• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.57-68
• /
• 2022

This study analyzed the status of international address standardization and reviewed responses of nations contained in the ISO/CD 19160-2-N5652 standard document. It identified problems in Korea's responses to the standard document, and presented ways of improvement. International standard procedures for ISO 19160-2 are underway with the goal to its completion by July 2023. To create an international standard, continuous monitoring and responses are required, and efforts to reflect the strength of the Korean addressing system on the new standard is needed.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.105-118
• /
• 2022

The demand for information related to 3D spatial objects model in metaverse, smart cities, digital twins, autonomous vehicles, urban air mobility will be increased. 3D model construction for spatial objects is possible with various equipments such as satellite-, aerial-, ground platforms and technologies such as modeling, artificial intelligence, image matching. However, it is not easy to quickly detect and convert spatial objects that need updating. In this study, based on spatial information (features) and attributes, using matching elements such as address code, number of floors, building name, and area, the converged building DB and the detected building DB are constructed. Both to support above and to verify the suitability of object selection that needs to be updated, one system prototype was developed. When constructing the converged building DB, the convergence of spatial information and attributes was impossible or failed in some buildings, and the matching rate was low at about 80%. It is believed that this is due to omitting of attributes about many building objects, especially in the pilot test area. This system prototype will support the establishment of an efficient drone shooting plan for the rapid update of 3D spatial objects, thereby preventing duplication and unnecessary construction of spatial objects, thereby greatly contributing to object improvement and cost reduction.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1441-1451
• /
• 2015

As one of the most spotlighted research areas, these days, the Internet of Things (IoT) aims to provide users with various services through many devices. Since there exist so many devices in IoT environments, it is inefficient to manually configure the domain name system (DNS) names of such devices. Thus, for IPv6-based IoT environments, this paper proposes a scheme called the DNS Name Autoconfiguration (DNSNA) that autoconfigures an IoT device's DNS name and manages it. In the procedure for generating and registering an IoT device's DNS name, the standard protocols of the Internet Engineering Task Force (IETF) are used. Since the proposed scheme resolves an IoT device's DNS name into an IPv6 address in unicast through a DNS server, it generates less traffic than multicast-based mDNS (Multicast DNS) which is a legacy DNS application for the DNS name service in the smart home. Thus, the proposed scheme is more appropriate in multi-hop IoT networks than mDNS. This paper explains the design of the proposed scheme and its service scenarios, such as smart home and smart road. It also explains the implementation and testing of the proposed scheme in the smart grid.

• Electronics and Telecommunications Trends
• /
• v.26 no.6
• /
• pp.77-85
• /
• 2011

2011년 7월에 도로명과 건물번호를 사용하는 새로운 주소 체계인 도로명주소가 고지되었다. 본 고에서는 100년 가까이 사용한 지번주소를 대체하기 위한 도로명주소와 관련 사업 등의 추진 동향을 살펴보고, 현재 추진상에서 쟁점이 되는 사항들과 도로명주소 등의 추진에 관련된 기술적인 이슈 및 동향 등에 대해서 살펴보기로 한다. 이를 위해서 기존 주소의 문제점 개선과 국제적인 표준 동향에 따르기 위한 도로명주소의 추진 상황과 국가의 기관별로 구역설정을 공통으로 활용하기 위한 구역번호의 추진 상황을 살펴본다. 도로명주소 추진 상황을 더욱 이해하는 차원에서 최근에 제기되고 있는 건물 단위의 행정구역과의 불일치 문제, 도로명의 표기 문제, 동과 공동주택 명칭 사용 제외 등에 대한 쟁점사항을 소개한다. 그리고 도로명주소와 관련된 기술적 이슈 및 동향들을 GIS 기술과의 결합, 데이터 정제 기술, 상세 주소의 정형화를 통한 데이터 호환, 정보시스템의 구현 및 연계 기술, 국제 표준화를 위한 대응, 우편물류 분야 측면에서 각각 살펴본다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.45-52
• /
• 2015

