• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.14-21
• /
• 2010

Fiber ring laser based intra-cavity absorption spectroscopic sensor has great potential for high sensitivity gas detection. Using the rate equations and propagation equations, we investigated theoretically factors that affect the sensitivity of such fiber ring laser sensors and determined the optimal design parameters and conditions for significant enhancement of the system sensitivity. Experiments have been conducted to determine the sensitivity enhancement performance. The results showed a factor of 25 ~ 30 in sensitivity enhancement in the experimental system, agreeing well with the theoretical expectations. Experiments on acetylene detection have also been carried out and the results showed that the ring cavity significantly increases the signal absorption and that high sensitivity can be obtained for gas detection.

• 한국광학회지
• /
• 제4권2호
• /
• pp.206-211
• /
• 1993

$LilO_3$ 결정에서 최대 출력 30mW의 저출력 CW 반도체레이저에 대한 제2조화파 발생 실험을 실시하였다. 두개의 오목 거울과 두개의 평면 거울로 이루어진 고리형 enhancement 공진기를 이용하여 제2조화파 변환 효율을 증가시켰다. 사용된 오목 거울의 곡률 반경은 50mm 이었고, $LilO_3$ 결정은 길이 5mm와 10mm의 두 개를 사용하였다. 펌핑 출력에 따른 제2조화파의 출력을 측정하고 이론값과 비교 하였다. 794nm의 펌프출력이 28mW 일 때 10mm의 $LilO_3$ 결정에서 $6.6{\mu}W$의 397 nm 출력을 얻을 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.259-262
• /
• 2013

This paper analyzes the effects of metamaterial slabs with negative permeability when applied to a two-loop wireless power transmission (WPT) system, both in theory and electromagnetic (EM) simulations. The analysis of magnetic flux focusing provided here assumes quasi-magnetostatics or magnetostatics. The slab structures with negative permeability have been realized using the periodically arrayed ring resonators (RRs) at 13.36MHz. Some examples with ideal lossless slabs of -1, -2, and -3 showed a great enhancement of WPT efficiencies when compared with the free space cases. However, practical lossy slabs made of planar copper RRs did not show significant enhancement of WPT efficiencies due to the relatively high losses in the ring resonator (or in the slab consisting of RRs) near the resonant frequency.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.110-113
• /
• 2007

난류 고리가 장착된 가스발생기의 난류 생성을 연구하기 위하여 LES 코드가 개발되어 검증을 하였다. 난류 고리의 형상과 길이를 변경에 따른 난류 발생 정도를 비교하였으며, 혼합 정도를 비교하기 위하여 유동장의 변동 속도를 이용한 두 가지 변동량의 값을 구하였으며, 혼합 정도를 정량화 하였다.

• 한국통신학회논문지
• /
• 제29권1C호
• /
• pp.45-49
• /
• 2004

본 논문은 수정된 이방성 확산 펄터를 이용한 영상 개선 방법을 제안하였다. 이를 위하여 최소 신뢰 스케일을 기반으로 하는 센서 잡음 추정과 스케일 스페이스 방법을 도입하였다. 이때 이방성 필터는 구해진 임계값 함수와 국부 기울기에 의해 수정되었다. 모의 실험을 통해 제안한 방법이 평탄 영역에서의 잡음을 거의 증폭시키지 않으면서도 뛰어난 에지 향상을 보임을 증명할 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.86-91
• /
• 2010

In this paper, a double-layered frequency selective surface(FSS) superstrate was built and tested. The unit cell of the proposed FSS consists of a ring slot and a dipole-shaped structure and shows a complementary frequency response. Each unit cell is printed on two sides of a substrate. By using these double-layered structures, the first resonant frequency of the pass-band can be lowered. As a result, the size of the unit cell is minimized and the spacing between the other cells is reduced. The proposed FSS-dipole composite antenna is designed for the gain enhancement of wide-band code division multiple access(WCDMA) frequency bands(1.92~2.17 GHz) with a low quality factor(Q=0.17). To verify the gain enhancement performance of the FSS, an FSS-dipole composite antenna was created. Although the FSS layer enhances the gain of the primary radiation source of the dipole antenna, the FSS-dipole complex antenna cannot show a uniform gain over the entire desired frequency band. The experimental results show a gain enhancement of 3 dBi with an FSS superstrate in the WCDMA frequency band.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.211-214
• /
• 1995

The catalytic activities of palladium(0,Ⅰ,Ⅱ)-diphosphine complexes were investigated in styrene oxidation using H2O2 as terminal oxidant. The rates showed a dependence on the chelate ring patterns of complexes (PdCl2L); 5-membered ring (L=dppe: 1,2-bis(diphenylphosphino)ethane) < 6-membered ring (L=dppp: 1,3-bis(diphenylphosphino)propane) < 4-membered ring (L= dppm: bis(diphenylphosphino)methane). This sequence correlates with the ligand field strength and interactions between metal and phosphine ligands. Pd(Ⅱ,Ⅰ)-diphosphine complexes which are capable of making 4-membered chelate ring showed an enhancement of catalytic activities for styrene oxidation. The catalytic activities of Pd(0,Ⅰ,Ⅱ)-diphosphine complexes are described in terms of electronic and steric factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.334-337
• /
• 2005

This paper describes the implementation of DCS communication network that provides high bandwidth and reliability. The network for DCS in this paper adopts the Reflective Memory (RM) architecture and Fast Ethernet physical media that have 100Mbps bandwidth. Also, this network uses Ring Enhancement Device (RED) which was invented to reduce the time delay of each node. The DCS network that is introduced in this paper is named as ERCNet(Ethernet based Real-time Control Network). This paper describes the architecture and working algorithms of ERCNet and performs numerical analysis. In addition, the performance of ERCNet is evaluated by experiment using the developed ERCNet network.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1040-1048
• /
• 1987

We propose a hardware architecture called Multiring which is applicable for various geometrical operations on rectilinear objects such as design rule checking in VLSI layout and many image processing operations including noise suppression and coutour extraction. It has both a fast execution speed and extremely high flexibility. The whole architecture is mainly divided into four parts` I/O between host and Multiring, ring memory, linear processor array and instruction decoder. Data transmission between host and Multiring is bit serial thereby reducing the bandwidth requirement for teh channel and the number of external pins, while each row data in the bit map stored in ring memory is processed in the corresponding processor in full parallelism. Each processor is simultaneously configured by the instruction decoder/controller to perform one of the 16 basic instructions such as Boolean (AND, OR, NOT, and Copy), geometrical(Expand and Shrink), and I/O operations each ring cycle, which gives Multiring maximal flexibility in terms of design rule change or the instruction set enhancement. Correct functional behavior of Multiring was confirmed by successfully running a software simulator having one-to-one structural correspondence to the Multiring hardware.

• Archives of Pharmacal Research
• /
• 제25권3호
• /
• pp.240-249
• /
• 2002

Dibenzyl-g-butyrolactone and 1,2,3,4-tetrahydro-2-naphthoic acid $\gamma$-lactone (TNL) derivatives were synthesized and evaluated for cytotoxic activity against some cancer cell lines. It was found that TNL derivatives with a shorter distance between C-4 in ring A and C'-2 in ring C were more cytotoxic, while dibenzyl-${\gamma}$-butyrolactones with a longer one were nearly inactive. In TNL series, presence of 3,4-dioxy group in ring A and 2-methoxy group in ring C was essential for the enhancement of the activity.