• 한국의상디자인학회지
• /
• 제19권3호
• /
• pp.63-74
• /
• 2017

This study aims to contribute to the development of male incontinence underwear with an anti-aging effect that meets customer requirements by examining the types, sorts, sizes and specifications of male incontinence underwear currently sold on the market. The results of an analysis of a total of eight commercial products are as follows. 1) Among the samples, six types of incontinence underwear were of a pull-on style like regular underwear; two types were of a pad insertion style. With respect to the underwear design, four (50%) types of incontinence underwear were brief style. The rest were drawers (3, 37.5%). Only one was of a trunk (12.5%) style. 2) With respect to size, the percentage of Size 3 was 50%, followed by Size 4 (50%). Most of the size of the underwear uses hip measurement whereas Japanese products (3, 37.5 %) use waist circumference. 3) With respect to the materials of the incontinence underwear, natural fibers such as cotton were mostly used and a polyurethane or polyester was mixed to enhance the wearing sensation and stretchability of the underwear. Finally, for the structure of the pad area, a napping finish was the largest (3, 37.5%), single knit 2(25%), twill weave 2(25%), and rib weave 1.

• 수산해양교육연구
• /
• 제28권5호
• /
• pp.1470-1477
• /
• 2016

This study has designed and evaluated the safety of watertight damper for Offshore Rigs. The watertight damper is an improved design for conventional DN 350 butterfly valve. Numerical analysis has been performed to investigate the safety factor and seat leakage of the designed 3-type disk dampers. The structure analysis results present the deformations, the equivalent stresses and the safety factor. It was confirmed that the designed disk, rib-disk and streamlined disk of watertight damper are safe enough in maximum operating pressure of 0.98MPa. The results show that the disk damper had the smallest maximum deformations and stress among 3-type disk dampers and the safety factor was 4.3. Therefore it is confirmed that the disk damper has the most excellent strength. Also linear static structural analysis was individually conducted for disk and body. The results show that the maximum disk deformation was larger than the body deformation, Therefore the disk damper is causes no seat leakage.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.179-196
• /
• 2013

This research is about the mechanical properties of knit pullover of Shaping and WholeGarment according to structured patterns and form of the armhole. For the study 12 samples are prepared under different conditions and through comparative analysis of each sample's armhole around armpit in basic properties, tensile strength & elongation and residual elongation after repeated extensions, the conclusion is as follows. As a result of comparing basic properties of structured pattern of Shaping and WholeGarment samples, in all structured patterns Shaping samples weighed more. According to the comparative analysis of tensile strength & elongation of Shaping and WholeGarment samples, Machi on both sides of WholeGarment samples showed the highest strength. By comparing outcome of residual elongation by structured pattern of Shaping and WholeGarment samples, both types were observed to have the residual elongation increase in the order of Plain

• 한국가시화정보학회지
• /
• 제22권2호
• /
• pp.11-19
• /
• 2024

We performed numerical simulations on a C-type liquid hydrogen (LH2) storage tank for commercial vehicles to reduce evaporation rates by manipulating vortical structures. Owing to external heat, natural convection occurs inside the tank, leading to the enhanced evaporation of LH2. We observed that the regions of high magnitude vorticity correlate with those of high evaporation rates. Specifically, vortical structures in the side section area show higher vorticity magnitude and evaporation rates compared to those in the midsection area. To suppress these vortical motions, we installed an array of ribs at intervals corresponding to the mean diameter of the vortical structures. As a result, the area occupied by vortical structures in the side section area decreased, leading to a reduction in evaporation speed by approximately 2.3 times. This study elucidates the internal evaporation mechanism in storage tanks from the perspective of flow structures and potentially contributes to minimizing the boil-off rate in cryogenic storage tanks.

• 한국항공우주학회지
• /
• 제40권11호
• /
• pp.963-971
• /
• 2012

본 논문에서는 항공기 날개의 최적설계 툴을 개발하고, 다중하중스펙트럼 조건에서 항공기 날개의 구조부재에 대한 최적설계를 수행하였다. 공력하중을 계산하기 위해 2차원 CFD의 해석 결과를 사용하였다. 최적화 설계 변수는 리브 및 스파의 개수 및 위치와 두께를 선정하였다. 각각의 비행유형에 대한 순항속도에서의 공력해석 결과로 응력해석을 수행한 후, 피로하중 스펙트럼 임무선도를 활용하여 피로파손해석을 수행하였다. 다중하중 조건의 적용을 위해 손상누적법을 적용하였다. 응력해석에 이은 파손 해석을 포함하는 항공기 날개의 경량화를 진행하였다. 다변수 문제를 효과적으로 최적화하기 위해 PSO(Particle Swarm Optimization) 알고리즘을 사용하였다.

• 복식
• /
• 제62권4호
• /
• pp.91-106
• /
• 2012

The purpose of this study was to offer some directions for the design of men's knitwear and provide basic data helpful for design conception and product development for creative and unique men's knitwear. As for the methodology, the investigator examined the works of these following ten designers that consistently participated in the men's Milano Collection for the last ten years from 2001 S/S to 2010 F/W: Burberry Prorsum, Costume National, D & G, D squared, Dolce & Gabbana, Giorgio Armani, Gucci, Iceberg, Prada, and Vivien Westwood. We identified the design elements expressed in knitwear, categorized examples for each element, and reviewed their characteristics. The results of this study are as follows. The designers usually adopted the H-silhouette with some room until 2006, after which the slim tubular silhouette became prevalent. Most of the designers made knitwear with normal yarn and expressed them by dyeing or printing regardless of seasons, which meant the usage level of fancy yarn was low. The much usage of the basic pattern was particularly salient. The most popular basic structure was plain, which was followed by rib and color pattern, which included the jacquard and intarsia pattern. The designers presented thick outer items made of thick yarn for F/W seasons and many thin inner items made of thin yarn for S/S seasons. The popular colors were brown from the Red Group(R) and beige from the Orange Group (YR) regardless of seasons. When achromatic colors were used a lot, there was a development of various grey shades. For the most used basic structure, plain, the designers employed such technical methods as printing, pleat treatment, and dyeing in high frequency.

