• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.430-432
• /
• 2004

Multicasting is an efficient means of one to many (or many to many) communications. Due to the frequent and unpredictable topology changes, multicast still remains as challenge and no one-size-fits-all protocol could serve all kinds of needs in ad hoc network. Protocols and approaches currently proposed on this issue could be classified mainly into four categories, tree-based, meshed-based, statelessness and hybrid. In this article, we borrow the concept of Eulerian ring in graph theory and propose a novel ring-based multicast framework--Hierarchical Eulerian Ring-Oriented Multicast Architecture (HEROMA) over wireless mobile Ad hoc network. It is familiar with hybrid protocol based on mesh and tree who concentrates on efficiency and robustness simultaneously. Architecture and recovery algorithm of HEROMA are investigated in details. Simulation result is also presented, which show different level of improvements on end-to-end delay in scenario of small scale.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.183-185
• /
• 2010

A 2.4 GHz dual-polarized antenna for a Doppler radar is studied. The proposed dual-polarized antenna using a stacked annular ring patch with two co-centric gap-coupled feed lines and a $90^{\circ}$ hybrid exhibits fairly good performance of 22 dB isolation at a center frequency of 2.4 GHz. Using a $90^{\circ}$ hybrid, a right-handed circular polarization for the transmitter and a left-handed circular polarization for the receiver are implemented. The gain of the designed antenna is about 0 dBi over operating frequencies. The antenna size including a ground plane is only $40{\times}40\;mm^2$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.15-22
• /
• 1991

New design method of small-sized 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wilkinson power divider using both lumped elements and distributed elements are presented. At the center frequency of 900 MHz 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wikinson power divider are designed and tested. Good agreements are obtained between measured and theoretical modeling results, and at the same time the circuit area is reduced by more than 70% compared with the discributed-type circuits.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.34-36
• /
• 1998

In these days the hybrid interrupters are widely used for medium voltage class circuit breakers. In the design of the hybrid interrupter, the shape of the short-circuit ring is one of the most important design parameters. Recently the investigation into the phase difference between arc current and magnetic field due to the shape variation of the short circuit ring has been conducted. In this paper, the results of eddy current analyses in the hybrid interrupter and test result are presented.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.102-107
• /
• 2011

In this paper, a small double ring resonator reflector was designed and fabricated using a polymer waveguide, and the measurement result was discussed. A widely tunable characteristic of the small double ring resonator caused by the Vernier effect, which results from the difference of the ring radii, was observed. The insertion loss of the double ring reflector was reduced by minimizing the device length to be as short as possible, and thus the output power and the SMSR (side mode suppression ratio) was greatly enhanced. The hybrid integrated laser based on the small double ring resonator reflector lased with the SMSR of 45 dB. In addition, the wide tuning range of 40 nm could be obtained by injecting a current of 30 mA to an electrode on top of the reflector.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2009

In this paper, a low-cost hybrid-integrated tunable laser is realized using a polymer-ring resonator-based add/drop filter reflector and a reflective semiconductor optical amplifier. The add/drop filter reflector, composed of a double-ring resonator with different radii, can have characteristics of selective wavelength reflection and wide wavelength tuning with an aid of vernier effect derived from the radii difference. By hybrid-integrating the reflective semiconductor optical amplifier with the add/drop filter reflector, a tunable laser can be realized through an active alignment method. The hybrid laser exhibited a single mode lasing with side mode suppression ratio of 26 dB and full width half maximum of 0.03 nm. In addition, applying a low current as small as 25 mA onto electrodes over add/drop filter reflector, a wavelength tuning range of 17 nm could be obtained.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.564-568
• /
• 2014

We present a 25-Gb/s optical transmitter composed of a Si ring modulator and CMOS driver circuit. The Si ring modulator is realized with 220-nm Si-on-insulator process and the driver circuit with 65-nm CMOS process. The modulator and the driver are hybrid-integrated on the printed circuit board with bonding wires. The driver is designed so that the parasitic bonding wire inductance provides enhanced driver bandwidth. The transmitter successfully demonstrates 25-Gb/s operation.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1285-1293
• /
• 2018

This paper proposes a new type of consequent-pole permanent-magnet (CPPM) machine with stator axial magnetic ring that increases torque capability over a wide speed range and enhances efficiency for the built-in rare-earth permanent magnet synchronous machine used in new energy vehicles. The excitation winding of the CPPM hybrid excitation synchronous machine in the stator is replaced by ferrite magnetic ring to simplify the structure and manufacturing process of the machine. The basic structure and magnetic regulation principle of the proposed machine are introduced and compared with the traditional interior rare-earth permanent magnet synchronous machine and CPPM hybrid excitation synchronous machine. Finally, experimental results of a new type of CPPM synchronous motor prototype with axial magnetic ring are introduced in the paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.1034-1037
• /
• 2002

This paper presents an optimum design of rotor-bearing system using a hybrid method to compute the solutions of optimization problem. The present hybrid algorithm namely Enhanced Artificial Life Algorithm(EALA), is a synthesis of an artificial life algorithm(ALA) and the random tabu search(R-tabu) method. We applied EALA to the optimum design of rotor-shaft system supported by the floating ring journal bearings. we will propose the optimum shape of rotor, position and shape of bearings. Through this study, we investigate the reliability and usefulness of EALA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.400.1-400
• /
• 2002

This paper presents an optimum design of rotor-bearing system using a hybrid method to compute the solutions of optimization problem. The present hybrid algorithm, namely Enhanced Artificial Life Algorithm(EALA), is a synthesis of an artificial life algorithm(ALA) and the random tabu search(R-tabu) method. We applied EALA to the optimum design of rotor-shaft system supported by the floating ring journal bearings. (omitted)