• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.9-15
• /
• 2017

This study represents basic research for the development of submerged pump technology applicable to transfer and storage of a cryogenic liquids. Its purpose is to secure baseline design data by applying reverse engineering to the process of developing a submerged cryogenic pump. The two-stage model included in the ARTICK Series LNG Submerged Pump produced by Vanzetti of Italy was selected for analysis for development of a localized product, and was disassembled for reverse engineering. The pump was disassembled after analyzing its processing/assembly characteristics such as shrinkage of fittings. In addition, the materials used in manufacturing of the main components were analyzed, and the ingredients were confirmed. As a result, a design drawing for each component required for product development was secured via foundational design, and a test product was manufactured by maximizing the application of appropriate domestic technologies.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5695-5706
• /
• 2015

최근 국내외 건설 분야에서 건축물 리노베이션 및 유지보수를 위한 BIM 적용이 활발해지는 추세이나, 상당수 기존 건축물이 현 상태를 반영하지 않은 2D 도면을 보유함에 따라 이를 바탕으로 한 BIM 모델 작성이 어려운 상황이다. 따라서 본 연구는 역설계 기술을 활용하고자, 건축 MEP 역설계 지침을 위한 포인트 클라우드 데이터 관련 데이터 구조 및 프로세스를 분석하고, 역설계 지침을 위한 고려사항을 도출하였다. 국내 시장에서 3차원 스캐닝 기술의 활발한 적용을 위해, 프로젝트 수행 초기 단계인 지상 라이다를 이용한 현장에 대한 데이터 취득, 취득 단계에서 얻은 포인트 클라우드 데이터의 기초 처리 및 프로세스 분석에 대해 연구 목적을 두고 있다.

• 소성∙가공
• /
• 제29권3호
• /
• pp.163-171
• /
• 2020

We present a multi-step cold drawing for a non-equiatomic Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ high entropy alloy (HEA) with a simple face-centered cubic (FCC) crystal structure. The distribution of strain in the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires was analyzed by the finite element method (FEM). The effective strain was expected to be higher as it was closer to the surface of the wire. However, the reverse shear strain acted to cause a transition in the shear strain behavior. The critical effective strain at which the shear strain transition behavior is completely shifted was predicted to be 4.75. Severely cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires up to 96% of the maximum cross-sectional reduction ratio were successfully manufactured without breakage. With the assistance of electron back-scattering diffraction and transmission electron microscope analyses, the abundant deformation twins were found in the region of high effective strain, which is a major strengthening mechanism for the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wire.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.271-276
• /
• 2006

Railroads made many contribution to modernization being developed so quickly as public transportation, but after middle of 20 century, its qualities are getting low because of focusing on the investment and development of cars and airplanes. Its role which is getting the excellent merits on the mass transportation, rapid transit. safety, state period, energy efficiency, and prevention of environmental pollution has been reconsidered. Element of horizontal alignment In an existing railroad line is needed as basic materials, when it will be improved or moved. If its design drawing was lost or damaged, it is impossible to recover. It is riot easy to repair for it as disasters. We must understand an existing railroad line to bring a function included a basic geography situation. In this studies we acquire, analyze. and handle the digital picture of railroads and then reappear shape of three dimension. But also we want to contribute to establish the facilities information choosing materials of existing railroad line in outputting the alignment element by reverse.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 추계 총회 및 학술발표회
• /
• pp.59-59
• /
• 1996

