• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.815-822
• /
• 2003

The ring rolling process involves not only three-dimensional non-steady material flow and continuous change of radius and thickness of the ring workpiece but also heat transfer among workpiece, rolls and environment. In this study, deformation and heat transfer analyses were conducted by using the three-dimensional thermo-rigid-plastic finite element method. Three cases of plain ring rolling process were, respectively, simulated for the predictions of roll forces and the highest temperature zone during the aluminum process that ductile fracture often occurs. In addition, to prevent fishtail phenomena of the ring workpiece, axial rolls were used for this study.

• 한국안전학회지
• /
• 제22권5호
• /
• pp.13-20
• /
• 2007

Elastomeric O-ring seals are widely used in static and dynamic applications. A compressed and highly pressurized O-ring seal inserted under laterally one-sided constrained condition has been analyzed experimentally and numerically. The deformed shape and extrusion length of the O-ring under high pressure has been measured by the computed tomography. Through the comparison of experimental and FE results, the numerical analysis technique has been verified. Using verified FE method, the contact stress profiles at sealing surfaces have been investigated and their relevance to the 0-ring performance evaluated based on stress-related and displacement-related parameters. It has been found that the contact stress profiles and deformation behaviors of the seal are affected by friction coefficient, gap clearance, and pressure considerably.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1727-1731
• /
• 2014

Dichloromethane liquid droplets containing a cobalt dipyrromethene trimer deposited on a graphite surface were found to form coffee ring, toroid ring, or volcano dot structures due to the redistribution of the solute during solvent evaporation. The shapes and size distributions of the ring structures depended on the drying temperature. The shape differences were attributed to the fact that the solvent evaporation rate controlled the self-assembly process that yielded the coffee stain and pinhole structures.

• 오토저널
• /
• 제6권1호
• /
• pp.56-62
• /
• 1984

Various automotive and machine parts are having the shape of circular ring and the study and the verification of its dynamic characteristics can be the important basis of quality control and improvement of performance of inner and outer race of ball and roller radial bearing, ring gear, seal, etc. In this study, three separate sets of governing equations on the flexural vibration of circular ring were formulated each considering the effects of viscous damping, rotatory inertia and shear deformation, and three frequency formulas were derived. Numerical values of frequencies of circular and rectangular cross section ring were tabulated and compared with experimental value. Some important parameters were found in the ring vibration characteristics.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.188-194
• /
• 2007

Tree-ring dating can be used to date scientifically prehistoric timbers, historical buildings or woodcrafts. It can give a calendar year to each tree ing and produces the felling dates of logs or wood panels. In this study, we applied tree-ring dating to three rice chests, whose dates of manufacturing are unknown. According to the shape of frame, we assumed that they should be made in Cholla Province. The last rings of the woods of three rice chests were dated A.D. 1830, A.D. 1870 and A.D. 1901, respectively. Tree-ring patterns indicated that two of them were collected from Kangwon province.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1988년도 추계학술발표회 논문집
• /
• pp.114-117
• /
• 1988

In mobile radio communication system involving geostationary satellites the field intensity of electromagnetic wave varies with frequency shape and location of an obstacle between a tramamitter and a receiver. In this paper a ring type obstacle between the propagation paths is presented. On the basis of Fresnel diffraction theory, the field intensity varying with ring-type obstacle’s radius is obtained by computer simulation.]

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.30-30
• /
• 2010

The Angle Ring and Cap which is called pressboard are settled at primary and secondary coil winding of 154 kV transformer that can reduce effectively distance of insulation. As it has not manufactured pressboard of Angle Ring and Cap for high voltage grade, insulation components industry especially high voltage transformer has not participate in a competition with worldwide yet. That's why is difficult to make an specialized shape of insulation components of high voltage grade. At first, it is very important to make an utility of deformation manufacturing for high voltage transformer insulation components by itself. Therefore it has finally completed to make an deformation manufacturing utility using an special analysis tools. In this paper, developed insulation components was investigates in tensile strength is introduced.

• 열처리공학회지
• /
• 제20권2호
• /
• pp.72-77
• /
• 2007

Abrasive wear between piston ring face and cylinder liner is an extremely unpredictable and hard-to-reproduce phenomenon that significantly decreases engine performance. Wear by abrasion are forms of wear caused by contact between a particle and solid material. Abrasive wear is the loss of material by the passage of hard particles over a surface. From the pin-on-disk test, particle dent test and scuffing test, abrasive wear characteristics of diesel engine cylinder liner-piston ring have been investigated. Pin-on-disk test results indicate that abrasive wear resistance is not simply related to the hardness of materials, but is influenced also by the microstructure, temperature, lubricity and micro- fracture properties. In particle dent test, dent resistance stress decreases with increasing temperature. From the scuffing test by using pin-on-disk tester, scuffing mechanisms for the soft coating and hard coating were proposed and experimentally confirmed.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.934-939
• /
• 2012

This paper proposes a new algorithm for ultrasonic sensors arranged on ring frame to identify obstacles surrounding itself by TOFs (time of flight). The ring frame has multiple channels consisting of a transmitter and a receiver. When the transmitter of a selected channel transmits ultrasonic signal, the TOFs of reflected signals from obstacles are acquired by the receiver of the channel. The process continues for all channels consecutively. Then, by using parabolic curve fitting of TOFs of all channel, the proposed algorithm not only calculates distances from multiple obstacles, but also identifies if the shape of obstacles are point or plane by the coefficients of the curve. By the experiment using 16 ultrasonic transceivers on the ring frame in the environment of two poles and two planes, we show the feasibility of the proposed scheme.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.188-193
• /
• 1996

This study was performed the blankholding force and vee-ring effects on Blanking characteristics, such as maximum blanking force, burnish, dish-shape, hardness. etc, in fine-blanking die by the experimental method. Two types of aluminum (Al. 1050-0, Al 5052-H) Such as annealed and unannealed materials were used for the experiment. In order to get a hydrostatic pressure effect, the clearance was set to 0.5% of the thickness of strip, and the counter punch and stripper plate with Vee-ring was set-up. While this experiment was carrying out, the average blanking Velocity was constant (37.5mm/sec) As a result of this study, we got a good surface roughness and a glassy shear plane(burnish) of the sheet over 90% thickness, and such as the excellent accuracy of dimensions, the good squareness and the reduction of dish-shape could be obtained, and also the additional results obtained were such that the hardness of shear plane was increased and the maximum blanking force was reduced in the condition of Vee-ring height of 1.0~1.5mm, and blankholding force of 1200kg.