• IE interfaces
• /
• v.12 no.2
• /
• pp.205-209
• /
• 1999

In reverse engineering area, the reconstruction of surfaces from scanned or digitized data is being developed, but geometric model of existing objects is not available in industries. This paper presents the new approach to the reconstruction of surface technique. A proposed methodology finds base geometry and blends surface between them. Each based geometry is divided by tri-angular patches which are compared with their normal vector for face grouping. Each group is categorized analytical surface such as a part of cylinder, sphere and cone, and plane shapes to represent the based geometry surface. And then, each based geometry surface is implemented to the infinitive surface. Infinitive surface's intersections are trimmed by boundary representation model reconstruction. This method has several benefits such as time efficiency and automatic functional modeling system in reverse engineering. Especially, it can be directly applied 3D fax and 3D copier.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.367-376
• /
• 2021

An increasing number of reverse total shoulder arthroplasty procedures has been performed since its introduction to South Korea in 2007. This review discusses the biomechanical rationale behind the development of reverse total shoulder arthroplasty and its outcomes over time. In addition, this paper mentions ways to minimize the risk of complications that may occur and how to manage those complications.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.851-857
• /
• 2011

This study was conducted to develop a real time reverse transcriptase-PCR (RT-PCR) method for the detection of viable Enterobacteriaceae in milk using primers based on the genes of ribosomal proteins S11 and S13 and to determine effects of heating and subsequent treatments on the threshold cycle (Ct) of the real time RT-PCR. Total RNA was isolated from 17 strains of bacteria including 11 strains of Enterobacteriaceae suspended in milk using a modified Tri reagent method. SYBR Green Master Mix was added to the RNA and the mixture was subjected to the real time RT-PCR. The Cts of eleven type strains of the Enterobacteriaceae in milk ($10^7$ cells) in the real time RT-PCR ranged from 21.5 to 24.6. However, the Cts of Pseudomonas fluorescens, Acinetobacter calcoaceticus, and three gram-positive bacteria were more than 40. The real time RT-PCR detected as low as $10^3$ cells in agarose gel electrophoresis. The Cts increased from 22.0 to 34.2 when milk samples contaminated with Escherichia coli ($10^7$ cells/mL) were heated at $65^{\circ}C$ for 30 min. In addition, subsequent incubation at $37^{\circ}C$ for 6 and 24 h increased the Cts further up to 36.2 and 37.2, respectively. Addition of RNase A to the bacterial suspension obtained from the heated milk and subsequent incubation at $37^{\circ}C$ for 1 h increased the Cts to more than 40. The results of this study suggests that pretreatment of bacterial cells heated in milk with RNase A before RNA extraction might enhance the ability to differentiate between viable and dead bacteria using real time RT-PCR.

• Journal of Trauma and Injury
• /
• v.23 no.1
• /
• pp.1-5
• /
• 2010

Purpose: To investigate the results of treatment of reverse oblique trochanteric fractures with compression hip screw. Methods: We reviewed the results of 12 cases of reverse oblique trochanteric fracture treated with compression hip screw from January 2000 to December 2006 which could be followed up for more than 1 year. The mean follow up period was 26 months (15~40). The mean age was 48 years old. Injury mechanism was composed of 6 cases of traffic accident and 6 cases of fall down. 8 persons were man. We investigated the union time, degree of neck-shaft angle change, amount of sliding of compression hip screw, complications, functional and clinical results. Results: 10 cases were united and the mean union time were 5 months (3~8). The mean neck-shaft angle change was 3.5 degrees (0~12). The amount of sliding of compression hip screw was 8.9 mm (2~24). There were six coxa vara, six leg due to coxa vara shortening, two nonunion, and one superficial infection. Unsatisfactory results of Jensen's social function score and Parker and Palmer's mobility score were studied. Conclusion: The results of treatment of reverse oblique trochanteric fractures with compression hip screw were relatively unsatisfied.

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.345-351
• /
• 2012

Background Cranial base defects are challenging to reconstruct without serious complications. Although free tissue transfer has been used widely and efficiently, it still has the limitation of requiring a long operation time along with the burden of microanastomosis and donor site morbidity. We propose using a reverse temporalis muscle flap and calvarial bone graft as an alternative option to a free flap for anterior cranial base reconstruction. Methods Between April 2009 and February 2012, cranial base reconstructions using an autologous calvarial split bone graft combined with a reverse temporalis muscle flap were performed in five patients. Medical records were retrospectively analyzed and postoperative computed tomography scans, magnetic resonance imaging, and angiography findings were examined to evaluate graft survival and flap viability. Results The mean follow-up period was 11.8 months and the mean operation time for reconstruction was $8.4{\pm}3.36$ hours. The defects involved the anterior cranial base, including the orbital roof and the frontal and ethmoidal sinus. All reconstructions were successful. Viable flap vascularity and bone survival were observed. There were no serious complications except for acceptable donor site depressions, which were easily corrected with minor procedures. Conclusions The reverse temporalis muscle flap could provide sufficient bulkiness to fill dead space and sufficient vascularity to endure infection. The calvarial bone graft provides a rigid framework, which is critical for maintaining the cranial base structure. Combined anterior cranial base reconstruction with a reverse temporalis muscle flap and calvarial bone graft could be a viable alternative to free tissue transfer.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.3
• /
• pp.405-413
• /
• 2024

