• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2021

In this study, the design methodology of LCL filter for grid-connected three-phase inverter was studied. First, the advantages and disadvantages of applying typical filter structures as a filter for grid connection of a three-phase inverter were analyzed. Next, filter design methodologies for grid connection of a three-phase inverter were analyzed, and an effective filter design methodology was determined to satisfy the harmonic requirements in grid connection. In order to verify the effectiveness of the design methodology, EMTP models such as a three-phase inverter, a three-phase LCL filter, and a performance evaluation system to evaluate the performance of the designed filter were developed using EMTP-RV. Next, an LCL filter was designed for an application example of a three-phase inverter, and the waveforms of the output voltage and outage current of the three-phase inverter were checked through EMTP-RV simulation work. In particular, the validity of the design methodology was verified by confirming that the magnitude of the current ripple was reduced to a limited magnitude through waveform analysis of the output current.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.131-134
• /
• 2005

Recently, RF systems have rapidly grown with the extension of the mobile communication service The mobile service companies are providing the satellite broadcasting and common usage are expected. Coinciding with current trend, the development of improved satellite DMB (Digital Multimedia Broadcasting) tuner is required. To improve the receiving sensitivity under the poor communication circumstance, It is necessary to design the LNA (Low Noise Amplifier) with outstanding low noise characteristic and the BPF (Bandpass Filter) to transmit only desired signal without distortion and loss. Besides high reliability, the miniaturization and lightweight are required for design of mobile terminals. In this study, we designed and fabricated DMB SIR-type BPF which operates at 2642 MHz and is embedded in the substrate using LTCC. As a result, we obtained the passband insertion loss of 2.4 dB and the passband ripple of 0.08 dB. So this DMB SIR-type BPF is applicable to RF module of a satellite DMB tuner.

• Journal of Information Technology Services
• /
• v.15 no.3
• /
• pp.33-50
• /
• 2016

In a dynamic IT environment, employees often utilize external IT resources to work more efficiently and flexibly. However, the use of external IT resources beyond its control may cause difficulties in the company. This is known as "Shadow IT." In spite of efficiency gains or cost savings, Shadow IT presents problems for companies such as the outflow of enterprise data. To address these problems, appropriate measures are required to maintain a balance between flexibility and control. Therefore, in this study, we developed a new information security management system called AIIMS (Advanced IT service & Information security Management System) and the Shadow IT Evaluation Model. The proposed model reflects a Shadow IT's attributes such as innovativeness, effectiveness, and ripple effect. AIIMS consists of five fields: current analysis; Shadow IT management plans; management process; education and training; and internal audit. There are additional management items and sub-items within these five fields. Using AIIMS, we expect to not only mitigate the potential risks of Shadow IT but also create successful business outcomes. Now is the time to draw to the Light in the Shadow IT.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.231-257
• /
• 2016

Several efforts to replace the use of existing fossil energy resources have already been made around the world. As a result, a new industry of renewable energy has been created, and efficient energy distribution and storage has been promoted intensively. Among the newly explored renewable energy sources, the most widely used one is solar energy generation, which has a high market potential. An energy storage system (ESS) is a system as required. In this paper, the design and implementation of an ESS for the efficient use of power in stand-alone street lights is presented. In current ESS applied to stand-alone street lights, either 12V~24V DC (from solar power) or 110V~220V AC (from commercial power) is used to recharge power in systems with lithium batteries. In this study, an ESS that can support both solar power and commercial power was designed and implemented; it can also perform emergency recharge of portable devices from solar powered street lights. This system can maximize the scalability of ESSes using lithium batteries with efficient energy conversion, with the advantage of being an eco-friendly technology. In a ripple effect, it can also be applied to smart grids, electric vehicles, and new, renewable storage markets where energy storage technology is required.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1278-1284
• /
• 2008

Electric propulsion motors are operated from a variable frequency drive, which supplies power to motors at a frequency appropriate to the desired speed. The objective of this study was to evaluate power converters for shipboard applications and to recommend converters that meet lower harmonic distortion levels and torque ripples. Two systems were studied in detail : Cyclo-converters and PWM-converters. Cyclo-converters are the obvious choice where size, weight and efficiency are the most critical issues. However they have a disadvantage in power factor and they produce severe torque ripples in the motor which makes them unacceptable without special systems. PWM-converters produces better motor current waveform and eliminates common mode voltage issues at the motor, but suffers a multiple stages of power conversion and the isolating transformer. Results of this case study show that PWM-converters are more advanced and efficient drives for induction motor of electric propulsion ship.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.317-322
• /
• 2003

