• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.163-180
• /
• 2003

This paper aims at collecting the guantitative data of kenematic variables by analysing the gait patterns of the normal adult men and the handicapped. The gait motions were taped with 4 video cameras, the cinematographic analyses were performed by the DLT technique of three dimensional image treatment. The following results were obtained in the analysis of the variables: 1. The ratio of stance time and swing time did not show any significant difference in the groups of the normal men and the handicapped when both foot of the former and the right feet of the latter were compared. The stride peeriod time of these two groups were 1.12 and 1.11 second, respectively. 2. In the handicapped group, the step width was wider, the step length and stride length were shorter, and especially, the step length of the right foot was shorter, 3. The small vertical displacement of left toes of the handicapped group showed that the heal contact and the left midstance are almost simultaneous. 4. The two groups have almost the same horizontal displacement of the center of gravity and the same vertical rate of extension. In view of the velocity of the center of gravity the normal adults showed the constant speed of movement. However, the handicapped adults were reduced from the right midstance to the right toe-off. 5. The handicapped showed prominently low angle on the left toe-off in the ankle joint angle, they also had the tendency to walk in the patterns of extended knee in the knee joint angle. Both the handicapped and the normal had the hyperextension on the toe-off in the hip joint angle. In the back and front angle of body, both showed the slightly back-sided walking positions. 6. Both groups had the abduction of both feet in foot placement angle, but the handicapped did not show serious abduction of left midstance.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.65-74
• /
• 2003

The purpose of this study was to analyze kinematic variables in the badminton smash motion through 3-dimensional image analysis. The kinematic variables were velocity of joints in upper limbs, the angle of wrist in the impact, and the angular velocity of the top of racket head. The smash motions of four male badminton players in H University and four male students at department of the physical education in K University who were not majoring in badminton were analyzed kinematically and the attained conclusions were as follow. 1. The velocity of segments in upper limbs of the unskilled group was faster than that of the skilled group. The movement pattern was fast back swing-slow impact moment-fast fellow through in the unskilled group, but slow back swing-fast impact moment-slow follow through in the sullied group. 2. As the BS phases, the velocity of segment in right shoulder was different significantly between groups. Right elbow and right wrist segments, velocity of racket head was different significantly between groups(p<.05) by IP phases. As the FT phases, there was no significant difference. 3. The angle of right wrist at the impact, the angle of palm flexion and the angle of palm flexion in aspect were shown that the skilled group was higher than unskilled group. There was no significant difference. 4. The velocity of racket head was shown that the unskilled group has fast velocity, but the angle velocity was shown the unskilled group has slow. 5. The angle velocity of racket head in aspect were no significant difference between groups, but maximal angle velocity was different significantly between groups(p<.05).

• ETRI Journal
• /
• v.31 no.3
• /
• pp.271-281
• /
• 2009

This paper presents a novel multiband microstrip-fed right angle slot antenna design technique for multiple independent frequency bands. The new technique uses various slot sizes at various appropriate positions. We first propose a tri-band slot antenna consisting of three right angle slots. Then, a quad-band slot antenna is developed with four right angle slots which achieves slant ${\pm}45^{\circ}$ linear polarization, omnidirectional pattern coverage, good antenna gain, and acceptable impedance bandwidths over all the operating frequency range. Moreover, an open-circuited tuning stub is introduced to achieve good impedance matching. Both proposed antennas are designed on a ground plane of RT/duroid 5880 substrate with a thickness of 1.575 mm. The real measurable results show that the desired frequencies used in wireless communication systems, namely, WLAN and WiMax, are efficiently achieved.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.406-413
• /
• 2001

