• Membrane Journal
• /
• v.21 no.4
• /
• pp.321-328
• /
• 2011

$PrBa_{0.9}Sr_{0.1}Co_2O_{5+{\delta}}$ oxide was synthesized by soild state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed double perovskite structure. Leakage and oxygen permeation test were conducted on the membrane sealed by pyrex ring as a sealing material. Oxygen permeation was measured in the temperature range from 850 to $950^{\circ}C$. The oxygen flux of $PrBa_{0.9}Sr_{0.1}Co_2O_{5+{\delta}}$ membrane was increased with the temperature from 0.15 to $0.32mL/cm^2{\cdot}min$.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.488-496
• /
• 2000

this paper describes the design and implementation of node scheduling for MX Server that is CC-NUMA System COMSIX, the operating system of MX Server, is designed to suit for CC-NUMA Architecture. MX Server consists of up to 8 nodes, and each node is connected by SCI ring. This node scheduling scheme considers data locality for performance improvement of Oracle8i DBMS on the CC-NUMA architecture. For DBMS such as Oracle8i, a multi-threaded process may be run to tie on particular disk. We have developed a CG binding function that the multi-threaded process bound the node. Currently, We don't have an available CC-NUMA Platform. Instead of MX Server, we developed the Node scheduling scheme for multi-threaded process to suit server platform on the PC test-bed and tested completely.

• Nuclear Engineering and Technology
• /
• v.17 no.1
• /
• pp.34-44
• /
• 1985

The main purpose of this work is to study the effects of (1) configuration, size, and materials of electrodes, (2) flow pattern, (3) electrode position with respect to a dielectric boundary on the void fraction measurement and flow regime characterization by capacitance transducers. From the experimental results, relationships between the measured relative capacitance and void fraction are obtained for both annular and stratified flow systems under static condition, and this result is compared with theoretical predictions. From this study it can be concluded that (1) the strip-type electrodes are more sensitive than ring-type electrodes for both annular and stratified flows, (2) electrode size does not affect the relative capacitance vs. (1-$\alpha$) curve, and (3) electrode position is important for stratified flows but it has no effect on annular flows.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.439-450
• /
• 2019

Let R be a ring with unity. Given modules $M_R$ and $_RN$, $M_R$ is said to be absolutely $_RN$-pure if $M{\otimes}N{\rightarrow}L{\otimes}N$ is a monomorphism for every extension $L_R$ of $M_R$. For a module $M_R$, the subpurity domain of $M_R$ is defined to be the collection of all modules $_RN$ such that $M_R$ is absolutely $_RN$-pure. Clearly $M_R$ is absolutely $_RF$-pure for every flat module $_RF$, and that $M_R$ is FP-injective if the subpurity domain of M is the entire class of left modules. As an opposite of FP-injective modules, $M_R$ is said to be a test for flatness by subpurity (or t.f.b.s. for short) if its subpurity domain is as small as possible, namely, consisting of exactly the flat left modules. Every ring has a right t.f.b.s. module. $R_R$ is t.f.b.s. and every finitely generated right ideal is finitely presented if and only if R is right semihereditary. A domain R is $Pr{\ddot{u}}fer$ if and only if R is t.f.b.s. The rings whose simple right modules are t.f.b.s. or injective are completely characterized. Some necessary conditions for the rings whose right modules are t.f.b.s. or injective are obtained.

• Journal of Chest Surgery
• /
• v.54 no.3
• /
• pp.191-199
• /
• 2021

Background: Tracheal replacement is a challenge for thoracic surgeons due to stenosis in the trachea-prosthesis anastomosis. We propose that stenosis occurs due to fibrosis as a result of an abnormal healing process, characterized by an increased expression of wound healing growth factors (vascular endothelial growth factor [VEGF], survivin, and CD31), which promote angiogenesis and decrease apoptosis. We analyzed the immunoreactivity of VEGF, survivin, CD31, and caspase-3 in the development of fibrotic stenosis in prosthetic tracheal replacement. Methods: Fourteen dogs were operated on: group I (n=7) received a 6-ring cervical tracheal segment autograft, while in group II (n=7), a 6-ring segment of the cervical trachea was resected and tracheal continuity was restored with a Dacron prosthesis. The follow-up was 3 months. Immunoreactivity studies for VEGF, survivin, CD31, and caspase-3 were performed. A statistical analysis was done using the Wilcoxon signed rank test. Results: Four animals in group I were euthanized on the 10th postoperative day due to autograft necrosis. Three animals completed the study without anastomotic stenosis. Moderate expression of VEGF (p=0.038), survivin (p=0.038), and CD31 (p=0.038) was found. All group II animals developed stenosis in the trachea-prosthesis anastomotic sites. Microscopy showed abundant collagen and neovascularization vessels. Statistically significant immunoreactive expression of VEGF (p=0.015), survivin (p=0.017), and CD31 (p=0.011) was observed. No expression of caspase-3 was found. Conclusion: We found a strong correlation between fibrosis in trachea-prosthesis anastomoses and excessive angiogenesis, moderate to intense VEGF, CD31, and survivin expression, and null apoptotic activity. These factors led to uncontrolled collagen production.