A novel three-level DC/DC converter (TLC)for high power applications operating from high input voltage Is proposed. Its switch voltage stress can be ensured to be only one-half of the Input voltage. Nevertheless, since all input voltage is applied to the transformer primary side, it has good turns ratio. The driving method of each module is same as those of the conventional phase-shifted ZVS full bridge PWM converter (PSFB) and the zero-voltage-switching (ZVS) of the leading leg are achieved exactly in the same manner as that of the PSFB. Moreover, its three-level operation can considerably reduce the current ripple through the output inductor and it has no problems of the DC-link voltage unbalance. Therefore, it features a low voltage stress, high efficiency, low EMI, high power density, and small sized filter. To confirm the operation, validity, and features of the proposed circuit, experimental results from a 200W, 600V/DC-48V/DC prototype are presented.

• Archives of design research
• /
• v.16 no.3
• /
• pp.41-50
• /
• 2003

Cartoons as one of visual art forms seek the essence of an, which is creation. They also have great ripple effects as popular art and culture. Cartoons as a communication tool by means of visual image give a better understanding thanks to its function of combining messages and animation. That is why cartoons have a unique place in journalism as the function of delivering facts through messages and pictures. MAD, a cartoon magazine for current issues, reveals and harshly criticize social contradictions, thereby eliciting readers'positive response. To effectively utilize cartoons, an approach in phases should be taken. First, different genres should be compared and embraced. And then, when the genre of cartoons enters the stage of expansion or growth, cartoons will become a new visual information medium from the perspective of communication in society and from the perspective of journalism, and literature, design and art in academia.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.14-19
• /
• 2010

In this paper, using interleaved power factor correction how to improve the inverter efficiency studied. Interleaved method can reduce the conduction losses and the inductor energy. Generally, critical conduction mode (CRM) boost PFC converter used low power level because of the high peak currents. if you use the interleaved mode, CRM PFC can be used medium or high power application. interleaved CRM PFC can reduce current ripple for higher system reliability and size of buck capacitor and EMI filter size. Interleaved CRM PFC that is installed in front of inverter can maintain the constant voltage regardless of the input voltage.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.524-525
• /
• 2008

본 논문에서는 각각의 스위치 시비율(Duty ratio)의 변화를 이용한 기존의 풀-브릿지 방식과 두 쌍의 스위치 신호 위상 변화를 이용한 위상천이 풀-브리지(Phase-shift Full-bridge) 방식의 차이점을 서술하였다. 위상천이 컨버터의 안정성을 연구하기 위하여, 출력 전류의 맥동(ripple)을 작게 하는 배전류(Current Doubler) 정류회로와 효율을 높이기 위한 동기 정류기(Synchronous Rectifier)를 포함한 평균화 된 스위치 모델을 제안한다. 이 모델을 이용하여 PSPICE 시뮬레이션을 통해 안정성을 고찰하였으며 1.2kW급 170-14V DC-DC 컨버터의 시작품을 제작 후 시뮬레이션 결과와 시작품 결과를 비교하였다. 시뮬레이션의 경우 위상여유는 $58^{\circ}$ 시작품의 위상여유는 $68^{\circ}$로 나타났으며 교차주파수는 12kHz로 동일하게 나오는 것을 확인하였다. 따라서 제안한 시뮬레이션 모델을 이용하여 실제 회로의 안정성을 예측할 수 있으며 이를 실제 회로 제작에 활용 할 수 있다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.213-218
• /
• 2017

The DC electrolytic capacitor for DC-link of power converter is widely used in various power electronic circuits and system application. Its functions include, DC Bus voltage stabilization, conduction of ripple current due to switching events, voltage smoothing, etc. Unfortunately, DC electrolytic capacitors are some of the weakest components in power electronics converters. Many papers have proposed different algorithms or diagnosis method to determinate the ESR and tan ${\delta}$ capacitance C for fault alarm system of the electrolytic capacitor. However, both ESR vary with frequency and temperature. Accurate knowledge of both parameters at the capacitors operating conditions is essential to achieve the best reference data of fault alarm. According to parameter analysis, the capacitance increases with temperature and the initial ESR decreases. Higher frequencies make the reference ESR with the initial ESRo value to decrease. Analysis results show that the proposed DC Bus electrolytic capacitor reference ESR model setting technique can be applied to advanced reference signal of capacitor diagnosis systems successfully.