• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.392-398
• /
• 2009

This study identified risk factors of cross-contamination of foodborne pathogens and established a good agricultural practice (GAP) system for an agricultural products processing center (APC) for perilla leaves. All samples were collected before and after a standard work shift at the APC, while perilla leaves were also collected after each step in the APC. In addition, the workers and their surroundings were sampled by swabbing. The total plate count (TPC) and coliform count in the water samples increased significantly (p<0.05) to 3.36 and 1.73 log CFU/mL after work, respectively. However, no Escherichia coli and Listeria monocytogenes were detected. The bacterial populations of the workers and their surroundings did not differ significantly (p${\geq}$0.05) before and after work. However, Staphylococcus aureus (<1.66 log CFU) was detected at a high rate (13-50%) in the basket, packing table, gloves and cloth. Although perilla leaves passed through the washing steps, the TPC and coliform bacterial populations on the final products were higher (p${\geq}$0.05) than those of unwashed perilla leaves, which indicates that the washing system was not functioning properly. Accordingly, a GAP system with a better washing system should be employed at this facility.

• Journal of Radiation Protection and Research
• /
• v.40 no.2
• /
• pp.118-123
• /
• 2015

The frequency of diagnostic radiation examinations in medical institutions has recently increased to 220 million cases in 2011, and the annual exposure dose per capita was 1.4 mSv, 51% and 35% respectively, compared to those in 2007. The number of chest radiography was found to be 27.59% of them, the highest frequency of normal radiography. In this study, we developed a shielding device to minimize radiation exposure by shielding areas of the body which are unnecessary for image interpretation, during the chest radiography. And in order to verify its usefulness, we also measured the difference in entrance surface dose (ESD) and the absorbed dose, before and after using the device, by using an international standard pediatric (10 years) phantom and a glass dosimeter. In addition, we calculated the effective dose by using a Monte Carlo simulation-based program (PCXMC 2.0.1) and evaluated the reduction ratio indirectly by comparing lifetime attributable risk of cancer incidence (LAR). When using the protective device, the ESD decreased by 86.36% on average, nasal cavity $0.55{\mu}Sv$ (74.06%), thyroid $1.43{\mu}Sv$ (95.15%), oesophagus $6.35{\mu}Sv$ (78.42%) respectively, and the depth dose decreased by 72.30% on average, the cervical spine(upper spine) $1.23{\mu}Sv$ (89.73%), salivary gland $0.5{\mu}Sv$ (92.31%), oesophagus $3.85{\mu}Sv$ (59.39%), thyroid $2.02{\mu}Sv$ (73.53%), thoracic vertebrae(middle spine) $5.68{\mu}Sv$ (54.01%) respectively, so that we could verify the usefulness of the shielding mechanism. In addition, the effective dose decreased by 11.76% from $8.33{\mu}Sv$ to $7.35{\mu}Sv$ before and after wearing the device, and in LAR assessment, we found that thyroid cancer decreased to male 0.14 people (95.12%) and female 0.77 people (95.16%) per one million 10-year old children, and general cancers decreased to male 0.14 people (11.70%) and female 0.25 people (11.70%). Although diagnostic radiation examinations are necessary for healthcare such as the treatment of diseases, based on the ALARA concept, we should strive to optimize medical radiation by using this shielding device actively in the areas of the body unnecessary for the diagnosis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.205-212
• /
• 2012

