• 한국가시화정보학회지
• /
• 제22권2호
• /
• pp.35-43
• /
• 2024

Microparticle separation has demonstrated significant potential for biological, chemical, and medical applications. We introduce a surface acoustic wave (SAW)-based microfluidic device for separation of elastic and rigid microspheres based on their property and size. By tuning the SAWs to match the resonant frequencies of certain microspheres, those particles could be selectively separated from the other microspheres. When microspheres are exposed to an acoustic field, they experience the SAW-induced acoustic radiation force (ARF), whose magnitude is dependent on the microparticle size and properties. We modeled the SAW-induced ARF based on elastic sphere theory and conducted a series of experiments to separate elastic and rigid microspheres. We further utilized the acoustofluidic method for the separation of Thalassiosira Eccentrica microalgae based on the differences in their sizes with purity exceeding 90%. We anticipate that our technique will open up new possibilities for sample preparation, detection, and diagnosis in various emerging biological and medical analyses.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.81-92
• /
• 1992

본 논문은 비정상 공동 프로펠러의 영향하에 있는 선체표면의 경계치 문제를 해석하고, 이로부터 선체표면에 유기되는 변동압력을 추정할 수 있는 프로그램의 개발과정을 다루고 있다. 본 논문에서는 개발된 프로그램을 캐비티를 표현하는 쏘오스의 영향하에 있는 구 주위의 유동해석에 적용하여 Butler의 해석해와 비교한 것을 싣고 있으며, 특히 자유수면 조건을 고주파수 근사방식 또는 강체벽 근사방식으로 근사화하였을때 변동압력에 미치는 영향을 조사하였다. 또한 실제 RO-RO선을 대상으로 예제 계산을 수행하여, 선박설계과정에서 선체표면 기진력의 해석에 사용될 수 있음을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1203-1210
• /
• 2007

Robots have begun to perform various tasks on replacing the human in the daily life such as cleaning, entertainments etc. In order to accomplish the effective performance of intricate and precise tasks, robot hand must have special capabilities, such as decision making in given condition, autonomy in unknown situation and stable manipulation of object. In this study, we addresses the development of a 3-fingered humanoid robot hand system. We execute static analysis, vibration analysis and flexible dynamics to reserve stability at the design. Grasp motion of the finger uses a linear actuator and gears. Motion can be distinguished into four parts depending on the grasping thin paper, sphere, and column. In each motion, we compare the displacement of the case to be rigid with the case to be flexible. As a result, manufactured and feasibility of the robot hand is validated through preliminary experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.484-488
• /
• 2007

In this paper, the measurement system using the microphone array developed for analyzing cabin noise of the vehicle and its applications are discussed. The sensor is a three dimensional microphone array, the microphones and cameras are equipped on the rigid sphere. The cameras are used for acoustic visualization. As applications, the experiments in both reverberation chamber and anechoic chamber are discussed. These results show that this system is very useful to evaluate or improve the vehicle sound insulation performance.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.153-156
• /
• 1999

이 연구에서는 구조적 HRTF(Head-Related Transfer Function) 모델의 구성 이론에 관하여 기술하였다. 이 모델은 강체 구(rigid sphere)에 대한 음파의 전파와 회절 현상에 대한 이를 식을 근거로 구성하였다. 이 모델은, 구성이 단순하고, 모델 구성에 필요한 계수의 수를 극소화 할 수 있기 때문에 실시간 구현에 적합하다. 그리고, 각개인의 머리전달특성에 따른 개인차를 반영하여 모델을 수정할 수 있는 장점이 있다.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1183-1185
• /
• 1997

Dimethylamine complexes of palladium(Ⅱ) [(PCP)Pd(NHMe2)](OTf) (PCP = 2,6-(R2PCH2)2C6H3); R = Ph (1), R = Cy (2)), have been prepared from the reaction of (PCP)Pd(OTf) and dimethylamine. The complex 1 is stable both in solution and in the solid state, while 2 is stable only in solution in the presence of dimethylamine although the formation of 2 in solution is quantitative by NMR Spectroscopy. A solution NMR spectroscopic study shows that dimethylamine favors over carbon monoxide in the coordination sphere of palladium(Ⅱ) having rigid terdentate ligands. The complexes 1 and 2 in chlorinated solvents undergo a chlorine abstract reaction yielding Pd(2,6-(R2PCH2)2C6H3)Cl in the presence of a base such as dimethylamine and DABCO (diazabicyclooctane), in which a transient dimethylamido palladium(Ⅱ) species likely involves.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.651-659
• /
• 2019