The current study depicts and experimental work of the impulsive wave discharged from the exit of several kinds of right-angle bend pipes, which are attached to the open end of a simple shock tube. The weak normal shock wave with Mach number from 1.02 to 1.20 is employed to obtain the impulsive wave propagating outside the exit of the pipe bends. The experimental data of the magnitude of the impulsive wave and its propagation directivity are analyzed to characterize the impulsive waves discharged from the right-angle bend pipes and compared with those from a straight pipe. The impulsive waves are visualized by a Schlieren optical system. A computation work using the two-dimensional, unsteady, compressible Euler equation is also carried out to represent the experimented impulsive waves. The results obtained show that a right-angle miter bend considerably reduces the magnitude of the impulsive wave and its directivity toward to the pipe axis, compared with the straight pipe. It is believed that the right angle miter bend pipe can play a role of passive control agianst the impulsive wave.

• The korean journal of orthodontics
• /
• v.11 no.1
• /
• pp.41-45
• /
• 1981

A girl aged 18 years and 1 month, had a Angle's Class III malocclusion, characterized by .anterior crossbite, anterior crowding, and constriction from right lower 2nd premolar to right lower 2nd molar. This patient underwent sealing and (equation omitted) extraction, and multibanded system was placed. After 14 months, anterior crossbite and crowding was corrected, an bothdental arches were improved. After 6 months from debanding, band space disappeared and any relapse was not detected.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.51-62
• /
• 2006

In assessing risks related to working posture, pictures of postures are taken from various directions, which can be a source of observation error. Joint postures of the neck, lower back, knee, shoulder, and elbow were taken from 7 different viewing angles and 19 observers estimated joint angles by observing the pictures in 2-dimensional display. The joint angles were also measured using an optoelectronic motion measurement system. The estimation error increased as the viewing angle varies from the right side of the human body, but the patterns differ according to which joint angles were being observed. Guidelines to increase the validity of observation of joint angles were presented based on the results. In general, it is recommended to maintain the viewing angle within 20 degrees from the right side of the human body, while different ranges of viewing angle are recommended for each joint angle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.23-29
• /
• 2011

In this study, a camber angle generating mechanism for front and rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Step steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle change of front and rear wheel. According to results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel of front and rear suspension should have the proper orientation for improving the handling performance, respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.285-290
• /
• 2011

Due to the ageing-related degradation in physical and cognitive abilities, the elderly have difficulty in car driving and this is related to the high rate of car accidents among them. This study investigated the kinematic characteristics of old drivers' steering in right turning at intersections by comparing with young drivers. Thirteen old(60~70) and thirteen young(20~30) drivers who participated in the experiment turned their cars right side at intersections in a driving simulator. As results, the completion time of right turning at intersection of old drivers was larger than that of young drivers. The speeds of vehicle at the beginning and ending point of the right turning area of old drivers were smaller than those of young drivers, and also the steering angle at the ending point of the turning area of the former was smaller than that of the latter. The normalized jerk of old driver's steering was significantly larger than that of young drivers. These results indicate that old drivers modify their steering movement repeatedly and take the driving strategy of avoiding risks due to their reduced physical capabilities.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.109-116
• /
• 1992

To determine the horizontal inclination of the condylar long axis without taking the submentovertex radiograph, the author studied the interrelation between the angle formed by the midsagittal plane and the mandibular angle and the horizontal inclination of the condylar long axis. In 56 subjects, the author measured the angle formed by the midsagittal plane and both mandibular angle using the modified Twirl Bow and the horizontal inclination of the both condylar long axis from submentovertex radiographs. The result were as follows: The mean value of the angle formed by the midsagittal plane and the mandibular angle was l8.50±1.48° in right side and 19.30±1.55° in left side. The mean value of the horizontal inclination of the condylar long axis was 19.25±7.56° in right side and 20.27±7.050 in left side. The interrelation of the two angles was represented as follows: y = 20.31-0.0094× (r = -0.482, p<0.01) in right side and y = 20.64-0.066×(r =-0.301, p<0.05) in left side (y; the horizontal inclination of the condylar long axis, x; the angle formed by the midsagittal plane and the mandibular angle).