• 제목/요약/키워드: Right angle

검색결과 1,014건 처리시간 0.03초

반사형 쌍안정 카이랄 스플레이 네마틱 액정표시소자 (Reflective Bistable Chiral Splay Nematic Liquid Crystal Display)

  • 김태형;이중하;신정국;장지향;김정수;전철규;권순범;윤태훈;김재창
    • 한국광학회지
    • /
    • 제22권1호
    • /
    • pp.23-29
    • /
    • 2011
  • 쌍안정 카이랄 스플레이 네마틱 액정표시소자는 스플레이 상태와 $-\pi$ 꼬인 상태를 쌍안정 상태로 사용하는 메모리 액정표시소자이다. 셀 갭/피치의 값이 0.25일 경우 완전한 쌍안정 상태를 갖지만, $-\pi$ 꼬인 상태에서 스플레이 상태로 전이시키기 위하여 fringe 전계를 인가할 경우 픽셀영역은 전계의 왜곡에 의해서 완전한 스플레이 상태가 아니라 $-\pi$ 꼬인 상태를 부분적으로 유지하게 된다. 본 논문에서는 화소영역에서 두 안정한 상태가 공존하지 않는 $-\pi$ 꼬인 상태를 어두운 상태로 사용하는 반사형 쌍안정 카이랄 스플레이 네마틱 액정표시소자를 제안한다. 제작된 반사형 액정표시소자는 30:1의 고명암비를 나타냈으며, 응답속도는 수직전압 8 V, fringe 전압 12 V의 구동 전압으로 각각 쓰기 응답시간이 950 ms, 리셋 응답시간이 450 ms였다. 또한 제안된 셀은 +C 광학 보상 필름을 사용하여 좌우 방향에서 $180^{\circ}$의 광시야각을 나타냈다.

아킬레스건 파열의 수술적치료 -단단 봉합술 및 건외막피복술- (Surgical Treatment of Ruptured Achilles Tendon - End-to-end suture & Paratendinous wrapping)

  • 황득수;이원석;김경천
    • 대한정형외과스포츠의학회지
    • /
    • 제1권2호
    • /
    • pp.138-142
    • /
    • 2002
  • 목적: 스포츠와관련된급성아킬레스건파열의직접봉합및건외막피복술의결과및예후를평가하였다. 대상및방법: 1997년부터2001년까지수술후1년이상추시가능했던21예를대상으로하였다. 30대가$55\%$로가장많았으며축구후에생긴파열이5예로가장많았고, 양측이간격을두고파열된경우가2예로확인되었다. 수술은수상후1주이내에시행하였으며, 단단봉합술후주위건외막조직을충분히봉합하여혈액순환을최대한유지한상태로봉합부를피복하였다. 수술후슬관절을25도굴곡, 족관절은족저굴곡된상태로6주간장하지석고고정후2주간격으로단하지석고고정및족관절첨족을기능적위치로전환하여10주째90도족배굴곡상태로회복시켰다. 결과는Hooker의기준을이용하여수술후평균28개월에평가하였다. 결과: 환측이정상측에비해발뒤꿈치-지면거리가평균0.7cm 감소하였고, 20회체중부하족저굴곡후에는0.8 cm 감소하였으며, 하퇴둘레는0.3 cm 감소하였고, 능동적운동범위는족배굴곡과족저굴곡이각각3도와5도가감소하였다. 수술결과는1 6예에서우수, 5예에서양호를보였으며재파열이나상처부위괴사및감염의후유증은없었다. 결론: 아킬레스건파열의단단봉합술후주위건외막조직의충분한피복봉합은건의치유와수술후유착방지에, 그리고수술후주기적족관절족배교정은잔여첨족변형의예방에좋은치료방법이다

  • PDF

신경병증성 통증에 대한 자동염전침의 진통효과 및 opioid 기전 (The Effects of Automatically Controlled Rotating Acupuncture on Thermal Allodynia in a Rat Model of Neuropathic Pain: Mediation by Endogenous Opioid System)

