• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.1-20
• /
• 2018

The aim of this study is the optimization of the parameters of interconnected Hydro-Pneumatic (HP) suspension system of a three-axle vehicle for ride comfort and handling. For HP suspension systems of equivalent vertical stiffness and damping characteristics, interconnected HP suspension systems increase roll and pitch stiffness and damping characteristics of the vehicle as compared to unconnected HP suspension systems. Thus, they result in improved handling and braking/acceleration performances of the vehicle. However, increased roll and pitch stiffness and damping characteristics also increase roll and pitch accelerations, which in turn result in degraded ride comfort performance. Therefore, in order to improve both ride comfort and vehicle handling performances simultaneously, an optimum parameter set of an interconnected HP suspension system is obtained through an optimization procedure. The objective function is formed as the sum of the weighted vertical accelerations according to ISO 2631. The roll angle, one of the important measures of vehicle handling and driving safety, is imposed as a constraint in the optimization study. Upper and lower parameter bounds are used in the optimization in order to get a physically realizable parameter set. Optimization procedure is implemented for a three-axle vehicle with unconnected and interconnected suspension systems separately. Optimization results show that interconnected HP suspension system results in improvements in both ride comfort and vehicle handling performance, as compared to the unconnected suspension system. As a result, interconnected HP suspension systems present a solution to the conflict between ride comfort and vehicle handling which is present in unconnected suspension systems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.171-180
• /
• 2000

This paper deals with the whole-body vibration and ride quality evaluation in the vertical direction. The responses of the floor, hip, back, and head in four subjects were measured for various seats when the floor was excited by random vibration with r.m.s of 1.2m/s2 in the vertical direction. In the transmissibility between the hip and floor, the fundamental mode is observed at 4.4 Hz. In the transmissibility between the head and floor, the fundamental mode at 4.4Hz and the second mode at 7.6Hz are observed. It is shown that the head motion is 41% larger than the hip motion and the response of female subject is larger than that of male subject. The response without backrest also was compared with that with backrest. From these human responses ride quality of five seats were evaluated by the ride value such as transfer ration having frequency weighting function is the statistical sense. It is observed that the seat having high damping property can reduce the most acceleration exposed to hip in the statistical sense for all ride valves, while the seat having different seat spring doesn't show statistical difference.

• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.469-479
• /
• 2018

The present research study utilizes a multi-objective optimization method for Pareto optimization of an eight-degree of freedom full vehicle vibration model, adopting a non-dominated sorting genetic algorithm II (NSGA-II). In this research, a full set of ride comfort as well as ride safety parameters are considered as objective functions. These objective functions are divided in to two groups (ride comfort group and ride safety group) where the ones in one group are in conflict with those in the other. Also, in this research, a special optimizing technique and combinational method consisting of weighted sum method and Pareto optimization are applied to transform Pareto double-objective optimization to Pareto full-objective optimization which can simultaneously minimize all objectives. Using this technique, the full set of ride parameters of three dimensional vehicle model are minimizing simultaneously. In derived Pareto front, unique trade-off design points can selected which are non-dominated solutions of optimizing the weighted sum comfort parameters versus weighted sum safety parameters. The comparison of the obtained results with those reported in the literature, demonstrates the distinction and comprehensiveness of the results arrived in the present study.

• Journal of Mechanical Science and Technology
• /
• v.19 no.7
• /
• pp.1469-1477
• /
• 2005

Vibrations related to ride comfort should be considered at the beginning of design stage. In general, ride comfort of human is mainly affected by vibration transmitted from the floor and seat. Also, vibration level is very important regarding with running safety on freight wagon. To ensure ride comfort for passenger coach and vibration level for freight wagon, tests had been repeated by different test procedures with several equipments. With different measuring and evaluations for these results, it took much time to evaluate test results. In this paper, a new evaluation procedure was developed combining several software for ride comfort and vibration level test on railway vehicles. In addition, this developed system is capable of ride comfort test and vibration test by a single integrated system that is capable of immediate reporting the test result. With this developed system, the comfort in a passenger coach and the vibration in a freight car were evaluated. And the simulation results from the proposed system are verified by a field test.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1204-1212
• /
• 2008

