• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.59-67
• /
• 1993

The variations of the natural frequencies and the peak response acceleration at the top of prestressed concrete reactor building due to random variability and/or model uncertainty of structural parameters are studied. The results may be used as essential input parameters in seismic probabilistic risk assessment or seismic margin assessment of the reactor building. The sensitivity test of each structural parameter is first performed to determine the most influential parameter upon the natural frequency of structure model. Then Monte Carlo simulation technique is applied to evaluate the effect of parameter variation on the natural frequencies and the peak response acceleration. The acceleration time history is obtained by direct integration scheme. As the study results, it is found that the fundamental natural frequency and the peak response acceleration at the top of the building are most strongly affected by Young's modulus among the structural parameters, in which the value of mean plus one standard deviation obtained by probabilistic approach deviates up to about (+)12% from the result of deterministic method. Considering the uncertainty of flexural rigidity, the structural responses vary in range of (-)4%~(+)14%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.358-367
• /
• 2019

Objectives: This study aimed to review model algorithms and input parameters applied to some exposure models and to compare the simulated estimates using an exposure scenario from each model. Methods: A total of five exposure models which can estimate inhalation exposure were selected; the Korea Ministry of Environment(KMOE) exposure model, European Centre for Ecotoxicology and Toxicology of Chemicals Targeted Risk Assessment(ECETOC TRA), SprayExpo, and ConsExpo model. Algorithms and input parameters for exposure estimation were reviewed and the exposure scenario was used for comparing the modeled estimates. Results: Algorithms in each model commonly consist of the function combining physicochemical properties, use characteristics, user exposure factors, and environmental factors. The outputs including air concentration ($mg/m^3$) and inhaled dose(mg/kg/day) are estimated applying input parameters with the common factors to the algorithm. In particular, the input parameters needed to estimate are complicated among the models and models need more individual input parameters in addition to common factors. In case of CEM, it can be obtained more detailed exposure estimates separating user's breathing zone(near-field) and those at influencing zone(far-field) by two-box model. The modeled exposure estimates using the exposure scenario were similar between the models; they were ranged from 0.82 to $1.38mg/m^3$ for concentration and from 0.015 to 0.180 mg/kg/day for inhaled dose, respectively. Conclusions: Modeling technique can be used for a useful tool in the process of exposure assessment if the exposure data are scarce, but it is necessary to consider proper input parameters and exposure scenario which can affect the real exposure conditions.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.3-11
• /
• 2019

The recent earthquake of Pohang (M5.4) and the Gyeongju earthquake (M5.8) suggested the possibility of a strong earthquake in Korea and reminded us that the Korea is no longer an earthquake-safe zone. In the disaster recovery stage in a disaster like an earthquake, the investigation of the damage situation and the safety assessment of the building serve to provide important information for the initial action such as establishment of the recovery strategy and rescue of the survivor. However, the research that depends on manpower can not cope with the difficulty of processing a large number of doses in a short time, and the expertise of the manpower must be taken into consideration, which may result in delayed initial action. In this study, we propose an rapid safety evaluation technique of building using unmanned aerial vehicle which evaluates the performance and safety of buildings by integrating conventional safety inspection method with unmanned aerial vehicle technology and developed evaluation method of each evaluation factor. In order to verify this, the buildings damaged by the earthquake in Pohang were checked and compared using this system. The results are consistent with the results of the existing emergency earthquake risk assessment. As a result, the possibility of checking the emergency safety using the unmanned aerial vehicle for the damaged structures in case of a large-scale disaster such as an earthquake was confirmed.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1414-1422
• /
• 2017

Remote response technology has advanced to the extent that a robot system, if properly designed and deployed, may greatly help respond to beyond-design-basis accidents at nuclear power plants. Particularly in the aftermath of the Fukushima accident, there is increasing interest in developing disaster robots that can be deployed in lieu of a human operator to the field to perform mitigating actions in the harsh environment caused by extreme natural hazards. The nuclear robotics team of the Korea Atomic Energy Research Institute (KAERI) is also endeavoring to construct disaster robots and, first of all, is interested in finding out to what extent safety benefits can be achieved by such a disaster robotic system. This paper discusses a new approach based on the probabilistic risk assessment (PRA) technique, which can be used to quantify safety benefits associated with disaster robots, along with a case study for seismic-induced station blackout condition. The results indicate that to avoid core damage in this special case a robot system with reliability > 0.65 is needed because otherwise core damage is inevitable. Therefore, considerable efforts are needed to improve the reliability of disaster robots, because without assurance of high reliability, remote response techniques will not be practically used.