  • 박정혁;김선광;나효석;문학진;민병일;김기홍;임성수;이순걸;이상훈
    • Journal of Acupuncture Research
    • /
    • 제23권5호
    • /
    • pp.23-29
    • /
    • 2006
  • Objectives : The present study was conducted to evaluate the effects of automatically controlled rotating acupuncture (ACRA) on thermal allodynia in neuropathic pain rats, and to examine whether the endogenous opioid system mediates the effects of ACRA. Methods : For the neuropathic surgery, the right superior caudal trunk was resected at the level between S1 and S2 spinal nerves innervating the tail. Two weeks after the nerve injury, ACRA stimulation with 4 different stimulation conditions (i.e., angle and frequency of rotation: 90o+1Hz, 90o+1/4Hz, 360o+/1Hz, and 360o+1/4Hz) was delivered to the Zusanli (ST36) acupoint for 15 min. The behavioral signs of thermal allodynia were evaluated by the tail immersion test (i.e., immersing the tail in cold $(4^{\circ}C)$ or warm $(4^{\circ}C)$ water and measuring the latency to an abrupt tail movement) before and after the stimulation. In an additional set of experiments, we examined the effects of naloxone (opioid Results : ACRA stimulations under all of the conditions above significantly relieved thermal antagonist, 2mg/kg, i.p.) on the action of ACRA stimulation. allodynia. There is no difference in the anti-allodynic effects among the 4 stimulation conditions. In addition, the effect of ACRA on thermal allodynia was reversed by naloxone pretreatment. Conclusion : These results indicate that ACRA stimulations have relieving effects on thermal allodynia in neuropathic pain rats, irrespective of stimulation parameters, and that this is mediated by the endogenous opioid system.

  • PDF

하악 이부확장 시 하악골 이동 양상과 응력 분포에 관한 삼차원 유한요소법적 연구 (A 3-D finite element analysis on the mandibular movement pattern and stress distribution during symphyseal widening)

  • 이도훈;홍현실;채종문;조진형;김상철
    • 대한치과교정학회지
    • /
    • 제38권1호
    • /
    • pp.13-30
    • /
    • 2008
  • 하악 이부확장에서 골 절단선의 위치 및 종류와 견인 장치의 종류에 따른 차이를 알아보고자 삼차원 유한요소법으로 하악골의 이동 양상 및 응력 분포를 조사하였다. 골 견인장치의 종류로는 치아 의존형과 골 의존형, 혼합형, $30^{\circ}$ 기울여 위치한 치아 의존형의 4가지를, 골절단 위치와 방법으로 하악 중절치 간 수직절단과 하악 정중이부를 관통하는 계단식 골절단 등의 2가지를 설정하였다. 연구 결과, 골절단의 위치 및 방법과 견인장치의 종류에 관계없이 과두를 포함한 하악골의 모든 부위에서 외측방 변위를 보였으며 상하적이나 전후방적 변위는 적은 양이었으나 방향에 있어 군간에 차이를 보였다. 치아 의존형 장치에 의한 골절단면 이개 양태는 V형이었으나 골 의존형 장치는 역V형이고 혼합형 장치는 평행하게 확장되었다. 골 의존형 장치에 의한 하악각의 외측 변위량이 다른 장치에 비해 컸다. $30^{\circ}$ 기울여 위치한 치아 의존형에서의 변위는 측방적, 전후방적 면에서 좌우 차이가 인정되었다.

3차원 전산화 단층촬영을 이용한 상악 정중 과잉치의 진단 (THE DIAGNOSIS OF IMPACTED MAXILLARY MESIODENS USING 3-DIMENSIONAL COMPUTED TOMOGRAPHY : A CASE REPORT)

  • 홍영우;김성오;손흥규;이종갑
    • 대한소아치과학회지
    • /
    • 제25권3호
    • /
    • pp.549-554
    • /
    • 1998
  • 저자는 매복된 상악 정중 과잉치를 주소로 내원한 환아를 3차원 전산화 단층촬영술을 이용해 매복된 과잉치의 위치를 파악하였으며 다음의 결론을 얻었다. 1. 인접한 영구치에 대한 위해한 영향을 주지 않기 위해 상악 정중 매복 과잉치의 정확한 위치 판별이 요구된다. 2. 3차원 전산화 단층촬영법은 매복 과잉치의 위치판별에 있어서 객관적인 중요한 정보를 제공한다.

  • PDF

한국산(韓國産) 능수버드나무류(類)의 수량적(数量的) 분류(分類)에 관(關)한 연구(硏究) (Quantitative Taxonomic Studies on the Group of Salix pseudo-lasiogyne Growing in Korea)

