• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.344-352
• /
• 2019

초심해역 자원개발용 라이저와 계류된 부유체와의 연성해석을 수행한다. 일반적으로 라이저의 안전성은 부유체와의 연성해석 없이 최대 offset을 고려한 해석을 통해 보수적으로 평가되는데, 본 연구에서는 계류된 부유체의 연성 운동해석을 고려하여 라이저의 안전성을 분석한다. 라이저는 초심해역에 적용되는 SLWR이 고려되며, 부유체는 FPSO가 적용된다. 연성을 고려하는 방법과 고려하지 않는 방법론에 대하여 제시한다. 계류선이 모두 안전한 정상상태(Intact) 조건과 사고(damaged) 조건을 고려하여, 각 조건에서 파랑 입사각도에 따라 연성해석 효과를 분석한다. 하중 조건에 따라 계류선의 장력, 부유체의 운동 및 라이저의 거동 등을 분석한다.

• Structural Monitoring and Maintenance
• /
• 제6권4호
• /
• pp.365-387
• /
• 2019

This study aims to provide useful information on the fatigue assessment of a top-tensioned riser (TTR) subjected to vortex-induced vibration (VIV) by performing parametric study. The effects of principal design parameters, i.e., riser diameter, wall thickness, water depth (related to riser length), top tension, current velocity, and shear rate (or shear profile of current) are investigated. To prepare the base model of TTR for parametric studies, three (3) riser modelling techniques in the OrcaFlex were investigated and validated against a reference model by Knardahl (2012). The selected riser model was used to perform parametric studies to investigate the effects of design parameters on the VIV fatigue damage of TTR. From the obtained comparison results of VIV analysis, it was demonstrated that a model with a single line model ending at the lower flex joint (LFJ) and pinned connection with finite rotation stiffness to simulate the LFJ properties at the bottom end of the line model produced acceptable prediction. Moreover, it was suitable for VIV analysis purposes. Findings from parametric studies showed that VIV fatigue damage increased with increasing current velocity, riser outer diameter and water depth, and decreased with increasing shear rate and top tension of riser. With regard to the effects of wall thickness, it was not significant to VIV fatigue damage of TTR. The detailed outcomes were documented with parametric study results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.650-658
• /
• 2021

Flexible risers are usually used as conveying systems to bring ocean resources from sea bed up to onshore. Under ocean environments, risers need to bear complex loads and it is crucial to comprehensively examine riser's configurations and to analyze structural dynamic performances under excitation of bottom vehicle motions, to guarantee structural safe operation and required service lives. In this study, considering a saddle-shaped riser, the influences of some important design parameters, including installation position of buoyancy modules, buoyancy ratio and motion of mining vehicle, on riser's configuration and response are carefully examined. Through our FEM simulations, the spatial distributions of structural tensions and curvatures along of riser length, under different configurations, are compared. Then, the impacts of mining vehicle motion on riser dynamic response are discussed, and structural tolerance performance is assessed. The results show that modules installation position and buoyancy ratio have significant impacts on riser configurations. And, an appropriate riser configuration is obtained through comprehensive analysis on the modules positions and buoyancy ratios. Under this proposed configuration, the structural tension and curvature could moderately change with buoyancy modules and bottom-end conditions, in other words, the proposed saddle-shaped riser has a good tolerance performance to various load excitations.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.265-287
• /
• 2016

The change of the global performance of a turret-moored FPSO (Floating Production Storage Offloading) with DP (Dynamic Positioning) control is simulated, analyzed, and compared for two different internal turret location cases; bow and midship. Both collinear and non-collinear 100-yr GOM (Gulf of Mexico) storm environments and three cases (mooring-only, with DP position control, with DP position+heading control) are considered. The horizontal trajectory, 6DOF (degree of freedom) motions, fairlead mooring and riser tension, and fuel consumptions are compared. The PID (Proportional-Integral-Derivative) controller based on LQR (linear quadratic regulator) theory and the thrust-allocation algorithm which is based on the penalty optimization theory are implemented in the fully-coupled time-domain hull-mooring-riser-DP simulation program. Both in collinear and non-collinear 100-yr WWC (wind-wave-current) environments, the advantage of mid-ship turret is demonstrated by the significant reduction in heave at the turret location due to the minimal coupling with pitch mode, which is beneficial to mooring and riser design. However, in the non-collinear WWC environment, the mid-turret case exhibits unfavorable weathervaning characteristics, which can be reduced by employing DP position and heading controls as demonstrated in the present case studies. The present study also reveals the plausible cause of the failure of mid-turret Gryphon Alpha FPSO in milder environment than its survival condition.

