• 충청수학회지
• /
• 제15권2호
• /
• pp.47-56
• /
• 2003

This note is concerned with some properties of fixed points and periodic points. First, we have constructed a generalized continuous function to give a proof for the fact that, as the reverse of the Sharkovsky theorem[16], for a given positive integer n, there exists a continuous function with a period-n point but no period-m points wherem is a predecessor of n in the Sharkovsky ordering. Also we show that the composition of two transcendental meromorphic functions, one of which has at least three poles, has infinitely many fixed points.

• 대한기계학회논문집A
• /
• 제41권3호
• /
• pp.213-218
• /
• 2017

리모트 용접용 2D 스캐너 F-theta 렌즈의 역설계가 광선 추적기법을 사용하여서 수행이 되었다. 렌즈의 곡면 및 렌즈간 거리를 변수로 설정하고 초점거리를 Marginal Ray Height 로 설정하여, 상용 광선추적기법 프로그램을 사용하여 무한반복 최적화를 수행 하였다. 최종목표 값을 설정 후 Merit Function에 정의된 기준에 따라, 최종 초점거리와 초점의 크기를 최종 목표 값 가중치로 설정하였다. 최적화된 렌즈는 총 4매이며, 벤치마킹된 상용렌즈의 초점거리(185mm) 보다는 다소 근거리인 137mm로 최적화 되었지만, 초점의 크기는 레이저 입사각에 따라 RMS 기준 $1.3{\mu}m$, $6.2{\mu}m$ 그리고 $16.1{\mu}m$로 계산 되었으며, 이는 상용렌즈에 근접하는 성능을 구현한다. 입사각별 왜곡도를 중첩 하여서 비교 분석한 결과, 입사각 $0^{\circ}$와 $12.5^{\circ}$에서는 기존 렌즈와 거의 유사한 형태로 나타나는 것을 볼 수가 있어, 본 연구에서 제안된 역설계기법이 사용자 환경에 따라서 효과적으로 적용되어 최적설계가 이루어질 수 있을 것으로 기대가 된다.

• 공업화학
• /
• 제35권2호
• /
• pp.115-121
• /
• 2024

본 연구는 W1/O/W2 이중유화법을 통한 마이크로 캡슐화 공정을 최적화하기 위해 역미셀(reverse micelle), salt 농도 등의 열역학적 변수와 유체의 점도, 계면장력 등 계면의 유동에 영향을 미치는 공정변수들의 영향성을 분석하였다. 아스코르브산의 PLA (polylactic acid) 미립자 내부로의 캡슐화 효율에 가장 큰 영향을 미치는 변수는 W1과 W2상의 삼투압의 차이로 W2상의 salt 농도를 높이거나, W1상의 아스코르브산 농도를 줄이면 캡슐화 효율이 높아짐을 관찰하였다. 또한, 삼투압의 차이가 클수록 미립자 표면의 손상이 심해짐을 확인할 수 있었다. 캡슐화 효율을 높일 것으로 예상되었던 역미셀 도입은 그 기여도가 낮거나 오히려 캡슐화 효율을 낮추었다. 마이크로캡슐의 수율은 공정 조건, 용액 조성 등과 상관없는 universal 함수로 표현하였는데, Ca > 20에서는 더 이상의 수율 증가가 관찰되지 않았다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.849-851
• /
• 2003

A location-based service or LBS in a cellular telephone network is a service provided to the subscriber based on his current geographic location. This position can be known by user entry or a GPS receiver that he carries with him, but most often the term implies the use of a function built into the cell network that uses the known geographic coordinates of the base stations through which the communication takes place. One implication is that knowledge of the coordinates is owned and controlled by the network operator, and not by the end user. Location utility service provides two kinds of functions, geocoder and reverse geocoder. Geocoder converts an address into a coordinate and reverse geocoder changes a coordinate into an address. Because location utility service is the first step to progress LBS, various servises such as directory, routing, presentation, and etc require to access that. In this paper, we will describe the architecture of LBS platform and the concept and the role of location utility service.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.423-426
• /
• 2022

Reconstruction of the upper lateral lip subunit is challenging, and use of several classical local flaps have been previously reported. However, these methods have drawbacks such as visible scarring, anatomic distortion, and functional disability. To obtain satisfactory results, preservation of perioral function is important. We report a case of functional upper lip reconstruction after tumor resection using a reverse facial-submental artery island flap with a reinnervated anterior belly of the digastric muscle (ABDM) without sacrificing the perioral structure. A 73-year-old man presented with basal cell carcinoma on the left upper lip which was widely excised, including the orbicularis oris muscle. The remaining 4 cm × 3.5 cm defect was reconstructed using a reverse facial-submental artery island flap with ipsilateral ABDM. The motor nerve of the ABDM was sutured with the stump of the buccal branch of the ipsilateral facial nerve. The postoperative course was uneventful, and good functional and esthetic recovery were observed at 12-month follow-up. This procedure may be an alternative option for reconstruction of lateral upper lip defects.