This study was performed to investigate the prevalence of metabolic syndrome (MS) and assess nutrient intake levels for the purpose of improving MS risk factors. The participants in this study were 512 adults consisting of 271 men and 241 women aged 30 and over, who visited a public health center for a medical check up. The diagnosis of MS subjects was adapted from the NCEP-ATPIII guidelines and the WHO Asia-Pacific Area criteria for obesity. The MS group was defined as subjects displaying three or more risk factors, and the non MS group was defined as those displaying two or less risk factors. A dietary survey was conducted using the 24-hour recall method. The number of subjects displaying MS syndrome factors was 158 (30.9%), broken down into, 89 men and 69 women. Regarding risk factors in the MS group, the prevalence of waist circumference was 40.5%, hypertension 34.2%, hyperglycemia 31.0%, low HDL-cholesterol 24.7%, and hypertriglycemia 19.6%. BMI, sistolic blood pressure, blood glocose, blood triglyceride, and blood HCL-cholesterol of the MS group were significantly higher compared to the non MS group. Male subjects in the MS group reported high intakes of cereals, sugar, fruits, meat and poultry, oil and fats, and beverages and total food intake was significantly higher compared to the non MS group. Women in the MS group reported high intakes of meat and poultry, milk and dairy products, beverages, and seasonings, and total food intake was higher compared to the non MS group. Dietary diversity score (DDS) was 3.82~4.04, which was not significant among the groups. In men, dietary variety score (DVS) was 16.3 in the MS group and 19.4 in the non MS group, whereas in women, the DVS was 15.2 in the non MS group and 17.0 in the MS group. In GMVDF pattern, 11111 pattern was 30.7%, followed by 01111 for men and 11101 for women. Calorie, fat, and cholesterol intakes in men as well as, calorie, fat, and folate intakes in women in the MS group were higher compared to the non MS group. Intakes of protein, P, Fe, Na, vitamin $B_1$, vitamin $B_2$, niacin, vitamin E, and Zn were higher than the KDRIs. On the other hand, intakes of Ca, K, fiber, vitamin $B_2$, and vitamin C were below the KDRIs. Intakes of lipids, animal food, Na, and cholesterol in the MS group were higher compared to the non MS group, whereas intake of dietary fiber was lower. Our results indicate that continuous, systematic nutritional education program must implemented to reduce the risk factors associated with MS.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.107-117
• /
• 2008

In this study, surveys and interviews are used to evaluate technological competitiveness of each product with respect to that of foreign leading firms, for seven leading domestic construction products which have been determined to have competitive edge in offshore markets, Such evaluation provides a more in depth study than previously conducted research, and is meaningful in that corporate level, rather than industry level, perspective is projected. Major findings of such evaluations are the following. First, as expected, it has been evaluated that domestic technological competitiveness in desalination plant and power plant has reached the point where it can compete with foreign leading firms. Moreover, a noteworthy result of the evaluation is that development program sector, including urban development of satellite cities, has reached considerable level of competitiveness in offshore market. In the case of the development market, domestic firms have accumulated sufficient experience in domestic market and engineering technology is not a decisive factor as in plant sector, and these factors lead to such an evaluation. Second, in the cases of gas, oil refinery and petro-chemical plants, domestic products' technological competitiveness that can contest in offshore market is still centered around production and construction. On the other hand, there are still weaknesses in license technology and basic design capabilities, which constitute the "value added" area. Third, skyscrapers, a promising product in offshore construction market and a product group which domestic firms have much performance record and projects in progress both in domestic and offshore markets, are considered. While direct comparison between skyscrapers and plant sector is not feasible, with the exception of production and construction, overall domestic capability in this sector has been assessed to be the lowest amongst those products that were surveyed. Fourth, it has been indicated that competitiveness is relatively higher in common technology than in key technology. In project management capability, it has been assessed that there are weaknesses in procedure document area. Also, a characteristic is the point that low overall assessments have been given across all product groups for corporate and management areas, not technological areas. Especially, financing, contracting/claim, risk management and investment on research and development received low evaluations. Fifth, it has been assessed that overall corporate and governmental supports are weak. This result is especially evident for corporate management and support areas across all product groups surveyed.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.637-645
• /
• 2019

