• Journal of the Korean Chemical Society
• /
• v.67 no.1
• /
• pp.19-27
• /
• 2023

During the past few decades, toxicity science is shifting from observative to predictive science. New approach methodologies (NAMs), including in chemico, in silico, in vitro approach, gain attention to reduce, refine, replace the whole animal toxicity testing. However, actual acceptances of NAMs in regulatory decision-making have been limited due to low confidence. To address the current constraints, Accelerating the Pace of Chemical Risk Assessment (APCRA) initiative conducted several case studies and presented the perspectives of next generation risk assessment (NGRA). In this review, we suggested a concept and perspectives of NGRA through analysis on APCRA case studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.90-98
• /
• 2021

Since 2017, the Occupational Safety and Health Act has been fully applied to school food services, and risk assessments have been implemented since 2019. The introduction was slow compared to other industries and was evaluated by non-professional nutritionists, so there was a limit to establishing the system. All schools under the Seoul Metropolitan Office of Education apply the KRAS every year in accordance with the OSH Act for school foodservice and a notice from the Ministry of Employment and Labor. A risk assessment is applied according to legal regulations. On the other hand, the effectiveness of risk assessment has been questioned because the frequency and intensity criteria of the risk are qualitative and subjective. Based on the accident statistics of catering workers, the frequency and intensity criteria of risk were presented quantitatively and objectively, and a risk assessment was conducted by applying a new calculation standard for some work during the catering service and compared with current risk assessment results. The risk was increased, and the improved effectiveness was confirmed by the specific suggestions for improvement. Thus, the pilot evaluation for the entire food service should be expanded, and the feasibility confirmed. The pilot evaluation should be applied to all schools to enhance the effectiveness and operability of the risk assessment.

• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.321-333
• /
• 2022

In this study, the concentration and distribution characteristics of BTEX (benzene toluene, ethylbenzene, and xylene) emitted from Daesan Petrochemical Industrial Complex were examined to determine their potential hazards to local residents. Residents living nearby the complex areas may be exposed to the chemicals through various media (air, water, and soil), especially by air. This study evaluated human health risks by inhalation using both deterministic and probabilistic risk assessment approaches. As a result of the deterministic risk assessment, the non-cancer risk was much lower than the regulation limit of hazard index (HI 1.0) for all the points. However, in case of cancer risk evaluation, it was found that the risk of excess cancer for benzene at point A located in the industrial complex was 2.28×10^-6, which slightly exceeded the standard regulatory limit of 1.0×10^-6. In addition, the probabilistic risk assessment revealed that the percentile exceeding the standard of 1.0×10^-6was found to be 45.3%. The sensitivity analysis showed that exposure time (ET) had the greatest impact on the results. Based on the risk assessment study, it implied that ethylbenzene, toluene, and xylene had little adverse effects on potential human exposure, but benzene often exceeded the cancer risk standard (1.0×10^-6). Further studies on extensive VOCs monitoring are needed to evaluate the potential risks of industrial complex areas.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.936-943
• /
• 2009

In this study, a risk assessment model based on the ETA (Event Tree Analysis) and FTA (Fault Tree Analysis) is developed according to the procedure of hazard analysis and risk assessment in order to estimate the risk quantitatively. The FTA technique is applied to estimate the branch probability (frequency) and the ETA technique is applied to estimate the consequence for each branch path on the ET (Event Tree). A risk assessment model is developed by the combination of those ETA and FTA. In addition, the reliability and the validity of the risk assessment model are verified by comparing the risk estimated through the developed model with the actual equivalent fatality.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.673-688
• /
• 2023

Purpose: Fires that occur during construction are infrequent, but cause great damage. Recently, with the growth of the logistics and distribution industry, the number of construction sites for new logistics warehouses is increasing, so it was selected as a research subject and research was conducted to reduce accidents at construction sites through the development of a fire risk assessment tool to quantitatively approach fire prevention. Method: A comprehensive fire risk assessment tool was accumulated by classifying the work in progress, classifying combustibles and ignition sources by grade, excluding air (oxygen), which is difficult to control, and additionally substituting evacuation safety. Result: Using the developed and proposed fire risk evaluation tool, excavation work with low fire risk, facility construction with medium fire risk, and finishing work with high fire risk were sampled to derive the result (CGI). Conclusion: In this study, it was possible to establish specific preventive measures and evaluate evacuation safety by controlling physical conditions (combustibles) and energy conditions (ignition sources) according to the risk assessment by developing a tool that can evaluate the risk of 14fire occurrence at construction sites. It is expected that in the future, through the application of the fire risk evaluation tool at construction sites, it will be provided as a criterion for establishing a process plan that can reduce risk and evaluating the adaptability of firefighting equipment.14

