environment in realtime.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.58-68
• /
• 2007

Thorough preparations and investigations must be done in order to prevent the hazards which will happen when workers work on the roof of the rolling stocks. Some industrial disasters can be prevented by solving the risks involved in the working of the work processes. Falling accidents tend to happen from the roof of the trains when workers work in the high position. So through the analysis of the 4M( Man. Machine, Media, Management), this paper analyzed the risk factors among the roof works and all problems of the maintenance. Also this paper suggests new devices or new methods to prevent falling disasters and to relieve the mental senses of uneasiness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3678-3698
• /
• 2017

With the rapid development of vehicular ad hoc Network (VANET), it has gained significant popularity and received increasing attentions from both academics and industry communities in aspects of security and efficiency. To address the security and efficiency issues, a self-authentication and deniable efficient group key agreement protocol is proposed in this paper. The scheme establishes a group between road side units (RSUs) and vehicles by using self-authentication without certification authority, and improves certification efficiency by using group key (GK) transmission method. At the same time, to avoid the attacker attacking the legal vehicle by RSUs, we adopt deniable group key agreement method to negotiation session key (sk) and use it to transmit GK between RSUs. In addition, vehicles not only broadcast messages to other vehicles, but also communicate with other members in the same group. Therefore, group communication is necessary in VANET. Finally, the performance analysis shows superiority of our scheme in security problems, meanwhile the verification delay, transmission overheard and message delay get significant improvement than other related schemes.