• Clinics in Shoulder and Elbow
• /
• 제26권1호
• /
• pp.93-106
• /
• 2023

Reverse total shoulder arthroplasty (RTSA) emerged as a new concept of arthroplasty that does not restore normal anatomy but does restore function. It enables the function of the torn rotator cuff to be performed by the deltoid and shows encouraging clinical outcomes. Since its introduction, various modifications have been designed to improve the outcome of the RTSA. From the original cemented baseplate with peg or keel, a cementless baseplate was designed that could be fixed with central and peripheral screws. In addition, a modular-type glenoid component enabled easier revision options. For the humeral component, the initial design was an inlay type of long stem with cemented fixation. However, loss of bone stock from the cemented stem hindered revision surgery. Therefore, a cementless design was introduced with a firm metaphyseal fixation. Furthermore, to prevent complications such as scapular notching, the concept of lateralization emerged. Lateralization helped to maintain normal shoulder contour and better rotator cuff function for improved external/internal rotation power, but excessive lateralization yielded problems such as subacromial notching. Therefore, for patients with pseudoparalysis or with risk of subacromial notching, a medial eccentric tray option can be used for distalization and reduced lateralization of the center of rotation. In summary, it is important that surgeons understand the characteristics of each implant in the various options for RTSA. Furthermore, through preoperative evaluation of patients, surgeons can choose the implant option that will lead to the best outcomes after RTSA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.351-357
• /
• 2003

An easy learning elevator originated is opened to compare the existed teaming equipment, and it had a high studied efficiency that the sequence control circuit can open and close with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demostrated by the constructive apparatus with the lamps to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward reverse breaker and the motor of load, and the mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connect each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequently the cage could go and come till 1∼5 steps with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of L/S1 ∼ L/S5 let posit with the control switchs of S/W1 ∼ S/W5 of PLC testing panel and switchs of S/W1 ∼ S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is the hand-auto operation combined learning equipment to study the principle and technique of the originate sequence control circuit and the auto program of PLC.

• 전기화학회지
• /
• 제13권4호
• /
• pp.277-282
• /
• 2010

자동차용 고분자전해질 연료전지의 열화는 시동 또는 정지 시에 'reverse-current condition'이라 불리는 현상에 의해 촉진된다. 연료전지 자동차의 운전 종료 후 장시간동안 주차를 해 두면, 대기 중의 공기가 스택 내로 서서히 유입되어 시간이 경과함에 따라 산소분압이 점차 높아져 궁극적으로는 연료극과 공기극의 유로가 모두 공기로 충진된다. 이때 재시동하면서 연료극으로 수소가 공급되면, 연료극 유로 내에 수소와 공기가 공존하게 되고, 연료극에 공기가 존재하는 부위의 공기극에 1.4 V 이상의 높은 전압이 발생하는데, 이를 reverse-current condition 이라고 하며 공기극의 탄소담지체와 백금 촉매 산화의 원인으로 작용한다. 본 연구에서는 재시동시 스택 내에 존재하는 산소의 농도에 따른 열화 현상을 규명하고자 하였다.

• Archives of Reconstructive Microsurgery
• /
• 제23권2호
• /
• pp.65-69
• /
• 2014

Purpose: Soft tissue reconstruction is essential for recovery of finger function and aesthetics in any traumatic defect. The authors applied a reverse homodigital artery island flap for soft tissue defect on distal part of digits. The aim of this study is to evaluate the efficacy of the procedure. Materials and Methods: Seven cases of soft tissue defects of finger tip were included in this study. There were six male and one female, mean age was 43 years and mean follow-up period was 38 months. The length of flaps ranged from 2.0 to 2.5 cm and width ranged from 1.0 to 2.0 cm. Flap survival, postoperative complications were evaluated. Results: All flaps survived without loss. Donor sites were repaired with primary closure in five cases and skin graft in two cases. None of the patients showed significant complications and their average finger motion was $255^{\circ}$ in total active motion at the last follow-up. Conclusion: The authors suggest that the reverse homodigital artery island flap could be a versatile treatment option for the soft tissue defect on distal part of digits.