• Korean Journal of Adult Nursing
• /
• v.27 no.6
• /
• pp.624-633
• /
• 2015

Purpose: This study was to develop and test a theoretical model based on the revised health belief model explaining osteoporosis prevention behaviors among postmenopausal women under 65. Methods: This secondary data analysis included 342 postmenopausal women under 65 from original data sources of a total of 734 women. The measured instruments were scales for osteoporosis awareness, osteoporosis health belief scale (benefit, barrier, susceptibility, severity, and health motivation), self-efficacy, and osteoporosis prevention behaviors. Data were analyzed using SPSS/WIN 20.0 and AMOS 20.0. Results: The mean age of the subjects was 55.2 years and the mean age of menopause was 51.10. The hypothetical model of osteoporosis prevention behaviors was relatively fit. Osteoporosis prevention behaviors were significantly explained up to 62% by expectation factors (relative benefit, self-efficacy, health motivation) and modifying factors(knowledge only). Expectation factors of health belief had a mediation effect between modifying factors and prevention behaviors. Conclusion: This study partially supported the revised health belief model for explaining osteoporosis prevention behaviors. It provides a basis for developing an educational program focusing on expectation factors and knowledge with the aim of behavioral changes for osteoporosis prevention.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.53-66
• /
• 2000

This paper proposes a simple numerical model for use in a finite analysis (FEA) of scaffold-shoring systems. The structural model consists of a single set of multiple-story scaffolds with constraints in the out-of-plane direction at every connection joint between stories. Although this model has only two dimensions (termed the 2-D model), it is derived from the analysis of a complete scaffold-shoring system and represents the structural behavior of a complete three-dimensional system. Experimental testing of scaffolds up to three stories in height conducted in the laboratory, along with an outdoor test of a five-story scaffold system, were used to validate the 2-D model. Both failure modes and critical loads were compared. In the comparison of failure modes, the computational results agree very well with the test results. However, in the comparison of critical loads, computational results were consistently somewhat greater than test results. The decreasing trends of critical loads with number of stories in both the test and simulation results were similar. After investigations to explain the differences between the computationally and experimentally determined critical loads, it was recommended that the 2-D model be used as the numerical model in subsequent analysis. In addition, the computational critical loads were calibrated and revised in accordance with the experimental critical loads, and the revised critical loads were then used as load-carrying capacities for scaffold-shoring systems for any number of stories. Finally, a simple procedure is suggested for determining load-carrying capacities of scaffold-shoring systems of heights other than those considered in this study.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.207-215
• /
• 2015

Safety' can be used in a variety of ways and may also have different meanings when used in theoretical field and routinely used. In this paper, the 'safety' means that human injury, fire or physical accident condition does not occur while used by the end-user. The meaning of safety may be different by era and culture. Even in contemporary era, the meaning can be used differently by country, region and culture. As the rights of consumers are increasingly reinforced, we can expect the acceptable risk or safety level can rise higher. In this paper, the R-map of Japan and the European risk assessment guidelines (RAPEX) were reviewed considering domestic incidents database status and its applicability. Because it is difficult to make a model based on a R-map, a revised model was developed mainly based on European Assessment Model with a combination of the important characteristics of Japan model R-map. Also utilizing this revised model, the availability as a new risk assessment model was confirmed by comparing the test results for the same scenarios to the other risk assessment model (RAPEX/RAG).

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.6
• /
• pp.763-780
• /
• 2012

The purpose of this study was to develop the teaching & learning model to increase the key competencies in the university. For this, the researcher suggested the draft of teaching & learning model in the university based on literature analysis and survey for key competencies education to professors and students. After that, the draft of the model was revised through the formative test by experts. And then, the revised model was verified through delphi survey and a final model was fixed. As the result of this study, features of the final model are as follows. First, this study identified that a core values of teaching and learning model for the key competencies education in the university is reinforcement of learner's thinking skills and enhancement of field oriented on learning contents and reinforcement of professor's role as a mentor, a facilitator, a motivator, and an informant. Second, The core learning activity's process of the teaching and learning model for the key competencies education in the university consists of the following in order: team-building, exploring problem, gathering and analysing informations, arranging of leaning outcomes, comprehensive arrangement and self-examination.

• Journal of Information Technology Services
• /
• v.12 no.2
• /
• pp.373-386
• /
• 2013

The purpose of this research is to develop a model for efficient service R&D investment in government budgeting process. It is necessary to develop an efficient and effective investment model to improve competitiveness of the service industry and national economy. Various existing types of service R&D classification have been reviewed. And object-oriented service R&D request classification types have been derived. A tentative model for evaluating service R&D requests have been developed through extensive discussions on effective methodologies. The model has been refined and revised by four service budgeting experts. The revised and refined checklists and guidelines have been used for 40 real service R&D requests evaluations. As a result, a full model for service R&D evaluation and budgeting has been proved to be useful. Also, a need for more efficient and concise evaluation model has been raised through this evaluation process. A brief model with only 10 checklists has been developed and its usefulness has been proven by pilot test with 10 real service R&D requests. The results of this study can be used for evaluation of service R&D proposals and effective budgeting of R&D requests for improving global competitiveness. Further research is needed for refining the developed evaluation models.

