• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.1-8
• /
• 1998

In order to solve the conflict problem between the ride comfort and the road holding, the optimal design of shock absorber that minimizes the r.m.s. of sprung mass vertical acceleration and pitch rate with the understeer characteristics constraints in the high speed stability is proposed. The design of experiments and the nonlinear optimization algorithm are used together to obtain the optimal design of shock absorber. The second order regression models of the input variables(front and rear damping coefficients) and the output variables (ride comfort index and road holding one) are obtained by the central composite design in the design of experiments. Then the optimal design of shock absorber can be systematically adjusted with applying the nonlinear optimization algorithm to the obtained second order regression model. The frequency response analysis of sprung mass acceleration and pitch rate shows the effectiveness of the proposed optimal design of shock absorber in the sprung mass resonance range with the understeer characteristics constraints.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.125-130
• /
• 2003

Korean High Speed Train (KHST) designed to operate at 350km/h has been tested on high speed line in JungBu site since it was developed in 2002. The dynamic performances of railway vehicle are generally stability, safety and ride comfort. The stability performance of KHST was proved that it is stable at 400Km/h through Roller Rig test. The safety and ride comfort need to be predicted the capability of it at 350km/h by the on-line test because KHST is testing at 300km/h up to now. Therefor, in this paper, the safety and ride comfort at 350km/h are predicted the performance using the acceleration results at 300kw/h and these results show that the KHST's dynamic performances are very good. Also, it illustrate the two cases occurred the abnormal vibration of KHST during some on-line tests. The first case is that the variation of vertical acceleration of wheel is analyzed when an abrasion occur on wheel. The second case is that the lateral acceleration of wheel, bogie and body are analyzed when the KHST is unstable at high speed. The occurrences of these special phenomena were due to the some faults of the suspension and braking systems and the faults were improved. In present, it is testing with safety.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.70-75
• /
• 2018

This paper describes an Integrate Dynamic Control system with Brake System (IDCB) for SUV vehicles. The system was developed to stabilize the lateral dynamics, maintain the steerability and improve the ride comfort on various roads. A fuzzy logic control method is used to design the IDCB. The performance of the IDCB is validated under different road and driving conditions. The results show that the IDCB tracks the reference yaw rate under all tested conditions; in addition, it reduces the body slip angle and roll angle. When a vehicle runs on a split-${\mu}$ road and a brake input is applied, the IDCB virtually eliminates the lateral dynamics. Thus, the IDCB improves the lateral stability, preserves the steerability and enhances the ride comfort of vehicles.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.589-594
• /
• 2010

철도에서 평면곡선과 종곡선의 경합은 승차감 및 열차의 주행안전성을 저해시키는 원인이 되며, 유지보수비용에도 큰 영향을 미친다. 그러나 철도노선 계획 시 지형조건 및 예기치 않은 환경적 요인에 의해 선형경합이 필요하게 될 경우가 발생된다. 본 연구에서는 종곡선과 평면곡선의 경합이 곡선부에서의 승차감 및 평면곡선의 최적선형조건에 미치는 영향을 파악하고자 하였다. 이를 위해 평면곡선과 종곡선이 경합하였을 경우와 경합하지 않고 평면선형만 있을 경우에 대한 최적캔트량 및 승차감을 비교분석 하였으며, 고속영역에서 선형 경합이 곡선선형조건과 승차감에 미치는 영향을 검토하였다. 그 결과 경합한 경우라도 보정캔트를 부설한다면 승차감 측면에서 평면선형만 부설한 경우와 유사한 조건이 될 수 있음을 알 수 있었다.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.51-55
• /
• 2002

This paper presents a systematic methodology and formulation for determining optimal strategies of multi-body dynamic systems, which is based on multi-body dynamics, design sensitivity, and optimization techniques, and is applicable to a wide variety of mechanical systems. The particular application discussed in this paper considers a vehicle model with four-wheel steeling capability, and the presented methodology determines an optimal steering angle ratio strategy for the vehicle. It is shown that such a strategy can improve the ride stability of the vehicle, during a variety of maneuvers, when compared against similar strategies obtained from linear and simplified vehicle models.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.18-25
• /
• 2002

