• Journal of the Korean Institute of Navigation
• /
• v.25 no.3
• /
• pp.247-256
• /
• 2001

This study aims to develop the information service system of integrated seakeeping performance for seagoing vessels. It has been successful in developing the intended system which has made possible to provide the following functions and capabilities. o immediate computation of the dynamic motions of a ship against the present and future weather conditions; o evaluation of the integrated seakeeping performance of a ship on a real time basis and providing the navigators with the seakeeping informations on the spot enabling them to take the most appropriate countermeasures; and o supporting the navigators in the selection of a safe sailing route by providing the integrate seakeeping performance.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.137-139
• /
• 2003

As a part of numerical and experimental research works for the prediction and improvement of ship's maneuvering performance, a study on the performance analysis of two different rudders has been carried out. While the planform shape and the aspect ratio of the rudders have been fixed, section shape has been changed. Conventional type of HMRI NP section and special type of dolphin-tail section have been employed. Performances of the rudders have been investigated by using CFD and compared with experimental data obtained in a wind tunnel. A commercial CFD program has been used to solve the RANS equations. Two-equation k-ro model has been applied to close the governing equations. Block-structured grids are used in the numerical calculation. Based upon the calculation results, the rudder with dolphin-tail section has shown a possibility of significantly improving rudder performance if utilized as the section of ship rudders.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.9-20
• /
• 1989

It is important to enhance the safety of ship structures as much as possible in order to prevent the disastrous collapse of structures. In fact, the strength problem of structures is closely related with the safety problem of structures. Recently, the direct calculation method using a rational approach based on the first principle is implemented into the structural design process instead of adopting empirical approach based on the rules. The structural designer have shown increased concern with the problem of adequacy of conventional design method based on the safety factor since it does not fully take into account some degree of variability of the applied loads on and the strength of ship structures. To deal with the analysis of structures effectively, it is necessary to have three stages being equally treated. The first one is load analysis, second one response analysis, third one safety analysis. For marine structures, most of research effort has been however put into the first and second stages. The third stage is normally done by simple procedures. Hence, the various probabilistic methods are compared in order to establish the reliability analysis techniques for ship structures. As a result, the advanced level 2 method is selected as a most effective and accurate reliability method. The validity of this method is further demonstrated by comparing the results with the conventional method for the problem of the longitudinal strength of hull girder of Ro-Ro ship.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1377-1384
• /
• 2015

In this paper, a resource management scheme for preventing the video frame loss in the presence of network congestion is proposed. WiMedia protocol is suitable for the application that supports the real-time multimedia service in the ship area network since it supports high speed data transfer. However, network congestion causes the degradation of video quality, since WiMedia standard discards video frames regardless of importance of video frame. Therefore, a resource management scheme for WiMedia network is proposed in this paper. The proposed technique can intelligently treat the network congestion, and solve the degradation of video quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.964-973
• /
• 2015

Ship Area Network(SAN) can monitor the status of ship in real time and minimize the maintenance costs by connecting various devices to the network. In particular, among researches on SAN, Wireless Sensor Network using sensor nodes that is low-cost, low-power, and multifunctional has a number of advantages. In this paper, we propose cluster-based multi-channel algorithm considering the energy efficiency in wireless sensor network in a ship. The proposed algorithm shows the result of improvement of throughput and energy efficiency, because it reduces interference between clusters by using channel allocation algorithm that is distributed and dynamic.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.329-343
• /
• 2019

In order to simulate the evacuation simulation of a ship during a sinking, the slope angle change of the ship must be reflected during the simulation. In this study, the passenger evacuation simulation is implemented by continuously applying the heeling angle change during sinking. To reflect crowd behavior, the human density and the congestion algorithm were developed in this research and the walking speed experiment in the special situation occurring in the inclined ship was conducted. Evacuation simulation was carried out by applying the experimental results and the change of the walking speed according to the heeling angle of the ship. In order to verify the evacuation simulation, test items suggested by International Maritime Organization (IMO) and SAFEGUARD Validation Data Set conducted on a large Ro-PAX ferry (SGVDS 1) which performed real evacuation trial in full-scale ships were performed and the results of simulation were analyzed. Based on hypothetical scenario of when a normal evacuation command is delivered to the passengers of MV SEWOL in time, we predicted and analyzed the evacuation process and the number of casualties.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1314-1321
• /
• 2010

This system configures a position Sensor as installing on the ship and a guidance system docking of ship what distinguish of the ship about the use and size. The maintain system is received the result of distinction via UWB reader. This system send a information of ship of docking position to user. Thus it suggests the safety to prevent from crash among ships and saves energy and stop waste. The proposed system periodically updates the information of docking position of the ship and monitors in real-time according to the user's request from personal mobile devices. In this paper, we implement of a guidance system Testbed for docking of the ship using position UWB sensor. And user is provided convenience to find easily user's ship in docking area through user interface with Java. Addedly it is possible to prevent ship theft.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.69-75
• /
• 2010

A model ship equipped with the Weis-Fogh type ship's propulsion mechanism, which is consisted of one wing in a squared channel, was constructed. Sailing and vibration tests of the model ship were performed with the opening angles in a pool. The results are summarized as follows. The thrust and the speed of model ship were the highest for the spring-type wing of which the opening angle is automatically controlled in one stroke. Moreover, these values were approximately reduced by 4% from $30^{\circ}$ opening angle to $15^{\circ}$ in order. The maximum amplitude and RMS values of the model ship were the lowest for the wing having the opening angle of $30^{\circ}$, but were the largest for spring-type wing. And in case of the same opening angle, these values were lower for the ship on sailing than that on stationary.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.1-7
• /
• 2005

In order to secure the traffic safety especially in the entrance waterway of harbour, it is important that the breakwater and the port facilities should be designed properly considering ship-handling difficulty and traffic flow. In this study, the lateral force acting on ship hull under the external force(wind, current, wave) is investigated quantitatively for the container ship approaching to the Busan and Gamcheon breakwater. The relation of ship-handling difficulty to the breakwater and the arrangement of ship's routine are examined based on the lateral force under the external force. Some of reviews to secure traffic safety on the design of breakwater are discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.760-768
• /
• 2009

In this paper, we propose the energy efficient transmission parameter selection method for Wireless Personal Area Network (WPAN) system which is applied to e-Navigation system considering various ship models environment. An appropriate selection of transmission parameters of HR-WPAN system is very essential to be considered for saving WPAN devices' energy consumption, when HR-WPAN system is applied to ship area network (SAN). Therefore, we propose an energy consumption model for a ship area network employing IEEE 802.15.3 based CSMA/CA HR-WPAN model and analyze the effect of transmission parameter selection on the performance of energy consumption. In particular, the path loss is the major performance decision parameter for the SAN employing HR-WPAN system, since it varies according to the material of shipbuilding such as steel(for large ship), FRP(for medium size ship) and compound wood(for small ship). Thus, we analyze and demonstrate that the proper transmission parameter selection of transmit power, PHY data rate and fragment size for each ship model could guarantee energy efficiency.