• Korean Journal of Adult Nursing
• /
• v.13 no.2
• /
• pp.277-290
• /
• 2001

This study was conducted to examine if the revised HPM was appropriate to explain smoking quitting behavior. A convenience sample of 400 college students enrolled in the universities located in Seoul and Kyunggi-Inchon province was selected. According to the study results, smoking-specific cognitions and affect included in the study could significantly explain commitment to a plan to quit smoking which was one of the behavioral outcomes in the revised HPM. The study result showed that among predictors, smoking-related affect, perceived benefit of quitting smoking, and perceived self-efficacy significantly explained commitment to a plan to quit smoking, but perceived barriers and interpersonal influences did not. The model for smoking quitting behavior formulated with smoking-specific cognitions and affect was statistically significant and the model explained 48 percent of variance in smoking quitting behavior. More specifically, it was shown that among smoking-specific cognitions and affect, only smoking-related affect, interpersonal influences, and perceived self-efficacy were the significant predictors to explain smoking quitting behavior. Smoking-related affect was the most important variable to explain smoking quitting behavior, followed by perceived self-efficacy. However, the influence of commitment to a plan to quit smoking on smoking quitting behavior was not statistically significant. Lastly, the model for smoking quitting behavior formulated with individual characteristics and experiences could explain 13 percent of the variance in behavior to quit smoking. Although the model is statistically significant, only the number of quitting attempts had significant and direct influence on behavior to quit smoking, while the remaining variables did not.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.2
• /
• pp.163-175
• /
• 2016

This paper presents a revised procedure for computation of double-K fracture parameters of concrete split-tension cube specimen using weight function of the centrally cracked plate of finite strip with a finite width. This is an improvement over the previous work of the authors in which the determination of double-K fracture parameters of concrete for split-tension cube test using weight function of the centrally cracked plate of infinite strip with a finite width was presented. In a recent research, it was pointed out that there are great differences between a finite strip and an infinite strip regarding their weight function and the solution of infinite strip can be utilized in the split-tension specimens when the notch size is very small. In the present work, improved version of LEFM formulas for stress intensity factor, crack mouth opening displacement and crack opening displacement profile presented in the recent research work are incorporated. The results of the double-K fracture parameters obtained using revised procedure and the previous work of the authors is compared. The double-K fracture parameters of split-tension cube specimen are also compared with those obtained for standard three point bend test specimen. The input data required for determining double-K fracture parameters for both the specimen geometries for laboratory size specimens are obtained using well known version of the Fictitious Crack Model.

• Management & Information Systems Review
• /
• v.18
• /
• pp.41-67
• /
• 2006

Value Creation issue for customers is emerging from the college education. Most colleges are facing to cope with over-supplied education facility problems against reducing population to apply to enter universities/colleges. The best way to overcome those problems might be to implement the Customer Satisfaction Management Strategy as if they were private firms for making profit. The main purpose in this study is to provide guidelines for CS strategy with a private college. It is focused on designing research plans and searching CS index. The process of this study is as follows; - Introduced the value creation strategy for customers with private colleges. - Proposed the CS management which is very important for enhancing competitive power - Evaluate various models to measure service quality and CSI for college service. - Provided some guidelines to research design of CS according to 6 customer categories. - Proposed some methodologies to apply a service quality measurement model. - Suggested a revised model from SERVPERF to adapt with college customers satisfaction. The result from this study showed that Customer Satisfaction Management would be the most important strategy to cope with confronting difficulties for private college and the revised model from SERVPERF would be an alternative solution. Further study is essential to assure the suggested model is valuable for private colleges because empirical test has not completed yet.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1241-1250
• /
• 1996

The characteristics of fatigue cumulative damage and fatigue life of 8-harness satin woven CFRP composites with a circular hole under constant amplitude and 2-level block loading are estimated by Stochastic Makov chain model. It is found in this study that the fatigue damage accumulation behavior is very random and the fatigue damage is accumulated as two regions under constant amplitude fatigue loading. In constant amplitude fatigue loading the predicted mean number of cycles to a specified damage state by Markov chain model shows a good agreement with the test result. The predicted distribution of the fatigue cumulative damage by Markov chain model is similar to the test result. The fatigue life predictions under 2-level block loading by Markov chain model revised are good fitted to the test result more than by 2-parameter Weibull distribution function using percent failure rule.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.41-50
• /
• 2019

Digital models for a cable-stayed bridge are defined considering data-driven engineering from design to construction. Algorithms for digital object generation of each component of the cable-stayed bridge were developed. Using these algorithms, Level-3 BIM practices can be realized from design stages. Based on previous practices, digital object library can be accumulated. Basic digital models are modified according to given design conditions by a designer. Once design models are planned, various applications using the models are linked the models such as estimation, drawings and mechanical properties. Federated bridge models are delivered to construction stages. In construction stage, the models can be efficiently revised according to the changed situations during construction phases. In this paper, measured coordinates are imported to the model generation algorithms and revised models are obtained. Augmented reality devices and their applications are proposed. AR simulations in construction site and in office condition are tested. From this pilot test of digital models, it can be said that Level-3 BIM practices can be realized by using in-house modeling algorithms according to different purposes.