The IB-SEM numerical method combines the spectral/hp element method and the rigid immersed boundary method. This method avoids the problems of low computational efficiency and errors that are caused by the re-division of the grid when the solids move. Based on the Fourier transformation and the 3D immersed boundary method, the 3D IB-SEM system was established. Then, using the open MPI and the Hamilton HPC service, the computational efficiency was increased substantially. The flows around a cylinder and a sphere were simulated by the system. The surface of the cylinder generates vortices with alternating shedding, and these vortices result in a periodic force acting on the surface of the cylinder. When the shedding vortices enter the flow field behind the cylinder, a recirculation zone is formed. Finally, the three-dimensional pore flow was successfully investigated.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.167-172
• /
• 2023

Titanium alloys are widely recognized among engineering materials owing to their impressive mechanical properties, including high strength-to-weight ratios, fracture toughness, resistance to fatigue, and corrosion resistance. Consequently, applications involving titanium alloys are more susceptible to damage from unforeseen events, such as scratches. Nevertheless, the impact of microscopic damage remains an area that requires further investigation. This study delves into the microscopic wear behavior of α-titanium crystal structures when subjected to linear scratch-induced damage conditions, utilizing molecular dynamics simulations as the primary methodology. The configuration of crystal lattice structures plays a crucial role in influencing material properties such as slip, which pertains to the movement of dislocations within the crystal structure. The molecular dynamics technique surpasses the constraints of observing microscopic phenomena over brief intervals, such as sub-nano- or pico-second intervals. First, we demonstrate the localized transformation of lattice structures at the end of initialization, indentation, and wear processes. In addition, we obtain the exerted force on a rigid sphere during scratching under linear movement. Furthermore, we investigate the effect of the relaxation period between indentation and scratch deformation. Finally, we conduct a comparison study of nanoindentation between crystal and amorphous Ti substrates. Thus, this study reveals the underlying physics of the microscopic transformation of the α-titanium crystal structure under wear-like accidental events.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.84-92
• /
• 2000

본 논문에서는 유한요소와 무한요소를 사용하여 수중 산란체의 산란해석을 수행하였다. 무한영역을 유한영역으로 나누어 유한영역은 유한요소를 사용하여 모델링하고 무한/유한 영역의 경계면에서는 비반사조건을 만족시키기 위하여 무한요소를 사용하되 파동 특성이 가미된 IWEE(Infinite Wave Envelope Element)를 사용하였다. 수중 강체구의 산란해석에 유한요소의 차수, 크기 및 유한요소 모델 그리고 IWEE가 미치는 영향을 살펴보았다. 수치적 산란해석에서 인위적 반사를 줄이기 위해서는 유한요소와 IWEE의 연결을 유연하게 하기 위하여 유한요소는 잘게 나누거나 이차요소를 사용하는 것이 좋으며 IWEE에서는 고차를 사용하는 것이 바람직하다.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.378-384
• /
• 2020

The friction surfaces of mechanical parts are heat-treated or coated with hard materials to minimize wear. Increasing the hardness is a very useful way to reduce abrasive wear. The general Brinell hardness test, which is widely used for metallic materials, is not suitable because it hardly shows any change in hardness when coated with thin films. In this study, we propose a basis for the application of the new Brinell hardness test method to the coated friction surface. An indentation analysis of the rigid sphere and elastic-perfectly plastic materials is performed using a commercial finite element analysis software. The results indicate that their loadto-diameter ratio is the same; the Brinell hardness test method can be applied even when the indenter diameter is on the micrometer scale. In the case of hard coating, it is difficult to calculate Brinell hardness using the diameter of the indentation, but the study revealed, for the first time, that it can be calculated using the depth of the indentation regardless of coating. The change in hardness owing to thin film coating over a wide load range implies that the hardness evaluation method is appropriate. Additional studies on various properties related to the substrate and coating material are required to apply the proposed method.