• 제목/요약/키워드: Road Mobile Emission

검색결과 34건 처리시간 0.031초

실 주행 자료를 이용한 도로유형·시간대별 연료소모량 차이 검증 및 배출계수 보정 지표 분석 (Analysis on the Correction Factor of Emission Factors and Verification for Fuel Consumption Differences by Road Types and Time Using Real Driving Data)

  • 이규진;최기주
    • 대한교통학회지
    • /
    • 제33권5호
    • /
    • pp.449-460
    • /
    • 2015
  • 현재 교통수요모형 기반의 자동차 배출량 추정 모형에서 교통 활동도 자료는 세부적으로 고려되는 반면, 배출계수는 평균적인 값만 반영되고 있기 때문에 배출량 산정 결과의 정확도를 저하시키는 문제가 있다. 본 연구는 도로유형 및 주행시간대와 무관하게 동일한 배출계수가 적용되는 부분을 개선하기 위해, 도로유형과 주행시간대별 연료소모량 차이에 대한 실증적 분석을 기반으로 각 유형별 배출계수의 보정 지표 제시를 목적으로 한다. 이를 위해, '이동식 차량활동도 모니터링 장비(Portable Activity Monitoring System: PAMS)'를 이용해 도로유형 주행시간대별 실 주행 자료를 수집하였고, 각 유형별 연료소모량을 추정하여 이를 비교하였다. 연구 결과 평균 주행속도가 22.5km/h 일 경우, 도로 유형별 주행차량의 가감속도 변화 등의 차이에 따라 국도에서의 연료소모량(95g/km)은 자동차 전용도로에서(81g/km)보다 약 17.3% 높은 것으로 분석되었고, 첨두시간대의 평균 연료소모량(86.73g/km)은 비첨두시간대(82.84g/km)보다 약 4.7% 높은 것으로 분석되었다. 각 유형별 연료소모량의 차이는 공변량 분석 (ANOCOVA)과 다변량 분산분석 (MANOVA)으로 검증하였으며, 그 결과 "주행속도가 동일할지라도, 도로유형과 주행시간대에 따라 연료소모량의 차이가 있다"는 본 연구가설은 유의한 것으로 나타났다. 마지막으로 연료소모량의 차이를 활용하여 각 유형별 배출계수 보정 지표들을 제안하였다. 본 연구는 기존 차량 중심의 배출계수 연구에서 벗어나, 도로 교통 조건에 따른 배출계수 특성을 분석했다는 점에서 의의가 있으며, 본 연구결과를 활용하여 교통부문의 배출량 추정결과에 대한 신뢰성을 향상시킬 수 있을 것으로 기대한다.

건설장비와 농기계에서 배출되는 연도별 대기오염 배출량 변화추세 (Annual Trends of Air Pollution Emission from Construction and Agricultural Equipments)

  • 신문기;김호정;장영기;홍지형
    • 한국대기환경학회지
    • /
    • 제19권6호
    • /
    • pp.805-810
    • /
    • 2003
  • The annual air pollution emissions from construction and agricultural equipments were estimated from 1987 through 2000. The annual numbers and operation hours of 5 major construction equipments (Excavator, Bulldozer, Loader, Fork lift, Crane) and 3 major agricultural equipments (Power Tiller, Agricultural Tractor, Combine) were investigated for emission estimation. And monthly variation factors of operation hours of construction equipment were investigated too. The NO$_{x}$ emission from construction equipment have been gradually increased since 1987 to 1997, but sharply decreased as -45% in 1998 due to economic crisis in Korea. The NO$_{x}$ emission was estimated as 64,300 ton/year from construction equipment, and as 23,300 ton/year from agricultural equipment in 2000.000.

철도 디젤차량에서 배출되는 가스상 오염물질의 배출량 추정 (Estimation of Gases Air Pollutants Emission Rates Exhausted from Railroad Diesel Rolling Stocks)

  • 박덕신;배상호;정우성;김태오
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(III)
    • /
    • pp.467-472
    • /
    • 2003
  • Of those off-road diesel engines, the railroad diesel rolling stocks (RDRS) for passenger and freight transportation become a growing issue since they are emitting enormous amounts of various air pollutants. Furthermore, up to the present time, emissions from these sources are not well controlled. One of main purposes in this study is to develop emission factors for the RDRS and to estimate a total amount of major air pollutants from the RDRS in Korea. Prior to develop a Korean mode emission factor, the emission factor from the USEPA was simply applied for comparative studies. As a conclusion, based on the emissions calculated from both the USEPA mode and the KoRail mode, the RDRS is considered as one of significant mobile sources of major air pollutants including NOx and CO, and thus management plans and control strategies for the RDRS must be established to improve air quality near. future in Korea.

