• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.362-374
• /
• 2000

In this paper, trellis coded 16 QAM Multi-Carrior CDMA system is proposed, Using the equivalent signal-to-noise plus interference Power ratio (SNIR) of Multi-Carrier CDMA system in the reverse link, capacity and BER performance of trellis coded 16 QAM Multi-Carrier CDMA system are analyzed taking into account the number of multi-carrier, the number of multiple access user, the number of SC/MRC diversity branch, and Rician fading parameter in multiuser interference and Rician fading channel. And the capacity and the BER performance of trellis coded 16 QAM Multi-Carrier CDMA system using selection combining (SC) and maximal ratio cabining (MRC) diversity are numerically compared. Obtained results show that the capacity of proposed system depends on the number of multi-carrier. ti is found that the trellis coded 16 QAM Multi-Carrier CDMA system with SC/MRC antenna diversity scheme is efficient to combat multipath fading and to increase the maximum number of users in high speed data communication. With the results of analysis. MRC diversity technique provides the performance fro high speed data communications. Finally, we present a numerical approach to derive the capacity and the BER performance and to find the maximum number of multiple access user for Multi-Carrier system in multiuser interference and Rician fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.883-892
• /
• 2004

Recently, in order to improve high speed data transmission and spectral efficiency in wireless communication systems, the study on the combination OFDM and space-time coding is active. Also, a solution to improve system capacity in multiuser systems is to use adaptive antennas. In a system using STBC, the signals transmitted from two transmit antennas are superposed at the receive antenna and the interference between two transmit antennas of a user occures. Thus it is difficult to apply the conventional beamforming techniques for single antenna to the systems using space-time coding. In this Paper, we present the MMSE beanforming technique using training sequence for STBC-OFDM systems in reverse link and evaluate the performance by using various parameters in TU and HT channels.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.70-80
• /
• 1997

In this paper, the performances of two noncoherent code tracking loops, i. e., traditional code tracking loop(TCTL) and modified code tracking loop(MCTL) are analyzed and compared in a CDMA mobile environment. Closed-form formulas for steady-state jitter variance are derived analytically for the two schemes as a function of the pulse shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth. The design issues of the loop filter are also addressed with emphasis on the second-order tracking loop. Finally, the degradation of BER performance due to timing errors is examined in a CDMA reverse link for IMT-2000 designed by ETRI.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.305-310
• /
• 2012

Planetary gear box is a power transmitter having very high gear ratio in compact volume. The planetary step-down gear box converts high speed and low torque into low speed and high torque, which is widely used in constructional and industrial machinery field. And, the planetary step-up gear box does vice versa working, which is used as main gear box of large sized wind mill system. The large sized planetary gear box must be performed the normal-opposite rotation test as a its durability test for achieving the reliability. The large sized planetary gear box is composed by triple gear trains of sun gear, carrier, and ring gear. If input power is supplied into one of them and the other is fixed, and then another becomes the output part. In this paper, we designed a new test equipment which can do rapid normal and opposite rotational change with only small displacement by supplying test power using the above rotation (driving) characteristics and hydraulic cylinder and link, and also compared and analyzed with existing method through various experiments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.92-101
• /
• 1997

The purpose of this welding process of the exclusive welding-machine using welding torch-rotation type is to develop a mechanism which can solve the problem of twisting of welding wires and cables. The technique was developed by revising the torch position and smooth controlling of both the normal and reverse rotation. Some of the advantages of using the torch-rotation type apply to the work-rotation technique are the practical uses of increased work space and link work with the factory automation system. Do apply the welding process, I designed and made a special unit so called torch part in order to solve the problems of kinematical. And I made a control panel which can manipulate the progress of the entire process at the work shop. Even if it will be applied to another kind of axle casing's welding work, this process can be utilized if other sizes of the fixed pin and work part is produced and changed. The development of this exclusive welding-machine could reduce the manpower of skilled welding labor and increase productivity and better quality product in comparison to the handmade product.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.667-672
• /
• 2003

Smart antennas will be used mon widely for the higher data rate and the larger number of users as the demand of wireless multimedia service is increased. Therefore, the BER performance is analyzed in this paper for DS-CDMA and MC-CDMA systems using smart antennas. A reverse link channel is simulated assuming the frequency selective Rayleigh fading. The simulation results are presented based on the characteristics of DS-CDMA and MC-CDMA systems according to the signal spectrum bandwidth and the method of adaptive beamforming. The BER performances of both systems are improved as the beam width of smart antennas is decreased. Also, it is shown that the performance of MC-CDMA system is much better than that of DS-CDMA system as the number of users is increased.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.230-236
• /
• 2002

A study on architecture of new parallel interference canceller which can be applied for reverse link of next generation mobile communication system supporting multi-rate is performed on this paper. The proposed method adopts new algorithm which can be applied for multi-rate system to reduce multiple access interference (MAI) which cause performance degradation of CDMA system and limit of channel capacity. The proposed system is evaluated by simulation results under various conditions. As a result, performance enhancement is achieved compared to existing conventional interference cancellers. Although the amount of calculation is increased, we can find that the performance is improved generally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2165-2170
• /
• 1997

In this paepr, the distortion effects of impairments in CDMA transmitter system were analyzed. We considered not only linear distortion effects, for example, I/Q imbalance, quadrature offset and carrier leakage, but also nonlinear distortion effects such as AM-AM and AM-PM noise in power amplifier. To investigate how the impariments impact on the performance of CDMA transmitter, all effects represented as a function of CDMA modulation quality which is an important measure of the transmitted signal. These results show the limitation value of each impairment which is required to satisfy the IS-95 standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.601-610
• /
• 2004

In this paper, the performance of an adaptive array antenna using Constant Modulus Algorithm (CMA) based on the signal structure for the IMT-2000 3GPP specification reverse link of an asynchronous direct sequence code division multiple access (DS-CDMA) system are evaluated. In addition, the performance is compared with the array antenna using Least Mean Square (LMS) based on the training signal. The simulation parameters such as the number of multipath, mu10pa1h intensity profiles between path, spreading gain and multiuser etc., are considered in the Monte Carlo simulation. Simulation results demonstrate an adaptive array antenna using CMA may give more capacity gain than the amy antenna using LMS in the case of multipath fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1812-1823
• /
• 1994

In this paper, we focus on the simulation of receiver algorithms for the Q-CDMA reverse link modem to analyze its structure and performance. Receiver algorithm is to be characterized by processing a large amount of data for reliable data transmission through poor mobile channel environment. According to Q-CDMA receiver scheme, we connect the code acqusition and code tracking models for despreading of input signals and the RAKE structure demodulator used to resolve the time diversity signal due to multipath propagation. And this connected system is under test. The bit error rates are found for an arbitrary user under the AWGN and multipath fading environments.