• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.101-109
• /
• 1995

Axisymmetric and quasi-static finite element analysis of an inflated tire rotating with constant angular velocity and contact to road has been performed. Centrifugal force effect was added to load stiffness matrix and equation of effective material properties were calculated by the Halpin-Tsai formulation. In this report, radial truck/bus tire was analyzed. It was inflated and rotated at speeds up to 140 km/h. Then, contact problem was performed to calculate stress-strain field of tire wiht flat rigid road under the load due to the self-weight of a vehicle. Significant changes of stress-strain field of tire were observed in the finite element analysis. Shear stress, strain and strain energy density were rapidly increased at the dege of #2 belt at freely rotating state. This concentrated stress and strain made belt edge sparation. Under the condition of flat riged road contact, strain energy density of #2 belt, carcass turn-up part were concentrated and bigger values than only freely rotation state. Therefore, dynamic behaivor of tire has to considered as design factors which are affected to belt edge separation and bead breakage.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.47-54
• /
• 2012

Paved road dust emissions were investigated 14 times on 12 main roads in Seo-Cho Gu, Seoul, Korea by vehicle-based mobile sampling system(Road Dust Monitoring System) during September to December 2011. Also, fourteen heavy metals present in the dust samples were analyzed by ICP. ICP analysis showed that one of major source of the road dust would be urban construction. A large amount of silt was found, which might be originated mainly from building construction and open beds of trees. Trace element and pollution indices of heavy metals(Cd, Cu, Ni, Pb, Zn) on the roads adjacent to the commercial area had higher concentrations than those on the roads adjacent to the construction and residential areas because of traffic density and heavy traffic.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.84-85
• /
• 2003

A parallelized FEM code based on domain decomposition method has been recently developed for a large scale computational fluid dynamics. A 4-step splitting finite element algorithm is adopted for unsteady computation of the incompressible Navier-Stokes equation, and Smagorinsky LES(Large Eddy Simulation) model is chosen for turbulent flow computation. Both METIS and MPI library are used for domain partitioning and data communication between processors respectively. Tiburon of Hyundai-motor is chosen as the computational model at $Re=7.5{\times}10^{5}$, which is based on the car height. It is confirmed that the drag under road condition is smaller than that of wind tunnel condition.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.107-122
• /
• 2015

The purpose of this study is to analyze the structural stability of pavement due to water infiltration at the road with infiltration trench as using the FEM(finite element analysis). Five cases for FEM is divided considering the amount of rainfall and rain duration time. The results of FEM show that the more rainfall in a short period time is faster the change of moisture content. Also, it is the proportional relationship between and changing area of moisture content of more than 40% due to rainfall. Case 3 and 4 are necessary to check the installation of infiltration trench because of moisture content of more than 40%, recovery time of initial moisture content, and changing area of more than 40%. Case 1,2, and 5 have no a significant effect on road pavement structure due to lower moisture content and shorter duration time of higher moisture content.

• 한국방재안전학회논문집
• /
• 제12권2호
• /
• pp.57-63
• /
• 2019

서울시에서 2010년부터 2016년까지 발생한 도로함몰 발생 건수는 총 4,737건으로 매년 증가하여 사회문제도 대두되고 있다. 특히 도로함몰은 충적층이 두껍게 분포하는 송파구와 구로구에 집중되어 나타나는데 이는 하수관로 또는 지하철이 통과하는 지역의 지반특성이 큰 영향을 미치기 때문이다. 도로함몰에 대한 대책방안을 수립하기 위해서는 누수가 발생하는 구간에서의 지반특성과 지반거동의 관계를 정확하게 규명하는 것이 필요하다. 이 논문에서는 충적층에 가장 흔하게 나타나는 사질토와 점성토를 대상으로 개별요소법 프로그램 중 하나인 EDEM 프로그램을 이용하여 지층 내 공동의 위치 및 크기를 달리하여 시뮬레이션을 수행하였다. 그 결과 점성토 지반보다 사질토 지반에서 함몰 규모가 크게 발생한 것으로 나타났으며, 점착력이 없는 사질토 지반에서는 지하 공동의 깊이가 깊고 지하 공동의 규모가 증가할수록 도로함몰이 쉽게 발생하는 양상을 보인 반면, 점착력이 있는 점성토 모델에서는 지하 공동의 깊이가 얕을수록 도로함몰이 쉽게 발생하는 양상을 보였다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.247-255
• /
• 2008