  • PDF

서울시 노원구 도로상 극미세입자 오염도 공간분포 특징 (Characteristics of spatial distribution of ultrafine particle number concentration on the roads of Nowon-gu, Seoul)

  • 이승복;이동훈;이승재;진현철;배귀남
    • 한국입자에어로졸학회지
    • /
    • 제7권1호
    • /
    • pp.21-30
    • /
    • 2011
  • The spatial distributions of air pollutants, in particular, ultrafine particles near traffic congestion roads at urban areas need to reduce human exposure levels for protecting public health. In this study, the number concentrations of ultrafine particles larger than 5 nm were measured every second during driving on the major roads of Nowon-gu, Seoul for 1.6 h using a mobile emission laboratory on October 5, 2010. The ultrafine particle number concentrations ranged from 7,009 to $265,600particles/cm^3$ with an average of $55,570particles/cm^3$, and these levels were comparable to concentrations of ultrafine particles larger than 3 or 7 nm on the arterial roads at urban areas in Los Angeles, USA and Zurich, Switzerland. It was frequently observed that the ultrafine particle number increased rapidly when vehicle speed was accelerated and it decreased sharply when vehicle speed was decelerated. The high peak events of ultrafine particle concentration larger than $200,000particles/cm^3$ were observed seven times during the measurement period. From the three repeated measurements during the short period of 50 min, it was concluded that the ultrafine particle number concentration on the road was significantly time-dependent. This on-road measurement approach can be utilized to manage vehicle-related air pollution in urban.

도로이동오염원 배출량 산정을 위한 Bottom-Up Approach 기법의 개선에 관한 연구 (An Improvement of Bottom Up Approach for Estimating the Mobile Emission Level)

  • 최기주;이규진;안성채
    • 대한교통학회지
    • /
    • 제27권4호
    • /
    • pp.183-193
    • /
    • 2009
  • 교통 환경문제로 대표되는 차량의 배기가스에 의한 대기오염은 삶의 질과 국민보건에 대한 관심뿐 아니라 범세계적인 문제로 인식되고 있다. 본 연구에서는 교통수요모형과 GIS를 이용하여 도로이동오염원에 대한 시공간적 고해상도의 배출량 산정 방식을 제시하여 정부와 지자체가 효과적으로 대기 질 개선 정책을 수립 추진할 수 있는 기반을 마련하고자 하였다. 이에 차량의 통행특성을 반영하는 Bottom-Up Approach 기법을 기반으로 총 주행거리를 실측치로 보정한 교통모형과 차량의 특성에 적합한 배출계수를 적용할 수 있는 대기모형을 이용한 개선된 기법을 제시하였다. 즉, 새로운 대안으로 교통-대기 통합패러다임에 의해 이를 연계한 도로이동오염원의 배출량 산정기법을 제시함으로써, 도로이동오염원 배출량의 신뢰도 개선이 기대되어진다.

차량 추적 실험을 통하여 디젤 후처리 장치가 입자상 물질 배출에 미치는 영향 파악 (On-road Investigation of PM Emissions of Diesel Aftertreatment Technologies (DPF, Urea-SCR))

  • 이석환;김홍석;박준혁;조규백
    • 한국자동차공학회논문집
    • /
    • 제19권5호
    • /
    • pp.92-99
    • /
    • 2011
  • To measure the traffic pollutants with high temporal and spatial resolution under real conditions, a mobile emission laboratory (MEL) was designed. The equipment of the mini-van provides gas phase measurements of CO, NOx, $CO_2$, THC (Total hydrocarbon) and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and a condensation particle counter (CPC). The inlet sampling port above the bumper enables the chasing of different type of vehicles. This paper introduces the technical details of the MEL and presents data from the car chasing experiment of diesel bus equipped with aftertreatment system. The dilution ratio was calculated by the ratio of ambient NOx and tail-pipe NOx. Most particles from the diesel bus were counted under 300 nm and the peak concentration of the particles was located between 30 and 60 nm. The total PM number emission from diesel bus equipped with DPF was 10 orders of magnitude lower compared to those emitted from base diesel bus. And the total PM number emission from diesel bus equipped with SCR was comparable to the particle emission from base diesel bus.

화물차 적재 방식에 따른 축 하중을 고려한 타이어 먼지 중 PM10 발생량 평가기법 연구 (Study on the assessment methodology for the PM10 generated from tire-dust considering the axle load of the truck according to the loading method)