The vehicle simulation (flight simulator) in 1920's was the first in the virtual reality. With the development of precise optical and electromagnetic equipment, the virtual reality widened its application for other purposes than military one. Based on the realistic display technology, it is more and more common in the various areas such as entertainment, medical profession, learning, film, architectural design, tourism and etc. In 1989, Jaron Ranier was the first to use the terminology 'Virtual Reality'. With this term, all virtual projects could be classified in a single item. But even before the term was used, the virtual reality has been studied up to now. As a part of virtual reality, the human thirst for the impossible thing has led to the development of ride film. The ride film consists of the special technical elements as well as the psychological analysis of human being. The ultimate purpose of virtual reality is engrossment through interaction. Even though the real interaction requires interface, input sensor and reaction ability, the ride film is not an element of the typical interaction. The virtual reality is mostly defined in technical terms now. But in this study, we will analyze the concepts worked out by Professor Michael Haim who is called a philosopher in the cyberspace in aspect of experience-oriented definition. We will analyze the adaptability of virtual reality based on his concepts such as artificial reality/ interaction/ engrossment/ networked world/ remote display/ simulation/ onmon engrossment. And also, we aim to suggest the directions of developing the ride films for perfect engrossment and to draw optimized conclusion thereon. In this viewpoint, we consider that the study of ride film on which there were few case studies will contribute to level up the basic frameworks of IT technology and the digital image.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.233-240
• /
• 1998

In this study, ride sensitivity analysis of train with non-linear suspension elements is performed. Non-linear characteristics of springs and dampers for primary and secondary suspensions of a train is parameterized. Equation of motion of the train model is derived, and using the direct differentiation method, sensitivity equations are obtained. For a nominal ride quality performance index, sensitivity analysis with respect to various design parameters regarding non-linear suspension parameters is carried out.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.405-412
• /
• 1998

Recently“ride comfort”problem becomes increasingly important because of today's needs for train speedup The concept of term “riding comfort” is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But each of then recommends the different assessment method and the different guidance. So users must review whether they can apply it to their system or not. In this paper, we discuss the evaluation methods defined in the standards - ISO 2631, UIC 513 R, CEN DRAFT prENV 12299 and the ride index suggested by Sperling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2048-2055
• /
• 2001

This paper develops a computational model for estimating the ride quality of a cabover type large-sized truck in a double wheel bumpy ride test. The computational model is developed using ADAMS. To verify the developed model, an actual vehicle double wheel bumpy ride test is performed. In the test, the vehicle maintains a straight course with a constant velocity such that the front two wheels are passed the bump at the same time. The bump has the height of 60mm, and the width of 550mm. In the test, four velocities are used. They are 10kph, 20kph, 30kph and 40kph. Since the large-sized truck's center of gravity location is high, and its weight is heavy, it is a quite severe test condition to perform the test with more than 30kph velocity. In the test, vertical accelerations on the floor of the cab are measured. The measured accelerations are compared to the simulation results. From the comparison, it is shown that the developed model can predict not only the measured acceleration's tendency but also peak accelerations quite well. In this paper, the validated model is utilized to compare the ride quality between a vehicle with a multi-leaf spring and a vehicle with a tapered leaf spring in the front suspension system in a double bumpy ride test.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.151-156
• /
• 2008

This study was conducted to evaluate ride vibrations experienced by tractor operators during plowing, rotovating, and transporting operations in Korea. Field data of ride vibrations were taken at the operator-seat interface from 49 tractors and analyzed on the basis of ISO 2631-1 and EU Directive 2002/44. Of the measured ride vibrations 15.4% in the plowing and 12.5% in farm road transport exceeded the 8-hour fatigue decreased proficiency boundary in the fore and aft directions at frequencies from 1 to 5 Hz. 93.9% exceeded the 8-hour potential health risk of ISO 2631-1. The ride vibrations exceeding the 8-hour exposure limit were 38.5% in plowing, 31.6% in rotovating, 100% in farm road transport and 88.9% in concrete road transport. Although most tractor operators were not exposed to ride vibrations greater than the 8-hour exposure limit value (ELV) of EU Directive 2002/44, 7.7% of the operators in the plowing experienced greater vibrations than the ELV in the fore-aft direction. Farm road transport produced greater vibrations than any other operations. Concrete road transport, plowing and rotovating operations followed next. Limit criteria for ride vibration exposure differ depending upon the guidelines. Exposure limit of the health guidance caution zone of ISO 2631-1 is lowest among its kinds.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.393-400
• /
• 2014

In this study, an automatic transmission was developed for a bicycle. This transmission uses the pedal rpm and riding speed information for efficient riding. This transmission was installed on a bicycle using an internally geared hub. The automatic transmission was developed for a beginner to ride with proper gear changes. Indoor ride tests were performed to assess the performance of this transmission. Here, a 'beginner' is defined as a bicycle rider who can maintain a riding power of ~150W with a maximum heart rate of ~80%. Furthermore, 'ride with proper gear change' means that the rider could ride the bicycle while maintaining an efficient pedal rpm by the automatic transmission. One expert and four beginners participated in the ride test. The expert was chosen for the comparison with the beginners. To minimize environmental disturbances, the ride test was performed indoors. In this test, two types of gear changes manual and automatic were tested on two types of roads a road with a gradual incline of 0-3% and a road that simulates the bicycle road along the Han river in Seoul. The results of the ride tests show that the algorithm applied for the automatic transmission helps beginners to ride the bicycle efficiently.