• 전기학회논문지
• /
• 제59권11호
• /
• pp.1990-1995
• /
• 2010

Main reasons for causing vibration in a permanent magnet synchronous motor (PMSM) are torque ripple and radial force harmonics, and hence, both of them are undesirable in high-precision machine tools and accurate motion-control actuators. Recent research on radial force is the prediction of major vibration frequencies and modes in terms of motor design such as different winding types and a fractional slot number per pole in the stator. Also, proper phase current has been investigated for minimizing radial force harmonics. During the previous studies, all the motors are assumed to be ideally built up in terms of mechanical dimensions, but it is impossible due to dimensional variation within or outside tolerance in production. Therefore, in this paper, the effect of several key factors on radial force is examined and compared regarding manufacturing imperfection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.156-160
• /
• 2009

This paper presents the interleaved active-clamping ZVS(Zero Voltage Switching) forward converter, which is mainly composed of two active-clamping forward converters. Only two switches are required, and each one is the auxiliary switch for the other. The circuit complexity and cost are thus reduced. The leakage inductance of the transformer or an additional resonant inductance is employed to achieve ZVS during the dead times. The duty cycles are not limited to be equal and within 50%. The complementary switching and the resulted interleaved output inductor currents diminish the current ripple in output capacitors. Accordingly, the smaller output chokes and capacitors lower the converter volume and increase the power density. Detailed analysis and design of this new interleaved active-clamping forward converter are described.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.594-599
• /
• 2001

A study of single-stage PFC electronic ballast with constant do-link voltage is presented in this paper. The proposed ballast is combined by two interleaved boost cells and a conventional half bridge dc/ac inverter, By exploiting the interleaving technique, the Input ripple current of the electronic ballast is reduced. Theoretical analysis and experimental results for two 45(W) fluorescent lamps are presented.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1371-1376
• /
• 2014

In this paper, 4-phase switched reluctance motor(SRM) with 8-stator and 6-rotor pole structure is proposed for a high speed fan with a low voltage. The air blower has unidirectional rotation characteristics and requires a low torque ripple and noise as well as high efficiency. To achieve the requirements, voltage and current according to loading condition of limited specification is considered. Design process is to select the bore diameter, pole arc, york of stator and rotor to get a high torque and efficiency. To verify the validity of the proposed structure, finite element method(FEM) is employed to get the performances. And the converter for the proposed SRM is employed a 1.5q power converter for cost effectiveness. Prototype SRM is manufactured and tested, and the test results show this design is within the specification and good for the air blower applications.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.496-499
• /
• 2006

The solar cells should be operated at the maximum power point because its output characteristics are greatly fluctuate on the variations of insolation, temperature and loads. To obtain maximum power from solar cell, photovoltaic system cell power system usually requires maximum power point tracking controller. This paper propose Maximum power point tracking method using zero slope of differential value of maximum power. The power compare method traces to maximum power point rapidly but oscillate on the maximum power point largely, when quantity insolation variation is big. The power compare method is traces to maximum power point slowly but oscillate maximum point on the maximum power point smally, when quantity insolation variation is small. To solve two problem of the power compare method, designed zero slope of differential value of maximum power.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.566-574
• /
• 2013

In this paper, direct power control system for three-phase PFC AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the reduced-order virtual flux observer using the actual currents and the command control voltage. Moreover, source voltage sensors are replaced by a estimated flux. DC output voltage has been compensated by DC output ripple voltage estimation algorithm. The active and reactive powers estimation are performed based on the estimated flux and Phase angle. The proposed algorithm is verified through simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.451-452
• /
• 2014

본 논문에서는 단상 계통연계형 컨버터의 전원 위상각을 추종함에 있어 필수적인 전압 센서의 옵셋 오차에 대한 영향을 분석하고 이를 검출 및 보상하기 위한 알고리즘을 제안하였다. 전원전압 측정에 따른 옵셋 오차는 전원 주파수의 1배 맥동을 야기하여 전원 위상각이 왜곡된다. 왜곡된 전원 위상각에 의한 좌표변환시 동기 좌표계 dq축 전류에 전원 주파수 1배의 맥동을 야기하며 이는 계통측 상전류에 직류성분과 전원 주파수 2배의 고조파 성분을 발생시키게 된다. 따라서, 본 논문에서는 전원측정시 야기되는 옵셋 오차의 영향을 분석하고 이의 검출신호로 전원 위상각 제어기의 적분출력을 선정하였다. 또한 RMS(Root Mean Square) 기법을 이용하여 옵셋 성분을 검출 및 보상하는 알고리즘을 제안하였다. 제안된 알고리즘의 성능은 시뮬레이션과 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.267-268
• /
• 2012

본 논문에서는 3상 계통연계형 배터리 충전기의 전류리플 발생 원인을 분석하고 보상하는 기법을 제안한다. 배터리 전류리플의 요소로는 전류 측정 시 발생하는 오차에와 데드타임에 의해 각각 기본파, 2고조파, 6고조파 성분이 발생한다. 배터리 전류의 리플 성분은 배터리 수명을 저하시키는 요소 중 하나로 리플 성분을 보상하여 그 크기를 줄이는 알고리즘이 필요하다. 배터리 전류 리플 성분의 발생은 시뮬레이션과 실험을 통해 확인하였고, 공진형 전류제어기를 사용하여 특정 고조파에 해당하는 리플 성분을 보상하여 배터리 전류의 리플을 보상하는 알고리즘을 적용하여 배터리의 리플 성분이 감소함을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.449-450
• /
• 2012

본 논문에서는 MOSFET의 전계효과를 이용하여 LED 조명용 전력변환기 출력의 전류 리플을 최소화 하는 방법과 이로 인하여 발생하는 스위칭 손실을 최소화하는 기법을 제안한다. 제안하는 방식은 MOSFET의 선형영역을 사용하여 출력 전류를 제어함으로써, 전력변환기의 출력 전류에 리플이 발생하지 않는다. 이러한 방식은 스위칭 방식의 전력변환 회로에 비하여 출력전류리플이 상대적으로 매우 작기 때문에, 수동필터를 최소한으로 설계할 수 있는 장점을 갖는다. 제안된 방법을 전통적인 Buck 컨버터에 적용하고 시뮬레이션을 통하여 제안된 회로와 알고리즘의 이론적 타당성을 검증하였다.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.603-609
• /
• 2008

Slotless linear brushless DC motor are widely used in precision machine applications because of their advantages such as low of detent force, negligible iron loss. But they have a disadvantage such as low thrust density, thrust ripple, and excessive use of permanent magnet materials. These lead to undesirable performance and high production cost. In this paper, we deal with the design and characteristics investigation of a air-core tubular linear brushless DC(TLBLDC) motor with air-core stator and permanent magnet mover. And to investigate the static and dynamic characteristics of air-core TLBLDC motor, the prototype machine is manufactured and analyzed by F.E.M. and Matlab simulink simulations. Especially, dynamic characteristics of air-core TLBLDC motor driven with 6 step inverter are simulated by F.E.M.coupling with external circuit and Matlab simulink program, and measured for the prototype motor. The simulation results are compared to the experimental results such as current waves, thrust and speed curve.