• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.2
• /
• pp.93-101
• /
• 2015

This study was conducted to analyze the relationship between tree-ring growth of Quercus acutissima and climatic variables by dendroclimatological method. Annual tree-ring growth data of Quercus acutissima collected by the $5^{th}$ National Forest Inventory (NFI5) were organized to analyze the spatial distribution of the species growth pattern. To explain the relationship between tree-ring growth of Quercus acutissima and climatic variables, monthly temperature and precipitation data from 1950 to 2010 were compared with tree-ring growth data for each county. When tree-ring growth data were analyzed through cluster analysis based on similarity of climatic conditions, four clusters were identified. In addition, index chronology of Quercus acutissima for each cluster was produced through cross-dating and standardization procedures. The adequacy of index chronologies was tested using basic statistics such as mean sensitivity, auto correlation, signal to noise ratio, and expressed population signal of annual tree-ring growth. Response function analysis was conducted to reveal the relationship between tree-ring growth and climatic variables for each cluster. The results of this study are expected to provide valuable information necessary for estimating local growth characteristics of Quercus acutissima and for predicting changes in tree growth patterns caused by climate change.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.369-376
• /
• 2021

The International Maritime Organization has developed the Energy Efficiency Design Index, an index related to carbon dioxide emissions, to enforce regulations on newly built ships. In this study, a new type of energy-saving device called the ring stator was used for 158k crude oil carriers, whose hull form was developed as a very thin after-body hull to reduce the resistance by delaying separation. The Energy-Saving Device (ESD) particularly involving the duct, is not adapted to the thin-after body hull form-like container ship. This new ring stator was developed considering these characteristics. A parametric study was conducted through Computational Fluid Dynamics (CFD) analysis using the Star-CCM+ program, and approximately 3.4 % improvement in propulsion efficiency was achieved. Further optimization investigations and experimental studies should be conducted in the future.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1999

This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.59-69
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. the results are as following : It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable In sand and pebble impact.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.313-323
• /
• 2000

In this paper, we consider ring embedding problem on (n,k)-star graphs. We first present a new ring embedding strategy and also prove the superiority in expandability by showing its application into the fault-tolerant ring embedding problem with edge faults. This result can be applied to the multicating applications that use the underlying cycle properties on the multi-computer system.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1075-1083
• /
• 2013

This paper describes an ultra-wideband (UWB) antenna that uses a ring resonator concept. The proposed antenna can operate in the entire UWB, and the IEEE 802.11a frequency band can be rejected by inserting a notch stub into the ring resonator. The experiment results indicate that the measured impedance bandwidth of the proposed antenna is 17.5 GHz (2.5 GHz to at least 20 GHz). The proposed UWB antenna has omnidirectional radiation patterns with a gain variation of 3 dBi (1 dBi to 4 dBi).

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1486-1494
• /
• 2020

To evaluate transport-induced cladding embrittlement after interim-dry storage, ring compression tests were carried out at room temperature(RT) and 135 ℃. The ring compression test specimens were prepared by simulating the interim-dry storage conditions that include four peak cladding temperatures of 250, 300, 350 and 400 ℃, two tensile hoop stresses of 80 and 100 MPa, two hydrogen contents of 250 and 500 wt.ppm-H and a cooling rate of 0.3 ℃/min. Radial hydride fractions of the ring specimens vary depending on those interim-dry storage conditions. The RT compression tests generated lower offset strains than the 135 ℃ ones. In addition, the RT and 135 ℃ compression tests indicate that a higher peak cladding temperature, a higher tensile hoop stress and the lower hydrogen content generated a lower offset strain. Based on the embrittlement criterion of 2.0% offset strain, an allowable peak temperature during the interim-dry storage may be proposed to be less than 350 ℃ under the tensile hoop stress of 80 MPa at the terminal cool-down temperature of 135 ℃.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.143-147
• /
• 2008

Numerical analysis is performed to find flow and heat transfer characteristics for ring type heat exchanger. 3-D numerical predictions are carried out for the ring type heat exchanger system with Reynolds number varying in the range of 1,000 and 10,000. From the prediction, streamwise velocity, pressure drop, flow rate and heat transfer coefficient are analyzed. It is also found that characteristics of pressure drop and heat transfer generally follow well proportional variations of Re$m^$for the wide range of Reynolds number considered in this study.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.255-263
• /
• 2004

광명시 경륜 경기장은 국민 체육진흥공단에서 턴키(Turn key)공사로 발주하였고, CS구조+공간건축+대우건설, 삼성건설, 태영건설의 제출안이 당선되어 현재 시공중에 있다. 경기장의 저층부는 PC로 설계되었고, 지붕은 철골 트러스를 사용한 Dome 형상으로 이루어져 있다. 돔 지붕의 개념은 지붕에 물을 부었을 때 가장 흘러가기 쉬운 방향으로 트러스를 배치하여 유연한 힘의 흐름을 유도하는 것이다. 143.6m(폭)${\times}$183.5m(길이)${\times}$21m(높이)의 지붕엔 지붕의 개념인 Flow Truss를 물이 흐르는 방향의 방사형으로 배치하고, 내부에 압축링(Compression Ring Truss)과 외부에 인장링(Tension Ring Truss)를 설치하여 힘의 흐름을 단순화시켰고, 실내에서 보기에 플로우 트러스의 간격을 넓게 유지함으로써 개방감을 극대화시켰다. 또한 Flow Truss는 동일한 곡률과 길이로 설계하여 표준화시킴으로써 시공성과 경제성을 동시에 만족토록 하였다. 현재 저층부 시공은 거의 완료된 상황이고, 곧 지붕을 설치할 예정이다. 본 고에서는 돔 지붕의 형성 개념과 설계 과정을 살펴보고, 접합상세 등의 해결에 대해 살펴보겠다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.727-728
• /
• 2008

This paper deals with characteristic analysis of permanent magnet synchronous motor with full-ring magnet. The modeling of magnetic circuit is performed analytically. And then, analytical solution for open-circuit field distribution due to permanent magnet, back-EMF and torque are derived in terms of magnetic vector potential and two-dimensional polar coordinate system. The analytical results are validated extensively by finite element analyses. Finally, we performed experiments of permanent magnet synchronous motor with full-ring magnet.