  • 이은정;이희관
    • 도시과학
    • /
    • 제11권2호
    • /
    • pp.45-54
    • /
    • 2022
  • Recently, regulations on automobile exhaust gas emission are being strengthened. Accordingly, automobile exhaust gas emissions are expected to decrease and continue to decrease. On the other hand, many countries do not yet consider the emission of non-exhaust air pollutants from automobiles as important. Automobile non-exhaust substances are classified into three categories: tire dust emissions, brake wear emissions, and road scattering dust. In particular, in the case of tire dust, research results exist that pollutant emissions increase as the weight of a vehicle increases. Since the weight of trucks varies according to the load and the load along the axles is also different, it can be expected that the emission of PM10 from the tire dust will be different depending on the loading method. Therefore, this study was conducted on the amount of PM10 generated in tire dust considering the axle load of the truck according to the loading method. However, it was confirmed that the total amount of PM10 was less than that all loads are loaded in the front or rear when the load was evenly distributed in the front and rear of the cargo compartment. In particular, if the load is distributed evenly in the front and back of the cargo compartment and the load in the front part is divided into 2 to 6 and loaded, as the number of divided loading increases the amount of PM10 generated decreases. And when the load is divided into 6 pieces, the total amount of PM10 generated is 0.3952g, the minimum value. If the load is divided into 6 or more and loaded evenly, the total PM10 generated continuously increases and converges to about 0.3964g.

이동형 배출가스 측정시스템(MEL)을 이용한 디젤 및 가솔린 차량에서 배출되는 입자상 물질 평가 (On-Road Investigation of PM Emissions of Passenger Vehicles Fuelled with Diesel and Gasoline Using Mobile Emission Laboratory)

  • 이석환;김홍석;박준혁;우세종
    • 대한기계학회논문집B
    • /
    • 제36권7호
    • /
    • pp.737-744
    • /
    • 2012
  • 차량에 의한 대기오염을 실제 주행 조건에서 시간과 공간에 구애받지 않고 실시간으로 측정하기 위하여 이동형 배출가스 측정장치(MEL)가 제작되었다. 미니밴 차량에 CO, NOx, $CO_2$와 같은 배출가스 측정 장비와 입자의 수농도 및 입경별 개수농도 분포 측정을 위한 FMPS, CPC가 탑재되었다. 차량 전단에 장착되는 흡입 샘플링 포트를 사용하여 여러 종류의 차량 추적 실험을 수행하였다. 본 연구에서는 MEL의 상세 사양 및 이를 이용하여 디젤 및 가솔린 연료를 사용하는 승용차량들을 추적 실험한 결과를 나타내었다. 디젤 차량에서 배출되는 입자의 수농도는 가솔린 차량에서 배출되는 입자의 수농도보다 높았으며 다량의 극미세입자를 포함하고 있었다. 하지만, 직접분사식 가솔린 차량은 DPF가 장착된 디젤 차량에 비하여 50 nm 이상의 입경 영역에서 입자의 농도가 높은 경향을 보였다.

교통환경정책의 대기질 개선효과 분석 방법론 연구 (Analysis Method for Air Quality Improvement Effect of Transport and Environment Policy)

  • 이건우;한진석
    • 대한교통학회지
    • /
    • 제35권1호
    • /
    • pp.37-49
    • /
    • 2017
  • 본 연구에서는 도로이동오염원을 대상으로 추진하는 교통환경정책의 대기질 개선효과 분석 방법론을 제시하였으며, 해당 방법론은 정책 추진에 따른 도로이동오염원의 통행량과 대기오염물질 배출량 변화, 대기오염물질의 공간적 확산과 이로 인한 노출인구의 건강영향을 순차적으로 고려한다. 특히 도로이동오염원의 통행량 변화는 정책 효과와 직접적인 연관이 있기 때문에 대기질 개선효과 분석시 반드시 고려되어야 하며, 본 연구에서는 교통수요모형 기반의 상향식 방법을 적용하여 기존 하향식 방법 대비 정책 추진에 따른 통행자의 통행행태 변화를 상세하게 반영하고자 하였다. 정책 시나리오 분석을 통하여 본 연구에서 제시한 분석 방법론의 활용가능성을 검토하였으며, 통행자의 통행행태 변화가 예상되는 정책의 대기질 개선효과 분석은 본 연구의 분석 방법론 적용이 필요한 것으로 판단된다.

도로상의 배출가스 측정에 의한 배출계수 및 연료소비효율 산출 연구 (On-Road Testing and Calculation of Emission Factor and Fuel Economy)

  • 이태우;이범호;조승환;박준홍;엄명도;김종춘;이대엽
    • 한국자동차공학회논문집
    • /
    • 제17권3호
    • /
    • pp.90-101
    • /
    • 2009
  • An objective of this study is to suggest a procedure to evaluate vehicle emissions regardless of the driving pattern. Field experiments using portable emission measurement system were conducted under the real world driving cycle. Standardized average for NOx, $CO_2$ emission and fuel consumption rates were calculated while the vehicle specific power distribution within each vehicle speed bin was taken into consideration. Composite emission factor and fuel economy, which were obtained based on the standardized average results and traffic statistics, showed good similarity to those acquired through the conventional chassis dynamometer tests qualitatively as well as quantitatively. Considering that a conventional method obviously has a limitation to reflect various characteristics of the real world, the new approach suggested in this study can be used as an alternative procedure to collect more specific data to establish the mobile emission factors.