• Composites Research
• /
• 제30권6호
• /
• pp.331-337
• /
• 2017

복합재 격자 구조물은 무게가 가볍고 비강성, 비강도가 높다는 장점이 있으며 주로 압축 하중이 작용하는 발사체구조에 적용된다. 그러나 필라멘트 와인딩 기법으로 제작되므로 섬유가 겹쳐지는 부분에서 기공과 결함이 발생하게 된다. 설계 하중 도출을 위한 해석 모델 검증을 위해 구조물의 강성, 강도 확인이 필요하지만 Full scale 시험의 경우 시간, 공간상의 제약이 따르며 구조물의 형상이 복잡하므로 시험에 어려움이 많다. 따라서 강성 확인을 위한 Subelement 단위의 시험법이 필요하다. 본 논문에서는 복합재 격자 구조물을 단위격자구조로 가공하였으며 각각 압축, 굽힘 시험을 수행하여 나선 리브, 원주 리브의 강성을 확인하였다. 휘임, 비틀림 형상을 가진 원통형 복합재 격자 구조물의 강성 평가를 위한 압축, 굽힘 시험법을 제안하였으며 유한요소해석을 수행하여 시험결과와 비교하였다.

• 한국항공우주학회지
• /
• 제30권6호
• /
• pp.107-115
• /
• 2002

본 연구에서는 다중스파 항공기 날개 구조물의 유한요소 이상화 방법이 날개의 내력분포, 치수 및 중량에 어떠한 영향을 미치는지를 살펴보았다. 구조물의 유한요소 이상화 방법에 따라 총 18가지의 날개 모델을 구축하고 4가지의 외부하중 조건을 적용하였다. MSC/NASTRAN과 MSC/PATRAN을 이용하여 모든 구조물이 주어진 하중조건 모두에 대해 허용치 이내의 응력과, 가공을 위한 최소치 이상의 치수를 가지도록 하는 알고리즘을 별도로 개발하였다. 해석결과 날개의 내력분포와 예상중략에 가장 큰 영향을 미치는 것은 외피이고, 스파나 립의 이상화 방법의 효과는 상대적으로 작은 것으로 나타났다. 일반적인 예상과는 달리 굽힘강성을 가진 요소들을 사용한 모델이, 굽힘응력의 효과로 인해, 굽힘강성이 없는 요소를 사용한 모델에 비해 더 큰 예상중량을 보이는 것을 알 수 있었다. 본 연구의 결과로부터, 설계자는 가능하면 모든 구조물의 굽힘강성을 고려한 해석을 수행하거나 그렇지 못할 경우 각 구조물의 특성에 대한 신중한 사전 검토를 거칠 것을 권장한다.

• 건축역사연구
• /
• 제21권5호
• /
• pp.19-32
• /
• 2012

The purpose of this paper is a study on the dome plan of S. M. del Fiore Church of F. Brunelleschi. The results of study are as follows: 1. The planning of floor, elevation and cross section plan of S. M. del Fiore church is basically planned by each other correlation. In particular, the octangular form of geometrical standard which is formed with altar as the center at the crossing part is important component elements which is decided by not only the dome, but form and size of the drum and floor plan form of the lantern 2. The dome which has been planned by F. Brunelleshi has completed the new dome, preserving gothic thought intended by the church plan after study on architecture of ancient Rome with Pantheon. And the dome which is a main space of church through all aspects of plan, structure, function and construction about the dome is a opportunity in the beginning of Renaissance architecture which is a new epoch and a turning point of architecture on various point of view. 3. The dome which is constructed by F. Brunelleshi has been planned through the innovative solution by the refusal of traditional semicircle form dome, centering use and creation double-shell structure form for the first time in history. And the construction of dome has been solved with the invention of various construction equipments and machineries, the stone rib planned for connection and reinforcement about shells of the octangular form, the support method for reduction the gravity of bricklayers work and the brick work of nock-patterned shape which is masonry construction method of the architecture of ancient Rome.

• Composites Research
• /
• 제34권2호
• /
• pp.129-135
• /
• 2021

본 논문에서는 필라멘트 와인딩 공정에서 발생하는 두께 방향 섬유체적비 불균일이 원통형 복합재 격자 구조의 좌굴하중에 미치는 영향을 확인하기 위해서 Vasiliev가 제안한 원통형 복합재 격자 구조 좌굴하중 이론식을 변형하여 섬유체적비에 따른 좌굴하중 저하를 확인하였다. 섬유체적비에 따라 격자 구조 리브의 각 층의 두께를 달리하였으며, 혼합법칙을 사용하여 각 층별로 물성치를 다르게 적용하였다. 구조물 크기, 두께, 섬유체적비 평균값을 달리한 유한요소모델에 대한 선형좌굴해석을 수행하였다. 최종적으로 이론식을 사용한 등가모델의 좌굴 하중 계산 결과와 유한요소해석 결과를 비교하여 두께 방향 섬유체적비 불균일이 원통형 복합재 격자 구조의 좌굴하중 저하의 원인이 될 수 있음을 확인하였다.