• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.1-8
• /
• 2012

도로의 평면 선형은 도로의 안정성과 교통 용량과 관계가 깊다. 도로의 효율적인 유지 관리와 기준에 대한 적합성 평가를 위해서는 도로의 평면 선형을 정확하게 분석하는 방법이 필요하다. 최근 Lidar자료나 GPS를 이용한 도로의 평면 선형 연구가 진행되고 있으나 넓은 지역에서의 평면 선형 곡선 반경을 분석하기에는 여러 가지 문제점을 가지고 있다. 본 연구에서는 수치지형도의 도로중심선을 이용하여 곡선 반경이 도로 구조 시설기준에 적합한지 여부를 평가하는 도구를 GIS 상에서 구현하고자 한다. 또한 $ESRI^{(R)}$ $ArcObject^{TM}$와 프로그래밍 언어인 비주얼 베이직(Visual Basic)을 사용해 도로의 평면선형을 자동적으로 산정할 수 있는 인터페이스를 설계 구현하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.413-416
• /
• 2007

To construct road spatial information database, it is the main object of this study that an analysis of road factors and furthermore this is used to the rescue activities in case of urban disasters. When urban disasters such as earthquake or explosion cause fire and collapses people of the affected region happen to evacuate. But only to manage roads and monitor traffic volume, the road data is designed and managed using digital topographic map so it is short that the design of road spatial data to prevent disasters. In this study, we tried to suggest the evaluative factors of evacuation to design database : road width, traffic volume, the fixed or movable obstacles installed, the surrounding environments that dominate the land-use planning, the uses, materials, structures, sizes, and densities of the buildings. Thus, these could provide fundamental data to determine the disasters management planning for evacuation and rescue activities, to evaluate the riskiness, and to draw up hazard information map.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.117-127
• /
• 2004

A risk analysis on the cutting slope of roads near Cheongju area was carried out with the data from geological map, field investigation, and laboratory test and with the Geographic Information System. A risk analysis method on the cutting slope of road using the Geographic Information System was developed with the data from geological map, field investigation and laboratory tests. In the GIS, road factors which are safety factor, class of road, slake index, slope-protection works, and height of slope in the cutting slopes are classified into some ranks, and their weighting factors were taken into account. This method can be applied effectively to a road management.

• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.1046-1052
• /
• 2016

For the safe driving of autonomous vehicles, accurate position estimation is required. Generally, position error must be less than 1m because of lane keeping. However, GPS positioning error is more than 1m. Therefore, we must correct this error and a map matching algorithm is generally used. Especially, road marking intensity map have been used in many studies. In previous work, 3D LIDAR with many vertical layers was used to generate a local intensity map. Because it can be obtained sufficient longitudinal information for map matching. However, it is expensive and sufficient road marking information cannot be obtained in rush hour situations. In this paper, we propose a localization algorithm using an accumulated intensity local map. An accumulated intensity local map can be generated with sufficient longitudinal information using 3D LIDAR with a few vertical layers. Using this algorithm, we can also obtain sufficient intensity information in rush hour situations. Thus, it is possible to increase the reliability of the map matching and get accurate position estimation result. In the experimental result, the lateral RMS position error is about 0.12m and the longitudinal RMS error is about 0.19m.

• 한국측량학회지
• /
• 제29권1호
• /
• pp.63-69
• /
• 2011

대용량의 공간정보의 인터넷을 통한 활용이 활성화되면서 더 정확하고 풍부하며 최신의 정보를 가진 자료에 대한 사용자의 요구는 꾸준히 증가하고 있어 기 구축된 자료 간 융합을 통합 새로운 서비스 제공의 필요성이 커지고 있다. 이중에서 항공사진과 도로 벡터 자료를 융합한 서비스는 직관적이고 정확하게 정보를 전달 할 수 있어 많은 포털사이트에서 제공중인 서비스이나 자료 간 공간 불일치를 해결해야 한다. 본 연구에서는 도로 후보 영상 추출, 템플릿 매칭, 벡터 미디언 필터를 거쳐 자료 간 조정을 수행하였으며 완성도와 부합도로 정확도를 평가한 결과 원래 데이터에 비해 약 35% 향상되었음을 확인할 수 있었다.

