• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.201-205
• /
• 2021

In this paper present Low Drop-Out (LDO) regulator that improved load transient characteristics due to the push-pull detection structure. The response characteristic of the voltage delta value is improved due to the proposed push-pull sensing circuit structure between the input terminal of the LDO regulator pass transistor and the output terminal of the internal error amplifier. Voltage value has improved load transient characteristics than conventional LDO regulator. Compared to the conventional LDO regulator, it has an improved response speed of approximately 244 ns at rising time and approximately 90 ns at falling time. The proposed circuit was simulated by the samsung 0.13um process using Cadence's Specter and Virtuoso simulator.

• Journal of Adhesion and Interface
• /
• v.17 no.1
• /
• pp.21-28
• /
• 2016

Foam-type biodegradable polyurethane adhesives were developed as a non-lethal weapon against illegal fishing boats. The adhesives were prepared from a hardener of polymeric methylene diphenyl diisocyanate (MDI) and a base composed of polyester and/or polyether polyols. In order to accelerate biodegradability, starch, dextrin, and amylase were added into the base, and which present about 34% degradability within 4 weeks confirmed by OECD 301C method. For proper mixing and corresponding prompt foam reaction, viscosities of hardener and base compositions were investigated in the temperature ranges from 0 to $50^{\circ}C$. For fast completion of the foam forming and corresponding adhesion, rising time was recorded in the same temperature range, and the rising time of the adhesive was varied within around 1 minute. T-peel adhesion tests with cotton fabrics were performed which showed 20.78 N/cm and 11.95 N/cm as the maximum and the average values, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.506-510
• /
• 2005

As FPD technology is getting improved, there are a lot of issues on signal processing and analysis, and its relative importance has been increasing day by day. In particular, response time sad in the evaluation item of FPD has been measured by oscilloscope. In this paper, we propose an effective measurement method of response time in FPD. The proposed method is to calculate the rising/ falling time by using statistical techniques of histogram and analyzing an energy distribution. Ultimately, the method has proved the utility and reliability by comparison of oscilloscope

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1275-1278
• /
• 2012

Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of electroconductive ceramic composites. Temperature rising time of sheath heater is 1.1 times faster than SiC ceramic heater. Heating insulation of SiC ceramic heater is 2.7 times larger than sheath heater. If SiC ceramic heater is one body type of a product application, contact resistance will decrease. I think that temperature initial rising time is faster than now. The more SiC ceramic heater is used for a long time, the more economic benefit is larger in the view point of heat insulation.

• Journal of the Korean Society of Visualization
• /
• v.2 no.1
• /
• pp.39-45
• /
• 2004

A time-resolved two-phase PIV system using a single camera has been developed, which introduces a method of image separation into respective phase images, and is applied to freely rising single bubble. Gas bubble, tracer particle and background have different gray intensity ranges on the same image frame when reflection and dispersion in the phase interface are intrinsically eliminated by optical filters and fluorescent particles. Further, the signals of the two phases do not interfere with each other. Gas phase velocities are obtained from the separated bubble image by applying the two-frame PTV. On the other hand, liquid phase velocities are obtained from the tracer particle image by applying the cross-correlation algorithm. As a result, the bubble rises rectilinearly just after it is released from an injector and then has a zigzag motion in the far field. From the trajectory of the bubble, it is found that the period of the zigzag motion is closely related to the vortex shedding although the wavelength of it varies along its movement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1631-1634
• /
• 2009

Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites. Temperature rising time of sheath heater is 1.1 times faster than SiC ceramic heater. Heating insulation of SiC ceramic heater is 2.7 times larger than sheath heater. If SiC ceramic heater is one body type of a product application, contact resistance will decrease. I think that temperature initial rising time is faster than now. The more SiC ceramic heater is used for a long time, the more economic benefit is larger in the view point of heat insulation.

• International Commerce and Information Review
• /
• v.8 no.4
• /
• pp.45-69
• /
• 2006

First, the trade competitiveness of the textile industries in South Korea has been weakening, whereas, the counterpart in China has been growing as the main export industries. Second, the trade competitiveness of the mechanics industries in South Korea has been increasing and appearing as the new promising strategic export industries. And, the counterpart in China also shows that it has been rising, while the country’s level of the imports specialization index has been weakening. Third, the trade competitiveness of the transportation industries in South Korea has been rising as the export-oriented and at the same time, privileged industries. And, China has also been rising as South Korea has been in the case, whereas, imports specialization index has been weakening. Fourth, the trade competitiveness of the electrical and electronic industries in South Korea has relatively been at the very high level, giving rise to the core export-privileged industries in the South Korea. And, China has been emerging as the new strategic export industries, as its industry structure has been shifted from the import- specialization and export-specialization industries. Fifth, it is indicated that the trade in the both South Korean and Chinese industries of fable materials, mechanics goods for computer & office, and goods for electric mechanics has been going favorable and brisk.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.3
• /
• pp.382-388
• /
• 2011

Traditional Korean Medicine and Taoism think of the importance of a life nurturing for one's health and longevity. However, for a life nurturing, Traditional Korean Medicine aims at a person living up to one's natural life span. Taoism lays importance on ascending up to the sky to be a Taoist hermit with supernatural powers. Therefore, they both differ in the pursuit of their goals and their methods in doing respectively. In this study we have shown similarities and differences in the meaning and ways to practice su-seung-hwa-gang (body water rising and heat falling) which Traditional Korean Medicine and Taoism regard highly as a means of the practice of a life nurturing. Su-seung-hwa-gang is a concept that both Traditional Korean Medicine and Taoism set a high value on and at the same time it is a concrete method of a life nurturing demonstrating the possibility of 'non-disease treatment' through the active efforts of Traditional Korean Medicine.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2173-2178
• /
• 2007

Dynamics of plasma sheath was analyzed using simple ion fluid model with poison equation. Incident ion current, energy, potential distribution and space charge density profile were calculated as a function of time. The effects of initial floating sheath on the evolution of biased sheath were compared with ideal matrix sheath. The effects of finite rising time of pulse bias voltage on the ion current and energy was studied. The influence of surface charging on the evolution of sheath was also investigated

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.315-322
• /
• 2017

The purpose of this study is to investigate experimentally the construction performances and economical evaluation of the self-compacting concrete in actual site work after selecting the optimum mix proportions according to cementitious materials. Slag cement type of 46.5% slag powder and belite cement of 51.4% $C_2S$ content, lime stone powder as binders are selected for site experiment including water cement ratio. Also, test items for optimum mix proportion are as followings ; (1) Slump flow, 500 mm reaching time, V-type flowing time and U-box height (2) Setting time, bleeding, shortening depth and adiabatic temperature rising (3) Mixing time in plant (4) Concrete quantity and cost, quality control in actual concrete work. As test results, (4) Optimum water-cement ratio ; Slag cement type 41.0% and belite cement 51.0% (2) Setting time and bleeding finishing time of slag cement are faster, bleeding content of slag cement is higher, shortening depth and adiabatic temperature rising of belite cement type are lower (3) Optimum mixing time in batcher plant is 75 seconds and concrete productive capacity is about $100{\sim}110m^3/hr$. (4) Belite cement type is lower than slag cement type in material cost 14.0%, and concrete quantity in actual concreting work save 3.3% in case of belite cement type. Therefore, self-compacting concrete of belite cement type is definitely superior to that of slag cement type in various test items without compressive strength development.