• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.118-122
• /
• 2005

Electro-chemo-mechanical devices or artificial muscles based on conducting polymers (CP) are presented as bilayers, CP/adhesive polymer, or as triple layers, CP/adhesive polymer/CP. Those soft and wet materials, working in aqueous solutions of a salt, mimic the composition of most organs from animals. Under electrochemical control, so working as new electrical machines, they produce continuous, reverse and elegant bending movements, mimicking those produce by animal muscles. By means of the current a perfect controls of the movement rate is attained giving soft and continuous movements. Muscles able to sense the chemical and mechanical conditions of work or muscle having tactile sense, as will be presented here, are being developed. All of them are founded on the non-stoichiometric nature of the soft and wet materials.

• Journal of Biosystems Engineering
• /
• 제28권2호
• /
• pp.89-96
• /
• 2003

This study was aimed to identify how the main body vibration of power tiller will be transmitted to the trailer, and to find out the basic information for demage reducing method of agricultural products during transportation. The vertical vibration acceleration level was measured at 6 positions, i.e. engine, hitch, seal and three parts of trailer (front middle, and rear) for the not driving but at the engine speeds of 1,000rpm and driving at 0.35m/s. The results of this research could be summarized as follows; 1. For not driving, the accumulated acceleration level up to 120Hz was 50% of total accelerations at engine part and those were 28~41% at other parts. Those up to 40Hz were 20~30% at engine and hitch part and 2~8% at trailer part. And those up to 20Hz were 13~20% at engine and hitch part and 1~4% at trailer part 2. For the driving with 0.35m/s at paved road, the average vertical accelerations were in the range of 0.005~0.058m/s$^2$. The lowest value of 0.005m/s$^2$ was showed at engine part and the value of 0.031-0.058m/s$^2$ was showed at trailer part. 3. For the driving with 0.35m/s, the accumulated value of average vertical accelerations showed the lowest value at engine parts md showed 5 times value of engine part at trailer part especially highest value at middle part of trailer. 4. For the driving with 0.35m/s, the accumulated acceleration level up to 120Hz was 75% of total accelerations at engine part and those were 20~42% at other parts. Ant those up to 20Hz and 40Hz were 24~26% at engine part and 0.1~0.6% at trailer part.

• Journal of Biosystems Engineering
• /
• 제33권3호
• /
• pp.151-156
• /
• 2008

This study was conducted to evaluate ride vibrations experienced by tractor operators during plowing, rotovating, and transporting operations in Korea. Field data of ride vibrations were taken at the operator-seat interface from 49 tractors and analyzed on the basis of ISO 2631-1 and EU Directive 2002/44. Of the measured ride vibrations 15.4% in the plowing and 12.5% in farm road transport exceeded the 8-hour fatigue decreased proficiency boundary in the fore and aft directions at frequencies from 1 to 5 Hz. 93.9% exceeded the 8-hour potential health risk of ISO 2631-1. The ride vibrations exceeding the 8-hour exposure limit were 38.5% in plowing, 31.6% in rotovating, 100% in farm road transport and 88.9% in concrete road transport. Although most tractor operators were not exposed to ride vibrations greater than the 8-hour exposure limit value (ELV) of EU Directive 2002/44, 7.7% of the operators in the plowing experienced greater vibrations than the ELV in the fore-aft direction. Farm road transport produced greater vibrations than any other operations. Concrete road transport, plowing and rotovating operations followed next. Limit criteria for ride vibration exposure differ depending upon the guidelines. Exposure limit of the health guidance caution zone of ISO 2631-1 is lowest among its kinds.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.501-512
• /
• 2002

Traction performance of off-road vehicles is estimated using slip-traction relationships Two zero condition accepted by ASAE have been used widely to obtain the slip-traction relationships of off-road vehicles. This study was carried out using the soil bin systems to investigate the characteristic of slip-traction curves obtained using two zero conditions defined by ASAE. which are driving and driven zero condition, and to present disadvantage of slip-traction relationship based on two zero conditions of ASAE. The results of this study are summarized as follows : 1. For the driving zero condition, the curve of slip-traction relationship shows some issues. The first question is that the slip is zero when the traction is zero. The second question is that the value of slip is smaller than that of corresponding real slip, as the rolling radius decreased f3r the setting zero condition with driving wheel. 2. For the driven zero condition. slip occurs when the traction is zero, which is more realistic results than driving zero condition. But when a zero condition is set, skid occurs and this result increased the rolling radius of tire and increased slip value f3r the specific traction value of whole slip range. This kind of trend was getting bigger as the soil is softer, or the tire inflation pressure is higher. 3. From the results of this study, it was found that slip-traction relationship obtained by two zero conditions of ASAE is not realistic in estimating the traction performance of off-road vehicles. And also slip-traction relationship obtained for the same experimental condition showed different result in accordance with chosen zero condition,