• 한국BIM학회 논문집
• /
• 제8권4호
• /
• pp.72-79
• /
• 2018

Rapid developments around the world have resulted in urban expansion, habitat destruction, habitat fragmentation, and pollution problems, which are the main reasons for the decline in biological diversity. The United Nations warns that many animals and plants will die out in the near future if this continues. This study was performed to propose a map of eco-corridor suitability analysis of Korean water deer(Hydropotes Inermis) to enhance biodiversity in Chuncheon city. Eight factors affecting habitat suitability were elevation, aspect, slope, forest type, distance to the road, distance to the stream, land use and green connectivity. Previous study analysis on the mobility behaviour of the Korean water deer(Hydropotes Inermis) produced a habitat suitability map by determining the threshold and assigning a value between 0 and 1 depending on the habitat suitability using the fuzzy function. A method of analysis was proposed for a number of eco-corridor through comparative analysis of the data from the produced habitat suitability map and the road-kill point. The previous studies were focused on Backdudaegan region and national parks except for urban cities. The potential habitat map of Korean water deer could be helpful as a way to prevent habitat disconnection and increase species diversity in urban areas.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.84-99
• /
• 2021

마이크로 모빌리티 시장 규모가 성장함에 따라 오르막길 정보를 포함한 경로 안내에 대한 수요가 증가하고 있다. 전동모터에 따라 등판 각도가 다르므로 임계치 기준별 오르막길 정보구축이 필요하다. 도로의 선형정보는 주행의 안전성과 쾌적성을 좌우하는 매우 중요한 요소임에도 전자지도에 종단 경사도에 대한 정보는 부재하다. 자율주행차 시대를 대비하여 구축 중인 정밀도로지도는 기존 국가표준 노드링크와는 달리 고도정보를 추가 생성하였으나 일부 구간에만 고도정보가 있고 도로의 종단경사를 생성할 수 있는 정보는 여전히 부족한 실정이다. 이 연구에서는 현재 활용할 수 있는 데이터를 이용하여 도로의 종단 경사도를 산출하는 방안으로 국내 수치표고모델의 고도정보를 도로의 링크 정보와 매칭하는 방법을 제시하였다. 서울시 표준링크를 기준으로 4m 단위의 고도를 생성한 후 단위 거리당 개별 경사도를 산출하였다. 이를 활용하여 도로 링크 별로 대표 경사도를 부여한 후 마이크로 모빌리티가 운행할 수 없는 도로와 폭설시 노면이 미끄러워 운행할 수 없는 도로를 선정하였다. 또한, 도로 기반정보로 활용하는 수치표고모델의 한계점과 이슈를 설명하여 실제 활용 시 주의할 사항들을 기술하였다. 향후에는 본 연구의 결과를 바탕으로 기존에 부재했던 도로의 종단 경사 정보를 활용하여 다양한 융합 분석을 할 수 있기를 기대한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.709-714
• /
• 2008

The various computer programs are used in computer simulation of the traffic noise prediction. But the difference or problem of calculation method used for road traffic noise prediction is not exactly investigated. In this paper, Road traffic noise is predicted on the specific regions by using four prediction methods such as XPS31-133 model(France), RLS-90 model(Germany), ASJ RTN model(Japan) and FHWA model(U.S.A.), which are operated by a program named SoundPLAN, a program to predict road traffic noise. Those prediction values are compared with a measurement value. The results show that four prediction values for taraffic noise are a little different, because of various input factors according to the prediction methods.

• 대기
• /
• 제31권5호
• /
• pp.525-537
• /
• 2021

Black ices on road surfaces in winter tend to cause severe and terrible accidents. It is very difficult to detect black ice events in advance due to their localities as well as sensitivities to surface and upper meteorological variables. This study develops a methodology to detect the road sections vulnerable to black ice with the use of road surface temperature data obtained from a mobile road weather observation vehicle. The 7 experiments were conducted on the route from Nam-Wonju IC to Nam-Andong IC (132.5 km) on the Jungang Expressway during the period from December 2020 to February 2021. Firstly, temporal road surface temperature data were converted to the spatial data with a 50 m resolution. Then, the spatial road surface temperature was normalized with zero mean and one standard deviation using a simple normalization, a linear de-trend and normalization, and a low-pass filter and normalization. The resulting road thermal map was calculated in terms of road surface temperature differences. A road ice index was suggested using the normalized road temperatures and their horizontal differences. Road sections vulnerable to black ice were derived from road ice indices and verified with respect to road geometry and sky view, etc. It was found that black ice could occur not only over bridges, but also roads with a low sky view factor. These results are expected to be applicable to the alarm service for black ice to drivers.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 춘계공동학술대회
• /
• pp.429-436
• /
• 2006

Standardization strategy is considered as an important approach for the organization growth and competitiveness. Major contents of standardization are the selection of standardization area and management of standardization timing under limited resources. The developments of standardization road map and its driving strategy in construction area are important policy subjects in view of investment scale and national economy. In this paper, we aim to survey on the standardization theory and its application in construction field and suggest research direction for driving strategy of standardization road map development.