• 대한관절경학회지
• /
• 제13권2호
• /
• pp.119-125
• /
• 2009

회전근 개 재파열에서 재봉합의 일차적 목적은 동통의 완화와 기능의 회복에 있다. 따라서 재봉합을 위한 적응증은 동통이 주된 증상으로 근력 약화를 동반한 기능적 결손이 있는 경우가 가장 적절하다. 회전근 개 재봉합 시 고려해야 할 중요한 요소로는 파열 건의 상태이며 특히 건 결손의 크기, 근 위축, 지방 변성 그리고 건의 퇴축 정도를 충분히 고려하여 재봉합이 가능한 지를 판단하여야 한다. 회전근 개의 재봉합술은 점액낭의 반흔과 건의 퇴축이 존재하고, 재파열된 회전근개가 대범위 이상의 파열이 많기 때문에 재봉합하기가 어려우며, 파열이 보통 오랜 기간 동안 존재하고 근-건의 질이 불량하기 때문에 술기상 어렵고 결과도 비교적 만족스럽지 않다. 이에 저자는 회전근 개 봉합술 후 재수술에 대해 문헌 고찰과 함께 저자의 경험을 논의하고자 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.322-330
• /
• 2014

New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.48-55
• /
• 2010

반도체 설계기술의 발달로 구현 회로가 복잡해지고, 동작속도가 크게 증가함에 따라, 반도체 이후 (post-silicon) 설계 단계에서 repair를 위한 기간 및 비용이 크게 증가하고 있다. 본 논문에서는 예비 셀을 이용한 repair 방법을 통해 설계 오류로 인한 repair시 혹은 설계 변경 시에 전체 재설계를 최소화하는 방법을 제안하였다. 또한 예비 셀을 이용한 설계 변경 과정에서 repair layer에 설계 변경을 국한하여 mask 비용과 time-to-market을 줄이는 방법을 개발하였다. 또한 회로 분할을 통해 repair 과정에서 사용하는 예비회로의 비용을 줄일 수 있도록 한다.

• 건축역사연구
• /
• 제32권5호
• /
• pp.43-50
• /
• 2023

Ondol is a traditional underfloor heating system designated as a national intangible cultural heritage of Korea. The Cultural Heritage Administration (CHA) publishes a standard specification for the repair of cultural properties, including ondol. This standard specification is used as a guide for contractors who repair ondol in the field. However, the standard specification for ondol repair has some errors and is difficult to understand in the field. This paper proposes a revision of the standard specification for ondol repair. This study found that the standard specification for ondol repair has some problems in terms of the terminology and structure of ondol. These problems were sufficient to confuse ondol repairers in the field. Therefore, this study proposes to revise the standard specification to correct these errors and make it easier for ondol repairers in the field to understand. This study is expected to help recognize and preserve ondol as a cultural property and not just as a building.

• 대한족부족관절학회지
• /
• 제10권2호
• /
• pp.259-263
• /
• 2006

The acute Achilles tendon rupture usually occurs to the people who participate in sports-related activities between 30 and 40 years of age. Recently surgical repair is the standard treatment in acute Achilles tendon rupture. After the Achilles tendon rupture in the left ankle, a 30-years old young man had been suffered from re-rupturing within three months after the primary repair. 2 years later, right-side Achilles tendon was reruptured after primary repair consequently. In the revision surgery, we performed V-Y advancement of the gastrocnemius-soleus fascia and reinforcement of the semitendinosus tendon. None of the English-literature was reported about using the semitendinosus tendon in revision surgery of the Achilles tendon retear previously. Therefore, we report this case and surgical technique because of the simple technique and the excellent results.

• 대한관절경학회지
• /
• 제10권1호
• /
• pp.17-22
• /
• 2006

• International Journal of Reliability and Applications
• /
• 제12권1호
• /
• pp.41-48
• /
• 2011

This paper considers the maintenance model suggested by Jung and Park (2010) to adopt the Bayesian approach and obtain an optimal replacement policy following the expiration of NFRRW. As the criteria to determine the optimal maintenance period, we use the expected cost during the life cycle of the system. When the failure times are assumed to follow a Weibull distribution with unknown parameters, we propose an optimal maintenance policy based on the Bayesian approach. Also, we describe the revision of uncertainty about parameters in the light of data observed. Some numerical examples are presented for illustrative purpose.

• Clinics in Shoulder and Elbow
• /
• 제19권1호
• /
• pp.51-58
• /
• 2016

The arthroscopic rotator cuff repair is now considered a mainstream technique with highly satisfactory clinical results. However, concerns remain regarding healing failures for large and massive tears and high revision rate. In recent decades, various repair strategies and construct configurations have been developed for rotator cuff repair with the understanding that many factors contribute to the structural integrity of the repaired construct. The focus of biomechanical test in arthroscopic repair has been on increasing fixation strength and restoration of the footprint contact characteristics to provide early rehabilitation and improve healing. These include repaired rotator cuff tendon-footprint motion, increased tendon-footprint contact area and pressure, and tissue quality of tendon and bone. Recent studies have shown that a transosseous tunnel technique provides improved contact area and pressure between rotator cuff tendon and insertion footprint, and the technique of using double rows of suture anchors to recreate the native footprint attachment has been recently described. The transosseous equivalent suture bridge technique has the highest contact pressure and fixation force. In this review, the biomechanical tests about repair techniques of rotator cuff tear will be reviewed and discussed.

• 대한관절경학회지
• /
• 제13권2호
• /
• pp.115-118
• /
• 2009

• 대한구순구개열학회지
• /
• 제12권2호
• /
• pp.95-100
• /
• 2009

In spite of all fine methods developed for treating cleft lip, a certain percentage of cases might still need secondary correction. Generally, secondary revision of cleft lip is much difficult to produce esthetic outcome, because the cleft lip scar gives a variable symmetrical and anatomic defect that may not be possible to make inconspicuous of this scar and rebuild good esthetics. In this case report, a five year-old girl was underwent secondary cleft lip repair using straight line technique to correct unfavorable postoperative scar, peaking of Cupid's bow, notching of vermillion and shortened lip on cleft side with simultaneous repairing cleft palatal fistula. After operation, the secondary deformity was much improved, but, long term follow up is needed to evaluate the additional postoperative deformity might be happen during growth.