  • 김은식;이창복
    • 한국산림과학회지
    • /
    • 제59권1호
    • /
    • pp.1-8
    • /
    • 1983
  • 한국산(韓國産) 능수버드나무류(類)에 대한 식별(識別)과 형질변이(形質變異)에 관한 분류학적(分類學的) 문제(問題)들을 해결(解決)하기 위하여 수원시내(水原市內)에 가로수(街路樹)로 식재(植栽)된 능수버드나무류(類) 5종(種)에 대하여 1982년(年) 4월(月)부터 10월(月)에 걸쳐 꽃과 잎의 36 가지 특성(特性)을 측정(測定)하여 유집분석(類集分析), 주요인분석(主要因分析) 및 요인분석(要因分析) 등(等)의 방법(方法)을 이용(利用)하여 수량적(數量的) 분류(分類)를 시도(試圖)하였다. Mahalanobis distance에 의한 분류결과(分類結果)는 능수버들과 수양버들이 가장 먼저 연관(聯關)되고, 개수양버들과 용버들은 다음에 연관(聯關)되었으며 버드나무는 이들 종(種)으로부터 떨어져서 이들과 연관(聯關)되었는데, 이 결과(結果)는 Lattice distance와 Euclidean distance에 의(依)한 결과(結果)와 동일(同一)하였다. 유집분석(類集分析)을 함에 있어서 기관수(器官數)와 형질수(形質數)를 늘릴 수록 종(種)들 상호간(相互間)에 유집(類集)이 더욱 효율적(效率的)으로 나타났고, 주요인분석(主要因分析)에 의(依)한 종간(種間) 관계(關係)는 유집분석(類集分析)에 의한 결과(結果)와 같았으며, 제(第)1, 제(第)2, 제(第)3의 주요인자(主要因子)가 종간관계(種間關係)를 설명(說明)할 수 있는 분산(分散)은 62.2%이었는데, 요인분석(要因分析)의 결과(結果) 엽신폭(葉身幅), 거치수(鋸齒數), 엽각(葉角), 한 화수(花穗)에 달린 꽃의 수(數) 및 엽병장비(葉柄長比) 등(等)이 이들 종(種)을 분류(分類) 식별(識別)함에 있어서 주요(主要)한 형질(形質) 요인(要因)임이 확인(確認)되었다. 이러한 수량적(數量的) 분류(分類)는 종간(種間) 관계(關係)를 설명(說明)하고 주요형질요인(主要形質要因)을 추론(推論)하는데 효과적(效果的)이었다.

  • PDF

직접분사식 엔진내의 분무/벽 충돌 현상에서 텀블 효과에 관한 연구 (A Numerical Study of Tumble Effect on Spray/wall Impingement in the D. I. Engines)

  • 채수;양협;유수열;유홍선
    • 한국자동차공학회논문집
    • /
    • 제10권5호
    • /
    • pp.45-57
    • /
    • 2002
  • In this paper, the results gained by applying many impingement models to the cylinder and flat plate were analyzed in comparison with the experimental data to study a spray/wall interaction phenomena. To begin with, the behavior of spray injected normal to the wall was analysed using three different impingement models ; Naber and Reitz model(NR model), Watkins and Wang model(WW model) and Park and Watkins model(PW model) in the present calculation. The results obtained from these models were compared with experimental data of Katsura et. al. The results indicated that PW model was in better agreement with experimental data than the NR and WW model. Also f3r spray injected at 30DEG , the result of three models were compared with experimental data of Fujimoto et. al. The results showed that m model overpredicted the penetration in the radial direction because this model was based on the inviscid jet analogy. WW model did not predicted the radius and height of the wall spray effectively. It might be thought that this discrepancy was due to the lack of consideration of spray film velocity occurred at impingement site. The result of PW model agrees with the experimental data as time goes on. In particular, a height of the spray droplets was predicted more closely to the experimental data than the other two models. The results of PW model in which the spray droplets were distributed densely around the edge of droplet distribution shaped in a circle had an agreement with the experimental data of Fujimoto et. al. Therefore, it was concluded that PW model performed better than M and WW model for prediction of spray behavior. The numerical calculation using PW model performed to the cylinder similar to the real shape of DI engine. The results showed that vortex strength near the wall in the cylinder was stronger than that in the case of flat plate. Contrary to the flat plat, an existence of the side wall in the cylinder caused the tangential velocity component to be reduced and the normal velocity component to be increased. The flow tends to rotate to the inside of cylinder going upward to the right side wall of cylinder gradually as time passes. Also, the results showed that as the spray angle increases, the gas velocity distribution and the tumble flow seemed to be formed widely.

가변형 핑거 조인트를 가지는 신축이음장치의 구조 성능 실험 (An Experiment of Structural Performance of Expansion Joint with Rotation Finger)