• BMB Reports
• /
• v.48 no.4
• /
• pp.209-216
• /
• 2015

Stress is now recognized as a universal premorbid factor associated with many risk factors of various chronic diseases. Acute stress may induce an individual's adaptive response to environmental demands. However, chronic, excessive stress causes cumulative negative impacts on health outcomes through "allostatic load". Thus, monitoring the quantified levels of long-term stress mediators would provide a timely opportunity for prevention or earlier intervention of stressrelated chronic illnesses. Although either acute or chronic stress could be quantified through measurement of changes in physiological parameters such as heart rate, blood pressure, and levels of various metabolic hormones, it is still elusive to interpret whether the changes in circulating levels of stress mediators such as cortisol can reflect the acute, chronic, or diurnal variations. Both serum and salivary cortisol levels reveal acute changes at a single point in time, but the overall long-term systemic cortisol exposure is difficult to evaluate due to circadian variations and its protein-binding capacity. Scalp hair has a fairy predictable growth rate of approximately 1 cm/month, and the most 1 cm segment approximates the last month's cortisol production as the mean value. The analysis of cortisol in hair is a highly promising technique for the retrospective assessment of chronic stress. [BMB Reports 2015; 48(4): 209-216]

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1784-1791
• /
• 2013

Electrical safety technique is a disaster prevention technology to protect the life and property of the people and it has high correlation with all electricity industry. According to the latest statistics, loss of human life and property damage due to electrical fire have increased from 2011. Therefore, technological development for guarantee safety of electrical facilities for customer will become more important. In this paper, we drew priority and weigh for the electrical safety technology using analytic hierarchy process and present progress direction of each technology through Risk-Return assessment. We expect development of the research and development policies of government about electrical safety technology in a higher state and think that policymakers and experts will be more interested in these fields based on this paper.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5489-5492
• /
• 2015

Background: Gradual loss of cytokeratin 13 (CK13) may be linked with the severity of dysplastic changes and transformation to malignancy. In this study we assessed the differential expression of CK13 in normal, hyperplastic, dysplastic and cancerous oral mucosa. Materials and Methods: A total of 93 oral biopsies were collected during the 2011-2014 period. The biopsies were characterized as normal (19), hyperplastic (21), severely dysplastic/carcinoma in situ (16) and invasive oral squamous cell carcinoma (OSCC) (37) after morphological assessment. Formalin fixed paraffin embedded sections were stained with a monoclonal antibody against CK13 using the Envision technique. Immunohistochemically stained slides were then analyzed for CK13 expression. Results: CK13 was consistently and diffusely expressed in all normal and hyperplastic tissue biopsies from oral mucosa. Severely dysplastic/carcinoma in situ biopsies showed complete loss in 50% of cases, while in the remaining 50% expression was very focal and weak. OSCC cases showed complete or near complete loss of CK13 in all cases. Few cases showed weak expression in keratin pearls only. Conclusions: This study validates the utility of CK13 IHC as a useful immunohistochemical marker in routine diagnostic practice to make distinction between non-neoplastic from dysplastic and neoplastic (malignant) oral lesions.

• Journal of Digital Contents Society
• /
• v.17 no.2
• /
• pp.97-103
• /
• 2016

This work introduces techniques experienced for the electrocardiogram(ECG) visual analysis, able to characterize the major parameters and events with clinical relevance for heart failure management and cardiovascular risk assessment. In particular, it includes approaches for ECG data visual processing such as the variable charts, graphs base on the complex MIT-BIH ECG database. Through the experienced this works of ECG database visualization, so many researcher more easily access the complex ECG database and can intuitionally understand the meanings via a variable ECG visualized data.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2009

Breast MRI is a cutting-edge technology in the diagnosis and intervention of breast abnormalities. Over the last decade, breast MRI has evolved from a research field to a clinical field. Radiologists should understand the indications, how to obtain adequate images, and how to interpret and report their findings. Breast MRI is now used in the differentiation of benign from malignant mass, preoperative staging of breast cancer patients, assessment of tumor response to neoadjuvant chemotherapy, and evaluation of women with breast implants. It can also be used as a supplemental screening modality for high-risk women. Qualified radiologists and adequate MRI technique are crucial for the success of these purposes. This review is focused on the indication, standardized use of lexicon and categorization of breast MRI.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.1-6
• /
• 2008

The safety management of the LNG industry which shows huge growth recently, become an essential element. So the necessity of development for the pre-existing LNG storage/transport facility has been shown up and the improvement of information technology (IT) of these days make it possible to synthesize several models for integrated LNG facilitiy safety management system. This system will contains risk analysis/assessment technology, explosion, leakage and diffusion model construction technology, real-time monitoring and fault diagnosis technology, and reliability progression technology of process information through data reconciliation. The final integrated safety management system will contribute the increase of LNG industry's safety and exportation of technique.