• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.259-266
• /
• 2007

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.353-360
• /
• 2007

Rapid urbanization and population increasing are making a high-rise residential building and high-density residential area. According to spacial concentration of population is occurred road traffic noise problem. Now we are popularly using almost only noise barrier installation, but it makes many disfunctions such as poor landscape, low noise barrier performance and crimes. The purpose of this research is to figure out which is best method one the traffic noise management. Alternative are composed to building layout type ($30^{\circ},\;90^{\circ},\;180^{\circ}$), separation between road and residential building, noise barrier types(noise barrier only, noise barrier and forests and etc). The noise barrier are shown to reduce barrier and building layout angle $30^{\circ}$ position is the best comparing with horizontal and vertical layouts. The gab distance is decreased approximately noise level 5dB(A). We figured out there are noise important method except noise barrier wall and it was analyzed how much decreased. This can be very useful before making a road planning and residential building design.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.8
• /
• pp.403-410
• /
• 2008

The noise problem became more serious by the rapid urban population growth and traffic. This study estimates the noise level considering actual traffic volume and building shape and location. Based on the state of the arts noise level, changing amount of noise that was controlled by the speed control and truck and passenger car restriction is calculated. Some conclusion is found out. The 2-D type more than 3-D type is more than over standard of noise pollution and night time's over rate is larger than day time. And in the case of various solutions are used instead of applying one solution, noise pollution is effectively reduced.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.156-162
• /
• 2012

This paper presents differences of road traffic noise maps were generated by using the draft map and two digital maps with different versions. As a first step, the calculation of the areas of excessive noise exposure was made for the draft map and each digital map version. Subsequently, the areas of excessive noise exposure were compared so as to determine how different from each other. Then, comparison of the populations exposed to excessive noise was also conducted in the same way. It was found that the most accurate noise map was obtained when using the combination of the draft map containing all attribute information and the digital map Ver 2.0. This result indicates that more information on the height and the number of floors of the individual building is required in order to obtain more accurate population exposed to excessive noise, thus creating a more accurate noise map.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1048-1052
• /
• 2007

Using road traffic noise, noise map for CheongJu city was drawn. Noise level is estimated and many regions of the city are classified noise excess area compared with environment standard value. Counterplan for the noise excess areas is presented in this study. Noise reduction methods are given in many ways, for example soundproofing walls, low noise pavement, low noise arrangement of buildings and low noise windows.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.911-916
• /
• 2005

Noise map is a presentation of existing data or predicted noise situation in terms of noise indicator. However, it has shortcoming for assessing the number of people exposed, or the number of dwellings affected to any relevant limit values of noise level in certain areas. In this study, so called over-ride value noise mapping is proposed to make up for the shortcoming by using over-ride function of object-oriented programming and it is to show the guard of the area where it is satisfied the standard of option, or it is not satisfactory. Over-ride value noisemap data is combined with topography layer, population and house statistics, and GIS space statistical analysis. The over-ride value noise mapping can also he applied to make the road traffic noisemap, the railroad noisemap, the aircraft noisemap, and the industrial site noisemap This can express noise damage information more exactly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.628-632
• /
• 2007

The purpose of study is to confirm a acceptable range of data errors in data collecting. To examine a acceptable range of data errors, emission level is calculated for a vehicle flow and heavy vehicle percentage as a function of small-sized velocity. According to road selected, noise level of detail influence road noise calculations. It can be concluded that a vehicle flow raised an error less than 5000(veh/h) for a maximum error in emission level of 3.01dB, and the more a heavy vehicle percentage have a low value, the more emission level is a slight difference. This analysis gives insight regarding the accuracy of traffic flow data that is needed to reach a certain level of accuracy for the resulting noise level.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1087-1092
• /
• 2006

Recently, traffic noise level is rapidly increasing, and it is crowed caused by recently overcrowded and overgrown cities, and increasing traffic volume is emerging as a major factor of disrupting the living and working environment. In this situation, citizens are increasingly complaining about the traffic noise. The noise level of in major cities in Korea is serious and affects on citizens physically and psychologically. Many people live in residential areas around crowed roads in major cities, such as Seoul. Accordingly, the purpose of this study is to predict outside noise distribution of building through survey and simulation to make better sound insulation performance research. The result of this study shows that the traffic noise is influenced from ground 50m and analyzed that form of building and arrangement type must be considered to the level of noise decrease.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.742-749
• /
• 2006

For the purpose of finding if aircraft noise annoyance response is affected to variables when noise survey is performed, the questionnaire survey is conducted around the Gimpo International Airport in Seoul, Republic of Korea. This residential area is exposed to the aircraft noise and road traffic noise, simultaneously. Research areas are classified according to three different aircraft noise exposure levels expressed in WECPNL, under 75, between 75 and 80, and above 80 WECPNL, on aircraft noise map. The 7-step numerical magnitude with verbal category scales is used to measure the annoyance level. This surrey suggests that aircraft noise annoyance is not affected to an important extent by other noise sources (road traffic noise, community noise) and demographic variables (sex, age, education, occupation, dwelling type, length of residence). Aircraft noise annoyance would be related to complaint activity which is one of attitudinal variables.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.153-158
• /
• 2012

Noise maps are produced according to 'The Method of making a Noise Map' in order to noise control efficiently, and prediction model to predict road traffic noise which may apply to Korean situation, include CRTN, RLS 90, NMPB, Nord 2000 and ASJ 2003. Of them, ASJ 2003, Japan's prediction model has not been verified for the application to Korean situation according to the classification of vehicle. In addition, ASJ 2003 was revised to ASJ 2008 recently, a classification for motorcycle was added. This study attempts to check the classification of vehicle in ASJ 2008 and 'The Method of making a Noise Map' to confirm the suitability of the application of them to Korean situation.