  • 유성원
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권6호
    • /
    • pp.170-175
    • /
    • 2018
  • 내진 성능 학보를 위해서는 신축이음장치가 지진력에 대하여 적절한 변형이 발생하여 신축이음장치의 파괴를 방지하여야 하는데 최근에 국내에서 신축이음장치의 핑거부에 힌지를 설치하여 교축방향의 지진력에 대한 변위 저항성을 확보한 신제품이 개발되고 있다. 이에 본 논문에서는 가변형 핑거 조인트를 가지는 신축이음장치에 대하여 실물규모의 교축직각방향 하중에 대한 저항성을 실험적으로 평가하였다. 실험결과, 최대 수평변위는 기존 신축이음 실험체의 경우 약 21.1mm, 내진 신축이음 실험체의 경우 51.00mm로 나타났으며, 기존제품은 추가적으로 16.5mm의 솟음이 발생되었다. 기존 신축이음 실험체는 어느 정도의 교축직각 방향의 하중에 대하여 저항한 후, 핑거의 휨 및 전단 변형이 과도하게 발생되며 파단 현상이 발생할 가능성이 있을 것으로 추정된다. 반면에 내진 신축이음 실험체의 경우, 교축 직각방향의 하중에 대하여 하중에 대한 변형을 핑거의 힌지가 흡수하여 신축이음장치 및 상부구조에 응력을 발생시키지 않고 다만 하중 작용방향으로의 수평 변형만 발생시킬 것으로 예상된다.

국내 재배 엽맥섬유의 특성에 관한 연구 (Characteristics of the Leaf Fiber Plants Cultivated in Korea)

  • 이혜자;김남은;유혜자;한영숙
    • 한국의류학회지
    • /
    • 제33권5호
    • /
    • pp.711-720
    • /
    • 2009
  • Leaf fibers have many good properties; they are strong, long, cheap, abundant and bio-degradable. Since they, however, contain a great quantity of non-cellulose components, they have been used for the materials of mats, ropes, bags and nets rather than those of clothing. In this study, we investigated the characteristics of leaf fibers in order to promote the use of leaf fibers for the materials of clothing as well as develop the high value-added textile fibers. Leaf fiber plants including New Zealand Flax, Henequen and Banana plant, which have various nature and shape, were used. New Zealand Flax and Henequen leaves were cut from lower part of plants. Banana leaves and pseudo-stems were peeled and cut from the stem of Banana plants. First, the thin outer skins like film of leaves, veins and stems were removed before retting. The chemical retting had been processed for 1hour, at 100 in 0.4% $H_2SO_4$ aqueous solution(liquid ratio 50:1). Then, the retted leaf fibers had been soaked for 1hour, at room temperature in 0.5% NaClO solution(v/v) to remove the miscellaneous materials. We investigated the physical characteristics of three leaf fibers including the transversal and longitudinal morphology, the contents(%) of pectin, lignin and hemicellulose, the length and diameter of fibers, the tensile strength of the fiber bundles, and the fiber crystallinity and the moisture regain(%). The lengths of fiber from three leaf fibers were similar to their leaf lengths. The fiber bundles were composed of the cellulose paralleled to the fiber axis and the non-cellulose intersecting at right angle with the fiber axis. The diameters of New Zealand Flax, Henequen and Banana fibers were $25.13{\mu}m$, $18.16{\mu}m$ and $14.01{\mu}m$, respectively and their tensile strengths were 19.40 Mpa, 32.16 Mpa and 8.45 Mpa, respective. The non-cellulose contents of three leaf fibers were relatively as high as 40%. If the non-cellulose contents of leaf fibers might be controlled, leaf fibers could be used for the materials of textile fiber, non-wovens and Korean traditional paper, Hanjee.

낙동강 하구의 연안사주 지형변화 (A landform change of barrier islands around the Nakdong River Estuary)

  • 반용부
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2009년도 공동학술대회
    • /
    • pp.452-455
    • /
    • 2009
  • 낙동강 하구의 삼각주 전면에 연안사주지형의 발달이 급속하게 진행되고 있다. 이 연구는 고지도와 항공사진 등을 이용하여 낙동강 하구의 연안사주지형의 성장과 변화에 관하여 알아보았다. 낙동강 하구에는 여러 개의 연안사주들이 분포하고 있어 철새들의 서식지로도 널리 알려져 있다. 이들 연안사주들은 1861년 명호도를 시작으로 1904년 신호도, 진우도, 대마등, 1916년 을숙도, 장자도, 1955년 백합등, 1975년 새등(신자도)이 지형도상에 처음 등재되었다. 1986년에는 철새등(도요등)이 해수면상에 출현하였다. 2008년에는 철새등에서 다대포 해수욕장을 향하여 새로운 등이 성장하고 있어 다대포 해수욕장은 석호로 변하고 있고, 소형 어선들의 통항이 불가능하게 되고 있다. 낙동강 하구의 연안사주 군이 분포한 해역은 퇴적환경의 변화로 다대포-가덕도 사이의 바다가 육지로 바뀌게 될 것이다. 정부와 지방자치단체에서는 4대강 살리기, 대운하사업, 가덕도 근해에 신공항을 건설에 관심을 가지고 있어 이 방면에 대한 해안지형환경에 관한 세밀한 연구가 선행되어야 할 것이다.

  • PDF