Several techniques for determining the reverse peak current from a cyclic voltammogram (CV) for a reversible system are described in the literature: CV itself as a baseline with long switching potential (E_λ) that serves as a baseline for other CVs, Nicholson equation that uses CV parameters to calculation reverse peak current and linear extrapolation of the current obtained at the switching potential. All methods either present experimental difficulties or large errors in the peak current determination. The paper demonstrates, both theoretically and experimentally, that trapezoidal cyclic voltammetry (TCV) can be used as a baseline to determine anodic peak current (i_ap) with high accuracy and with a switching potential shorter than that used by CV, as long as E_λ is at least 130 mV away from the cathodic peak. Beyond this value of switching potential the electroactive specie is completely depleted from the electrode surface. Using TCV with E_λ = 0.34 V and a switching time (t_λ) of 240 s as a baseline, the determination of the reverse peak current presents a deviation from the expected value of less than 1% for most of the CVs studied (except cases when E_λ is close to the direct potential peak). This result presents better accuracy than the Nicholson equation and the linear extrapolation of the current measured at the switching potential, in addition to presenting a smaller error than that obtained in the acquisition of the experimental current. Furthermore, determining the reverse peak current by extrapolating the linear fit of i_ap vs. ${\sqrt[1/]{t_{\lambda}}}$ to infinite time gave a reasonable approximation to the expected value. Experiments with aqueous potassium hexacyanoferrate (II) and ferrocene in acetonitrile confirmed the theoretical predictions.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.46-53
• /
• 2002

Purpose: We would introduce the reverse superficial sural artery flap to reconstruct soft tissue defect on lower leg, ankle, and hind-foot. Materials and Method: From October 1998 to December 2001, we reconstructed 12cases (l2patients) of soft tissue defect around the hind - foot, ankle, and distal lower extremity with the reverse sural artery flap. Results: The time for flap dissection was 28 minutes in average. The size of the flap was from $4\times3cm$ to $14\times10cm$. All flaps survived. Conclusion: The reverse superficial sural artery flap is the useful technique for the soft tissue defect in the lower leg and the foot.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.3-11
• /
• 2014

Recently, remodeling construction project has been prevalently conducted in major city areas in Korea. However, remodeling construction project has a difficulty in conducting a construction because of non-existing drawing or lack of drawing information. To solve these problems, modeling techniques by using reverse engineering have been widely studied in other industries such as aerospace and automobile industry. But reverse engineering techniques have not been used in remodeling construction projects because those technology haven't supplied less accuracy during required time for surveying. So, this study suggests optimal method of acquiring accurate 3D laser scanner information for reverse engineering at interior remodeling project.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.295-302
• /
• 2010

Electro-hydraulic transmission (HST) and an electronic control system was designed, and performance of the components were investigated through indoor tests. When input values for HST swash plate control were given at 3 levels (5, 10, 13 degrees) in forward and reverse directions, the errors were less than 0.6 degrees. Response time was in ranges of 0.14 ~ 0.16 s and 0.16 ~ 0.2 s for forward and reverse direction controls while driving, and the values were 0.23 ~ 0.25 s and 0.18 ~ 0.23 s at static condition, respectively. Similar experiments for left and right steering resulted errors less than 0.5 degrees. Resonse time was in ranges of 0.16 ~ 0.22 s and 0.11 ~ 0.23 s for left and right turns while driving, and the values were 0.07 ~ 0.21 s and 0.09 ~ 0.14 s at static condition, respectively. From frequency response experiments, control system appeared to follow sine waves appropriately at frequencies less than 0.8 Hz with gain of 0.11 dB and 0.09 dB for forward and reverse direction controls, respectively, and the gain decreased above the frequency. Phase difference showed a gradual increase and were less than 45 degree up to 0.8 Hz. Similar experiments for left and right streering showed that the control system appeared to follow sine waves appropriately at frequencies less than 0.8 Hz with gain of 0.28 dB and 0.26 dB for left and right steering controls, respectively, and the gain decreased above the frequency. Phase difference showed a gradual increase and were less than 45 degree up to 0.8 Hz, which was the same as for the forward and reverse controls.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.2
• /
• pp.72-77
• /
• 2018

Objective: This study aimed to compare the effects of core exercise methods on muscle activation and muscle thickness in healthy young adults and to propose effective core exercise methods. Design: Three-group pretest-posttest design. Methods: A total of 30 healthy young adults (14 males, 16 females) voluntarily participated in the study. Subjects were randomized to the prone plank exercise (n=10), reverse plank exercise (n=10), or bridge exercise (n=10) groups. Muscle activity and thickness of the rectus abdominis (RA), multifidus (MF), external oblique (EO), and internal oblique (IO) muscles were measured using surface electromyography and ultrasound. Subjects from each group participated in the exercises five times a week, with five 20-second sets during week 1. The set time was increased by 10 seconds per week. Results: Muscle activity and thickness in the prone plank, reverse plank, and bridge exercise group were statistically significant different for RA, MF, EO, and IO changes over time, and interaction between time and groups were also significantly different (p<0.05). We analyzed statistically significant differences between groups using a one-way analysis of variance for each period. A significant difference was observed after 4 weeks of exercise (p<0.05). Conclusions: The results suggest that the prone plank exercise is a beneficial method for enhancing muscle activation and thickness of the RA, EO, and IO compared to the reverse plank and bridge exercises. On the other hand, the reverse plank and bridge exercises are effective methods for enhancing the MF compared to the prone plank exercise.