• Advances in concrete construction
• /
• v.14 no.2
• /
• pp.93-102
• /
• 2022

In this study, limestone powder (LS) and fly ash (FA) were used as powder materials in self-compacting concrete (SCC) in increasing quantities in addition to cement, so that the two powders commonly used in the production of SCC could be compared in the same study. Considering the reduction of the maximum aggregate size in SCC, 10 mm or 16 mm was selected as the coarse aggregate size. The properties of fresh concrete were determined by slump flow (including T₅₀₀ time), V-funnel and J-ring experiments. The experimental results showed that as the amount of both LS and FA increased, the slump flow also increased. The increase in powder material had a negative effect on V-funnel flow times, causing it to increase; however, the increase in FA concretes was smaller compared to LS ones. The increase in the powder content reduced the amount of blockage in the J-ring test for both aggregate sizes. As the hardened concrete properties, the compressive and splitting strengths as well as the modulus of elasticity were determined. Longitudinal and transverse deformations were measured by attaching a special frame to the cylindrical specimens and the values of Poisson's ratio, initiation and critical stresses were obtained. Despite having a similar W/C ratio, all SCC exhibited higher compressive strength than NVC. Compressive strength increased with increasing powder content for both LS and FA; however, the increase of the FA was higher than the LS due to the pozzolanic effect. SCC with a coarse aggregate size of 16 mm showed higher strength than 10 mm for both powders. Similarly, the modulus of elasticity increased with the amount of powder material. Inelastic properties, which are rarely found in the literature for SCC, were determined by measuring the initial and critical stresses. Crack formation in SCC begins under lower stresses (corresponding to lower initial stresses) than in normal concretes, while critical stresses indicate a more brittle behavior by taking higher values.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.717-724
• /
• 2023

Residual shear strength is an important parameter in landslide dynamics and may be considered the critical factor in landslide triggering. Tests were undertaken using Jumunjin sands to examine the effects of smooth and rough surfaces on ring-shear characteristics. Under dense and drained conditions, shear velocities were recorded as 0.01, 0.1, 1, 10, 50, 100 mm s^-1, with shear strength increasing with velocity and producing increasingly fine content. Particle fragmentation may thus increase landslide mobilization when the landslide body is mixed with ambient water in channelized flows.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.263-275
• /
• 2023

Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ⁷⁰), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.108-115
• /
• 1990

Wear diagrams, which are the three dimensional representations of the dependence of the wear rate on the applied pressure and the sliding speed, were constructed with the pin on ring type wear test results using 52100 wear couples. The pressure and speed ranges from 0.45 MPa to 45.30 MPa and from 0.012 m/sec to 0.12 (0.120)m/sec, respectively. The results show the mild to severe transition, which suggests the change of the wear mechanisms as a function of the pressure and sliding speed. The SEM micrographs of the corresponding worn area shows clearly that different wear mechanisms dominate.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2930-2936
• /
• 2012

A three-dimensional pharmacophore hypothesis was developed for atypical antipsychotics in order to map common structural features of highly active compounds by using HipHop in CATALYST program. The pharmacophore hypotheses were generated using 12 compounds as training set and validated using 11 compounds as test set. The most predictive hypothesis (Hypo1) comprises five features viz. two hydrophobic regions, two hydrogen bond acceptor lipid and one aromatic ring. In the absence of information like crystallized structure of 5-$HT_{2A}$ receptor and binding mode of antipsychotics with 5-$HT_{2A}$ receptor, this hypothesis will serve as a potentially valuable tool in the design of novel atypical antipsychotics acting primarily at 5-$HT_{2A}$ and $D_2$ receptors.