The interoperability of multi-source data has become more important due to various digital maps, produced from public institutions and enterprises. In this study, the automatic matching algorithm of multi-source building data using hierarchical matching was proposed. At first, we divide digital maps into blocks and perform the primary geometric registration of buildings with the ICP algorithm. Then, corresponding building pairs were determined by evaluating the similarity of overlap area, and the matching threshold value of similarity was automatically derived by the Otsu binary thresholding. After the first matching, we extracted error matching candidates buildings which are similar with threshold value to conduct the secondary ICP matching and to make a matching decision using turning angle function analysis. For the evaluation, the proposed method was applied to representative public digital maps, road name address map and digital topographic map 2.0. As a result, the F measures of matching and non-matching buildings increased by 2% and 17%, respectively. Therefore, the proposed method is efficient for the matching of building polygons from multi-source digital maps.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.57-66
• /
• 2011

The purpose of this study is to research into a method of selecting the subject parcel with a change in the category of land given surveying the land alteration state focusing on the present state of road in the government-owned and public land by using the fuzzy membership function and GIS spatial analysis. It selected the old town center of Incheon Jung-gu, and the new downtown & the forest land of Gyeyang-gu as the research subject region, and carried out GIS spatial analysis on a serial cadastral map, urban planning road layer of Korea Land Information System, practical width of road layer of Road Name Address Management System & cadastral data base, and then calculated the suitable index for the subject parcel with a change in the category of land by using the fuzzy membership function with having the critical value as the area ratio of each parcel on a serial cadastral map that was incorporated into road layer or practical width of road layer. It finally selected the parcel, which is different in land category from the real land usage, as the final subject parcel for altering land category, by using the screen of visualizing the suitable index and the aerial ortho photograph. As a result of the final selection, the fuzzy GIS spatial analysis method, which was suggested in this study, is judged to be efficient in the selection period and the methodology compared to the existing manual method. It could be confirmed to be more suitable method for downtown than forest land and for the new downtown than the old town center.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.186-192
• /
• 2021

Recently, the demand for more precise and demand-oriented customized spatial information is increasing due to the 4th industrial revolution. In particular, the use of 3D spatial information and digital twins which based on spatial information, and research for solving social problems in cities by using such information are continuously conducted. Globally, non-face-to-face services are increasing due to COVID-19, and the national policy direction is also rapidly progressing digital transformation, digitization and virtualization of the Korean version of the New Deal, which means that 3D spatial information has become an important factor to support it. In this study, physical objects for cities defined by world organizations such as ISO, OGC, and ITU were selected and the target of the 3D object model was limited to buildings. Based on CityGML2.0, the data collected using a drone suitable for building a 3D model of a small area is selected to be updated through road name address and building ledger, which are administrative information related to this, and LoD2.5 data is constructed and urban space. It was intended to suggest an object update method for a 3D building among data.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.261-283
• /
• 2013

ISBP745 has new provisions about sea waybill, road, rail or inland waterway transport documents which ISBP681 did not have provisions about. The main revisions of ISBP745 which were not existent or different from ICC Opinion are as follows: First, where B/L is required when multimodal transport is used as a modes of transport, the revisions stipulates that it is subject to UCP600 article19. this differs from previous ICC Opinion. Second, when a credit requires a transport document to indicate the name, address and contact details of a delivery agent, for the place of final destination or port of discharge, the address need not be one that is located at the place of destination or port of discharge or within the same country as that of the place of destination or port of discharge. Third, in case there exist a number of shippers and a consignee, multiple transport documents are issued. This rule has a clear stipulation on this case. Transport industry regards the indication of "LCL/FCL" or "CFS/CY" common in this case as that requiring multiple transport documents. However, ISBP745 does not regard it the case as that requiring multiple transport documents. This may cause some confusion in examination of documents. Forth, when partial shipment is allowed, and more than one set of original transport documents are presented as part of a single presentation made under one covering schedule and incorporate different dates of shipment, the earliest of these dates is to be used of the calculation of an presentation period.