This paper is to study a comparison of ride stabilities for the guideway vehicle between its three primary steering types; the front-rear wheel steering type, tile independent wheel steering and the front wheel steering. A numerical model were built to investigate various factors to have an influence on the vehicular stability. It was shown that dynamic stabilities of the three types were dependent on the steering gain ratio of front wheel steering to rear. The front-rear wheel steering type was more stable for the value of positive steering gains and the shorter distance between front axle and guide link showed better stabilities. On the contrary, the independent wheel steering was more stable for the value of negative gains and the longer distance between front axle and guide link showed better stabilities. Ride characteristics of he front wheel steering seemed to be found midway. Ride behaviors due to time delay from front steering to rear were very different from steering type to type.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.876-879
• /
• 1996

The vibration of an attractive magnetic levitation(Maglev) vehicle transportation system is caused by the irregularity of the guideway track and the performance of the suspensions of the Maglev system. It is essential for us to give attention to the secondary suspension of the vehicle system as it determines the ride quality. In order to improve the ride quality and running stability, active secondary suspensions have been developed and applied to the vibration problems. This paper analyzes the performance of the active secondary suspension which is applied to an attractive magnetic levitation vehicle system running on a rough track. The dynamics of the suspension system and the optimal control problems are studied. According to the transient and frequency response analyses to the track disturbance, the ride quality of an attractive Maglev vehicle has been improved by applying the designed LQR active controller, and it has been confirmed that this improvement was also influenced by the configuration of the system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1943-1950
• /
• 2010

Superimposition of horizontal and vertical curves may hamper the ride comfort and the running stability of train and largely affect the maintenance cost. However, in many cases, it's not easy to make a track plan because of the fixed points (bridge, tunnel, turnout, catenary system, etc.) to be avoided due to the geographic conditions or to be passed for utilization of existing structures. In this study, when the horizontal and vertical curves are superimposed, in order to optimize the horizontal curve in aspect of the ride comfort, the object function $P_{CT}$ was developed and verified by vehicle dynamic analysis. Also, the solution algorithm for simplified evaluation method was presented.

• 한국철도학회논문집
• /
• 제16권4호
• /
• pp.311-317
• /
• 2013

철도선형에서 종곡선과 평면선형의 경합은 차량의 주행안정성 뿐만 아니라 건설비에도 많은 영향을 끼칠 수 있다. 본 연구에서는 종곡선과 평면곡선의 다양한 경합조건별 차량의 주행안전성 및 승차감에 미치는 영향을 분석하였다. 그 결과 종곡선과 평면원곡선의 경합 뿐만 아니라 종곡선의 완화곡선상 경합, 그리고 완화곡선-원곡선 연결부상의 경합에서도 차량의 주행안전, 승차감 및 궤도작용력 기준을 모두 만족하는 것으로 나타남을 알 수 있었다.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.91-97
• /
• 2012

It is being accelerated to develop environment-friendly vehicles to solve problems on the energy and environment of earth. The electric driving motor commonly installed in these vehicles has the excellent control capability such as fast response and accurate generation to torque control command. Especially, in-wheel motor has the additional merit such as independently driving each wheel in vehicle. Recently, being developed various control algorithm to enhance the safety and stability of vehicle motion using actively the merits of in-wheel motor. In addition to that, being issued the possibility of enhancing the ride comfort and attitude of vehicle motion such as pitching and rolling. In this paper, investigate the theoretical relationship between the braking/driving force and the motion of sprung mass of vehicle and propose the control method to enhance the ride comfort and attitude of vehicle motion. The proposed control method is proved through the simulation with vehicle model provided by TruckSim software which is commercial one and specializes in vehicle dynamics.