• 대한조선학회지
• /
• 제26권2호
• /
• pp.64-72
• /
• 1989

본 논문에서는 전단류를 받는 marine riser의 와류유기진동 예측모델을 제시하였다. 여기서는 marine riser를 인장력이 길이에 따라 변하는 보로 모델링하고, 섭동법으로 구해진 Green's function과 random vibration 이론에 의하여 예측모델을 구성하였다. 여기서 제시된 예측모델을 실제의 riser에 대하여 적용해 본 결과, riser는 전단류 내에서 유 무한 경계의 거동 특징을 동시에 갖는 중간적인 거동을 하며, riser의 길이에 따라 진동응답크기의 분포가 흐름의 유속분포와 비슷한 형태를 갖고 있는 것으로 나타났다. 또한, marine riser를 길이에 따라 변하는 인장력을 받는 보로 모델링한 경우와, 그것을 평균한 균일한 인장력을 받는 보로 모델링한 경우에 대하여 해석한 진동응답을 비교한 결과, 균일인장력을 받는 보로 모델링한 경우가 riser의 수면근처에서 실제보다 큰 예측치를 주고 있는 것으로 나타났다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.223-235
• /
• 2021

The Vortex-Induced Vibration (VIV) test system on deepwater riser based on Bare Fiber Bragg Grating (BFBG) sensor technology was designed. Meanwhile, a riser VIV response numerical model was established based on the work-energy principle. The results show that the first-order vibration frequency dominates the vibration of the riser, and as the velocity increases, the dominant frequency of the riser gradually increases under the effect of different top tensions. At the same velocity, as the top tension increases step by step, the dominant frequency and fatigue damage at the same position along the axial length of the riser both gradually decreases. The model test and numerical simulation show a relatively consistent change, maintaining a high degree of agreement. The process control system based on BFBG of model test has excellent performance, and FBG sensors have great advantages in VIV test of a vertical riser in water.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.258-265
• /
• 2016

A flexible riser consists of several layers which have different materials, shapes and functions. The layers designed properly can take the design load safely, and each property of layer provides a complexity of flexible riser. Such complexity/unit-property is an input for global analysis of flexible riser. There are several approaches to calculate the complexity of flexible riser, those are experimental, numerical and theoretical methods. This paper provides a complexity from numerical and theoretical analysis for 2.5 inch flexible riser of which details and the experimental data are already produced under tension, external pressure, and bending moment. In addition, comparison of stiffness and stress are also provided. Especially, analysis of stress could lead to researches on ultimate strength or fatigue strength of flexible risers.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.15-22
• /
• 2004

Static and dynamic analyses of a very flexible and light riser, for upwelling the deep ocean water, is performed. In this numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid non-linearity and bending stiffness are considered and solved, using the Newton-Raphson iteration. Maintaining the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight is attached at the end point of the riser in order to maintain its intake depth. It is designed under the strong surface current and the configuration of the rise is predicted. In the dynamic analysis, the tension variation at the top point of the riser is presented. T e results of this study can contribute to the design of the development system in floating type for upwelling deep ocean water.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.83-89
• /
• 2013

A numerical scheme based on a mode superposition method is presented for the dynamic response analysis of a top-tensioned riser (TTR) under sheared current loads. The natural frequencies and mode shapes of the TTR have been calculated analytically for a beam with a slowly varying tension and pinned-pinned boundary conditions at the top and bottom ends. The lift coefficients and corresponding amplitudes used to estimate the vortex-induced modal force and damping for each mode were predicted via iterative calculations based on the input and output power balancing concept. Here, the power-in regions were controlled by the normal distribution function, for which the center was coincident with the lock -in location by local vortex-shedding, and the range was defined by the constant standard deviation for the reduced velocity by the local current speed. Finally, dynamic responses such as root-mean-squared displacement and stress were calculated using the mode superposition technique. In order to verify the presented scheme, a numerical calculation was performed for a TTR under an arbitrary linearly sheared current and linearly varying tension. A comparison with the results of the existing software showed that the presented scheme could give reliable and feasible solutions. Case studies were performed to investigate the effects of various current loads and tensions.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.