Due to the transformation to the intelligent information society, the rapid change of our life and environment is expected. The Ministry of Science and ICT (MSIT) and the National Research Council of Science and Technology (NST) introduced a five-year government supported research institution's planning and evaluation based on the mid-to long-term perspective. This study collects international benchmarking information including industry, academia, and research fields by collecting mid- and long-term strategy reports from public research institutes, surveys by experts from abroad universities and research institutes, and analyzing overseas market information reports. The British Geological Survey (BGS), the U.S. Geological Survey (USGS) and the japanese geological survey related institutes (AIST-GSJ) plans for three-dimensional national geological information, predictions of geological environmental disasters, and development of important metals and material in the low carbon economic transformation and in the era of the Fourth Industrial Revolution. The mid- and long-term program emphasizes basic and public research on geological information through abroad experts survey such as the IPGP-CNRS etc. The market analysis of the mining automation and digital map sectors has been able to derive the fields in which the role of public research institutes by the market is expected such as data collection on land and in the air, mobile or three-dimensional information production, smooth/fast/real-time maps, custom map design, mapping support to various platforms, geological environmental risk assessment and disaster management information and maps.

• Korean journal of communication and information
• /
• v.51
• /
• pp.117-135
• /
• 2010

The regulation of media concentration which is provided in the German Interstate Treaty on Broadcasting (RStV) is part of the rules forming the "positive broadcasting order" required by German Constitutional Law. This control ensures that the diversity of viewpoints can be articulated to the public. Broadcasting must operate independently from the state and from particular social groups if it is to be a genuine service to the public. One risk of economic competition in the media is a tendency towards the concentration of business enterprises. Moreover, economic competition is no guarantee for journalistic diversity. The aim of balanced diversity in the broadcasting sector can only be pursued by creating conditions under which different voices obtain the chance to be heard in an equitable manner. Within the framework of the meaning of section 26, it shall be assumed that there is a predominant impact on public opinion if the programs attributable to one company reach an annual audience share of 30 percent. The same shall apply if the company reaches an audience share of 25 percent and holds a dominant position in a related media-market or an overall assessment of its activities in television. The restriction of audience shares has limits such as that the audience shares of news programs and education and entertainment programs are pooled. Therefore, there is a vagueness about the productivity of different program branches.

• Women's Health Nursing
• /
• v.5 no.1
• /
• pp.133-145
• /
• 1999

The purposesof the study are to analyze the community nursing center in U.S.A and to develop the model of nursing care system based on nurse-midwifery clinic in community for women's health in Korea. 1. In America nursing center is defined as nurse-anchored system of primary care delivery or neighborhood health center. Nursing centers are identified the following four types: (1) community outreach centers, which are similar to traditional public health clinics: (2) institutional-based centers following the mission of a large institution, such as a hospital or university: (3) wellness/health promotion centers, which offer screening, education, counseling, triage, and health maintenance services: and (4) independent practice. Nursing centers are a concept of services provided by nurses in practice arrangements in a community. Nursing centers offer a variety of services, ranging from primary care provided by advanced practice nurses with medical acute management and nursing care to the more traditional education, health promotion, screening wellness and coordination services. Some services, such as the care provided by advanced practice nurses are reimbursed under various insurance plan in some instances and states, where as others, such as preventive and educational services, are not. Thus, lack of reimbursement has threatened the survival of some centers. Licensing of nursing centers varies by state and program and accreditation of nursing centers is also limited. 52% of centers are affiliated with another facility and 48% are freestanding centers. The number of registered nurse at the nursing centers ranges from just one to 115, with a mean of eight RNs peragency and a median of three. Nursing centers avail ability varies: 14% are open 24 hours, 27% have variable short hours, 23% are open 6-7 days per week, and 36% are open Monday- Friday. As the result of my visiting three health centers in Seattle and San Francisco, the women's primary care nurse practitioners focus on a systematic and comprehensive assessment of the health status of women and diagnosis and management of common physical and psychosocial health concerns of women in ambulatory settings. Therapeutic nursing strategies are directed toward self-care, risk reoduction, health surveillance, stress reduction, healthy nutrition, social support, healthy coping, psychological well-being, and pharmacological therapy. They function as primary care providers for the well ness and illness care of women from adolescence through the older adult years and pregnant families. 2. In Korea a nurse-midwife practices independently for pregnant women's health including childbearing family at her own clinic in community. Her services are reimbursed under national health insurance but they are not paid on a fee-for-service schedule covering items. Analyzing the nursing centers in America, I suggest that nurse-midwifery clinics offer primary care for women and home care for chronic ill patients. The health law and health insurance policy should be reovised in order to expand nurse-midwife's and home care nurse's roles at nurse-midwifery clinic.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.402-410
• /
• 2010