현행 도로설계의 기준이 되는 "도로의 구조 시설 기준에 관한 규칙 해설 및 지침"에서는 설계속도에 따라 도로 선형별 최소 설계기준을 정하고 있으며, 이 기준을 만족시키면 교통안전성 이 확보되는 것으로 규정하고 있다. 이러한 설계기준에 적용되고 있는 개별 설계요소들은 원칙적으로 차량 및 운전자 특성을 감안하여 설치기준이 정립되었으나, 설계요소간의 연관성 또는 일관성에 대한 깊이 있는 연구를 통해 제반 기준이 정립된 것은 아니다. 결과적으로, 현재의 도로설계기준이 개별 설계 요소들의 조합에 의해 결정되는 도로의 안전성, 일관성 문제를 모두 고려하지는 못하였다. 따라서, 본 연구에서는 기존의 설계기준에 내재된 문제점을 인지하고 해결을 위해 우선적으로 3차원 가속도를 고려한 선형 설계방안에 대한 연구를 수행하였으며, 이를 통해 더욱 안전하고 조화로운 도로건설을 유도하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.466-471
• /
• 2019

Road photovoltaic power generation is a technology that combines photovoltaic power generation while maintaining the function of the existing road by installing special photovoltaic modules on it. In this paper, we developed three types of modules and structures suitable for sidewalk blocks and element technology for the development of a solar road module for a sidewalk and bicycle road. The road solar potential in Korea is 10 GW. After analyzing the daily data obtained after the construction of a 10 kW solar road testbed, it was found that its utilization rate compared to the general photovoltaic energy is 80%.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.39-47
• /
• 2016

PURPOSES : Road subsidence occurs owing to road cavities, which cause many social and environmental problems, especially in cities. Recently, road cavities were detected by various ground radars and repair works were carried out against the detected cavities. The condition assessments related to the road cavities are necessary to understand the potential risk of the cavities. Therefore, in this study, a numerical study was performed to assess the various conditions of road cavities. METHODS : The numerical method adopted in this study is the discrete element approach, and it is suitable for analyzing the condition because it can consider the movement of the soil particles in the surrounded cavity areas. In addition, the triaxial test was modeled and performed under various cavity conditions inside the specimens. RESULTS : The conditions of different cavity locations and shapes were analyzed to identify the effect of cavity state. Three general cases of particle size distributions were formulated to identify the effect of surrounding ground conditions. As a result, the degree of decrement and volumetric strain were varied depending on the locations and shapes of the cavity. Only minor changes were observed when the particle size distributions were altered. CONCLUSIONS : The strength reduction was higher when the cavity formed was larger and located in the upper zone. Similar to the cavity shape, strength reduction and volume deformation are more influenced by the width than the length of the cavities. There is an influence from ground conditions such as the particle size distribution, especially on the wide cavity.

• 한국지반환경공학회 논문집
• /
• 제13권1호
• /
• pp.15-20
• /
• 2012

본 논문에서는 서울OO고속도로 건설공사 노선에 있는 2곳의 광폭 4차로 터널의 계측항목별 측정결과를 정리한 계측분석 자료를 근거로 하여 터널굴착에 따른 주변지반의 움직임과 각 지보부재의 효과를 파악하고 공사의 안전성 및 경제성을 재평가하고자 하였다. 터널 노선에 대한 사전 지질조사 및 주변 구조물 현황을 조사 분석하여 터널굴착에 따른 주변 지반, 각 동바리 부재의 변위, 응력의 변화를 파악하여 설계, 시공의 안전성과 경제성을 확인하고, 또한 설계 기준값과 계측치를 비교 분석하여 실제 현장조건에 맞는 지보 수준을 평가하였다. 평가 결과 대부분의 구간에서 기준치(30mm)이하의 변형결과를 보였고 암반등급에 따라 시공된 지보재의 수준이 과대하게 산정되었음을 알 수 있었다. 따라서 공사의 효율성 및 경제성의 측면에서 고려해볼 때, 향후 지보재의 적정수준에 대한 발전된 연구가 진행되어야할 필요가 있다고 판단된다.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.299-308
• /
• 2010

The indirect approach for measuring the bridge frequencies from the dynamic responses of a passing vehicle is a highly potential method. In this study, the effect of road surface roughness on such an approach is studied through finite element simulations. A two-dimensional mathematical model with the vehicle simulated as a moving sprung mass and the bridge as a simply-supported beam is adopted. The dynamic responses of the passing vehicle are solved by the finite element method along with the Newmark ${\beta}$ method. Through the numerical examples studied, it is shown that the presence of surface roughness may have negative consequence on the extraction of bridge frequencies from the test vehicle. However, such a shortcoming can be overcome either by introducing multiple moving vehicles on the bridge, besides the test vehicle, or by raising the moving speed of the accompanying vehicles.