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.520-531
• /
• 2022

Purpose: Based on the risk evaluation of hydrogen fueling stations, this study aims to find a plan to strengthen management safety by examining profitability and management risk, which are major concerns of employers. Method: The risk evaluation was divided into 'acceptable risk' and 'allowable risk' over time from the stage of installation of hydrogen fueling stations, and compared and analyzed with the results of existing studies. Result: Existing studies have been appropriately applied to the risk assessment performed at the stage of installing hydrogen fueling stations. However, possible risks could be found at the operational stage. In other words, it was derived that an evaluation of management risk was also necessary. And through this, it was confirmed that the safety of hydrogen fueling stations was strengthened. Conclusion: The risk assessment that precedes the stage of installing hydrogen fueling stations is appropriate because significant results have been derived from the 'acceptable risk' assessment. However, the operator needs to evaluate the risks that may occur at the operating stage, that is, the 'allowable risks' and prepare countermeasures. Therefore, it is proposed to add management risk assessment items to build and operate safer hydrogen fueling stations.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.63-67
• /
• 2008

This study focuses on assessing the security ri sk or the terrorism in chemical process industries. This research modifies conventional method for assessing the terrorism risk. The risk assessment method is developed and it is implemented as software to analyze the possibility of terrorism and sabotage. This program includes five steps; asset characterization, threat assessment, vulnerability analysis, risk assessment and new countermeasures. It is a systematic, risk based approach in which risk is a function of the severity of consequences of an undesired event, the likelihood of adversary attack, and the likelihood of adversary success in causing the undesired event. The reliability of the program is verified using a dock zone case. The case dock zone includes a storage farm, a manufacturing plant, an electrical supply utility, a hydrotreater unit, many containers, and administration buildings. This study represents chemical terrorism response technology, the prevention plan, and new countermeasure to mitigate by using risk assessment methods in the chemical industry and public sector. This study suggests an effective approach to the chemical terrorism response management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.670-678
• /
• 2018

In coastal waters where the traffic volume of the ship is high, there is a high possibility of a collision accident because complicated encounter situations frequently occurs between ships. To reduce the collision accidents at sea, a quantitative collision risk assessment is required in addition to the navigator's compliance with COLREG. In this study, a new collision risk assessment system was developed to evaluate the collision risk on ship's planned sailing routes. The appropriate collision risk assessment method was proposed on the basis of reviewing existing collision risk assessment models. The system was developed using MATLAB and it consists of three parts: Map, Bumper and Assessment. The developed system was applied to the test sea area with simple computational conditions for testing and to actual sea areas with real computational conditions for validation. The results show the length of own ship, ship's sailing time and sailing routes affect collision risks. The developed system is expected to be helpful for navigators to choose the optimum safe route before sailing.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.21-40
• /
• 2003

A traffic accident analysis method was developed and tested based on the highway alignment risk indices using geographic information systems(GIS). Impacts of the highway alignment on traffic accidents have been identified by examining accidents occurred on different alignment conditions and by investigating traffic accident risk indices(TARI). Evaluative criteria are suggested using geometric design elements as an independent variable. Traffic accident rates were forecasted more realistically and objectively by considering the interaction between highway alignment factors and the design consistency. And traffic accident risk indices and risk ratings were suggested based on model estimation results and accident data. Finally, forecasting traffic accident rates, evaluating the level of risk and then visualizing information graphically were combined into one system called risk assessment system by means of GIS. This risk assessment system is expected to play a major role in designing four-lane highways and developing remedies for highway sections susceptible to traffic accidents.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.395-404
• /
• 2022

Purpose: Small-scale construction sites have insufficient systematic safety management activities, and due to the characteristics of the construction site, the production structure is complex due to external environmental factors, and the risk of construction equipment is very high. We would like to propose a checklist method among practical risk assessment techniques that can derive risk factors for disaster prevention at small construction sites and reduce disasters. Method: Risk factors were derived by analyzing literature research and disaster cases, and detailed work for a checklist of risk assessment suitable for small-scale construction sites was classified based on risk factor items. Result: Hazard factors were divided into 6 major categories, and 29 detailed types of work were classified based on actual work types, and 80 detailed works were classified accordingly. Conclusion: By arranging risk factors suitable for small-scale construction sites according to the classification system, the lack of expertise in the construction site can be supplemented, and risk factors can be derived more easily and disaster reduction can be expected through establishment of safety measures.