The objectives of this study were to evaluate the air quality surrounding an indoor swimming pool, to estimate the cancer risk based on the airborne exposure to trihalomethanes (THMs), and to examine the ventilation efficiency by Computational Fluid Dynamics (CFD). Chlorine and THMs were measured poolside, and in the staff room and reception area. The indoor swimming pool was modeled using the Airpak program, with ventilation drawings and actual survey data. Temperature, flow and mean age of the air were analyzed. Levels of chlorine poolside, and in the staff room, and reception area were $203\;{\mu}g/m^3$, $5\;{\mu}g/m^3$, and $10\;{\mu}g/m^3$, respectively. Chloroform was the dominant THM in all sampling sites and mean concentrations were $16.30\;{\mu}g/m^3$, $0.51\;{\mu}g/m^3$, and $0.06\;{\mu}g/m^3$ poolside, in the staff room and reception area, respectively. Bromodichloromethane and Dibromochloromethane levels were respectively estimated as $10.3\;{\mu}g/m^3$ and $1.7\;{\mu}g/m^3$ poolside, $1.3\;{\mu}g/m^3$ and $0.1\;{\mu}g/m^3$ in the staff room, and were not detected in the reception area. The cancer risks from inhalation exposure to THMs were estimated between $3.37{\times}10^{-7}$ and $1.84{\times}10^{-5}$. A short circulation phenomenon was observed from the supply air vents to the exhaust air vents located in the ceiling. A high temperature layer was formed within one meter of the ceiling, and a low temperature layer was formed under this layer due to the low velocity and high temperature of the supply air, and the improper locations of the supply air vents and exhaust air vents. The stagnation was evident at the above adult pool and the mean age of the air was 22 minutes. Disinfection by-products in the indoor swimming pool were present in higher concentrations than in the outdoor air. In order to increase the removal of pollutants, adjustment was required of the supply air volume and the supply/exhaust position.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.589-603
• /
• 2014

Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.374-379
• /
• 2019

This study developed predictive growth models of Salmonella enterica Serovar Typhimurium on lettuce washed with chlorine (100~300 ppm) and ultrasound (US, 37 kHz, 380 W) treatment and stored at different temperatures ($10{\sim}25^{\circ}C$) using a polynomial equation. The primary model of specific growth rate (SGR) and lag time (LT) showed a good fit ($R^2{\geq}0.92$) with a Gompertz equation. A secondary model was obtained using a quadratic polynomial equation. The appropriateness of the secondary SGR and LT model was verified by coefficient of determination ($R^2=0.98{\sim}0.99$ for internal validation, 0.97~0.98 for external validation), mean square error (MSE=-0.0071~0.0057 for internal validation, -0.0118~0.0176 for external validation), bias factor ($B_f=0.9918{\sim}1.0066$ for internal validation, 0.9865~1.0205 for external validation), and accuracy factor ($A_f=0.9935{\sim}1.0082$ for internal validation, 0.9799~1.0137 for external validation). The newly developed models for S. Typhimurium could be incorporated into a tertiary modeling program to predict the growth of S. Typhimurium as a function of combined chlorine and US during the storage. These new models may also be useful to predict potential S. Typhimurium growth on lettuce, which is important for food safety purposes during the overall supply chain of lettuce from farm to table. Finally, the models may offer reliable and useful information of growth kinetics for the quantification microbial risk assessment of S. Typhimurium on washed lettuce.