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.92-99
• /
• 2021

Agricultural tractors drive and operate both off-road and on-road. Tire-road interaction significantly affects the tractive performance of a tractor, which is difficult to predict numerically. Many empirical models have been developed to predict the tractive performance of tractors using the cone index, which can be measured through simple tests. However, a magic formula model that can determine the tractive performance without a cone index can be used instead of traditional empirical models as the cone index cannot be measured on asphalt roads. The aim of this study was to predict the tractive performance of a tractor using the magic formula tire model. The traction force of the tires on an asphalt road was measured using an agricultural tractor. The dynamic wheel load was calculated to derive the coefficients of the traction-slip curve using the measured static wheel load and drawbar pull of the tractor. Curve fitting was performed to fit the experimental data using the magic formula. The parameters of the magic formula tire model were well identified, and the model successfully determined the coefficient of traction of the tractor.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.737-744
• /
• 2012

차량에 의한 대기오염을 실제 주행 조건에서 시간과 공간에 구애받지 않고 실시간으로 측정하기 위하여 이동형 배출가스 측정장치(MEL)가 제작되었다. 미니밴 차량에 CO, NOx, $CO_2$와 같은 배출가스 측정 장비와 입자의 수농도 및 입경별 개수농도 분포 측정을 위한 FMPS, CPC가 탑재되었다. 차량 전단에 장착되는 흡입 샘플링 포트를 사용하여 여러 종류의 차량 추적 실험을 수행하였다. 본 연구에서는 MEL의 상세 사양 및 이를 이용하여 디젤 및 가솔린 연료를 사용하는 승용차량들을 추적 실험한 결과를 나타내었다. 디젤 차량에서 배출되는 입자의 수농도는 가솔린 차량에서 배출되는 입자의 수농도보다 높았으며 다량의 극미세입자를 포함하고 있었다. 하지만, 직접분사식 가솔린 차량은 DPF가 장착된 디젤 차량에 비하여 50 nm 이상의 입경 영역에서 입자의 농도가 높은 경향을 보였다.

• 농업과학연구
• /
• 제47권1호
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.15-24
• /
• 2023

The aim of this study was to measure and evaluate the exhaust emission factors of agricultural tractors. Engine characteristics and three exhaust emissions (CO, NO_x, PM) were collected under actual agricultural operating conditions. Experiments were performed on idling, driving, plow tillage, and rotary tillage. The load factor (LF) was calculated using the collected engine data, and the emission factor was analyzed using the LF and exhaust emissions. The engine characteristics and exhaust emissions were significantly different for each working condition, and in particular, the LF was significantly different from the currently applied 0.48 LF. The data distribution of exhaust emissions was different depending on the engine speed. In some conditions, the emission factor was higher than the exhaust emission standards. However, since most emission limit standards are values calculated using an engine dynamometer, even if the emission factor measured under actual working conditions is higher, it cannot be regarded as wrong. It is expected that the results of this study can be used for the inventory construction of a calculation for domestic agricultural machinery emissions in the future.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.83-88
• /
• 2015

농용 트랙터는 일반적인 도로 주행이 아닌 논 또는 밭과 같은 험지에서 작업용으로 사용한다. 때문에 정적 하중 뿐만 아니라 동적 하중이 고려된 구조 해석이 진행되어야 한다. 하지만 동적 입력 하중을 계산하기 위해서는 다양한 작업기와 하중조건을 모사해야 하기에 실제 측정에 많은 시간과 노력이 소요된다. 이러한 노력들을 줄이기 위해서 본 연구에서는 상용 자동차와 동일하게 농용 트랙터를 위한 4 축 도로하중 시뮬레이터(4-Post Road Simulator) 모델을 개발하였다. 입력하중을 검증하기 위해 사내 험로 시험장에서 차축의 가속도 값과 바디프레임의 변형률(strain)을 측정하였다. 가속도 값은 동역학 모델의 입력 하중으로 사용하고 모드 중첩 법을 포함한 동역학 해석을 수행하여 변형률을 검증하였다. 이를 통해 험로 프로파일과 유사한 거동을 나타내는 4 축 도로하중을 구할 수 있었으며 신뢰성을 검증하였다.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.399-406
• /
• 1999

This study was conducted to investigate the labor requirements and transportation cost of paddy for the different harvest and transportation systems for obtaining a basic reference to the improvement of present harvest-transportation systems. One hundred and eighty five farm households with sack type combine harvester and thirty farm households with bulk type combine harvester were surveyed for thirty counties from eight provinces except jeju and also eleven Rice Processing Complex were covered for this survey. This survey was carried from 8th. October 1997 to 5th. November 1997. For the labor requirements, bulk trailer system require 6.8th/ha, 10.3/ha for sack harvest-tractor trailer, and 8.8h/ha for bulk harvest-container bag. The machinery utilization cost for the different paddy harvest-transportation systems, combine sack harvest-tractor trailer system is 282 thousand won/ha, and most economical compared with other systems. Combine bulk harvest with tractor system was 416 thousands won/ha and combine bulk harvest with container bag system was 446 thousands won/ha. In order to propagate bulk harvest-transportation system, a proper bulk transportation means with considering road condition in the paddy field and paddy size should be developed, and considering cycle time it appeared that the proper capacity of bulk container was 3.5ton at the present.