막분리에 의한 폐윤활유 재생공정을 개발하기 위한 기초 연구로써 폐윤활유 분리/재생용으로 적합한 복층(multilayer)세라믹 복합막의 제조와 합성막의 폐유 분리 효율등이 연구되었다. 결함이 없고 두께가 균일한 지르코니아 복합막 (기공크기 0.07 $\mu$m 이하)은 압출 성형법으로 제조한 튜브형 $\alpha$-알루미나 담체 (외경 7.8 mm, 두께 0.6 mm, 기공크기 0.7 $\mu$m)내부표면에 역침지 인상법(reverse dip-drawing technique)에 의하여 지르코니아 슬러리를 코팅 한 후 950$\circ$C에서 1시간 열처리하여 제조 되었다. 또한 지르코니아 복합막 위에 니타니아 졸-겔 코팅을 한 후 450$\circ$C에서 2시간 열처리하여 기공크기가 15 nm정도인 3층 복합막을 제조 하였다. SEM, Bubble Point Test, Mercury Porosimeter 그리고 분획 분자량 측정등에 의하여 복합막의 코팅층 두께, 결함유무 및 막의 기공크기등을 분석하였다.

• 소성∙가공
• /
• 제1권1호
• /
• pp.95-103
• /
• 1992

The plane strain analysis for simulating the stretch/draw forming operation with an arbitrarily-shaped tool profile is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The linear line elements are used for depicting the formed sheet, based on membrane approximation. The FEM formulation is tested in the sections of automotive inner panel and two-side draw-in. Not only the excellent agreement between measured and computed strains is obtained in the stretched section, but also the numerical stability of formulation is verified in the draw-in section.

• 대한가정학회지
• /
• 제50권5호
• /
• pp.25-38
• /
• 2012

Drawing on social and cultural capital theory, the study investigates the influences of social capital and cultural capital on the academic achievement of children in out-of-home care. We collected data from 494 children living in out-of-home services, including institutional care facilities, foster care homes, and group homes. To analyze the collected data, a multiple regression analysis method was used. In addition, the IV (instrumental-variables) estimation was utilized to rule out the possibility of reverse causality. The level of children's social capital was measured through children's relationships with parents and friends, parental monitoring, etc. The level of children's cultural capital was measured by their cultural activities, such as going to museums, and playing musical instruments. Children's personal characteristics and placement history in out-of-home services were used as control variables. We found that among personal characteristic variables, self-esteem, depression and anxiety, and delinquency affected the academic achievement of the children. Cultural capital, but not social capital, positively affected the level of academic achievement of the children. Based on the study results, implications for child welfare practice were discussed.

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.1-13
• /
• 2008

Gestwicki 등은 객체 그래프의 더 좋은 그림을 얻기 위하여 클래스 다이어그램으로부터 객체 다이어그램의 구조를 탐지하고 예측하는 기술을 제안하였다. 그들의 방법은 클래스 다이어그램으로부터 두 가지 예측 가능한 구조-되부름 덩어리 (recursive cluster)와 잎 덩어리 (leaf cluster)를 찾는다. 하지만 이 방법은 출발점이 클래스 다이어그램이므로 실제 프로그램에 적용하기에는 실제적이지 않다. 본 연구는 자바 클래스 파일에 적용하기 위하여 그들의 방법을 확장하고 구현한다. 자바 클래스 파일로부터 추출한 클래스들과 덩어리들의 구조와 관련성을 얻는다. 이 정보는 JIVE와 같은 자바 프로그램 실행 시각화 도구에게 제공되어 객체 다이어그램의 틀로 사용될 수 있다.

• 한국지능시스템학회논문지
• /
• 제14권1호
• /
• pp.20-27
• /
• 2004

인쇄회로기판 제작에 사용되는 국제표준규격의 거버 파일로부터 부품 위치 이름을 자동으로 추출하기 위한 문자인식 시스템을 제안한다. 거버 파일은 벡터형식의 그림파일로서, 각종도형 및 기호가 문자와 혼합되어 있으며, 가로쓰기와 세로쓰기 및 역 세로쓰기가 병용된다. 거버문자인식 시스템은 거버 파일에서 문자패턴을 추출하여 분리하는 전 처리 단계와 추출된 패턴을 인식하는 인식단계 및 인식된 문자와 숫자를 조합하여 부품위치이름을 구성하는 후 처리단계로 구성된다. 특히 인식률 향상을 위하여 신경회로망에 의한 다중인식기 및 구조적 특징을 이용한 검증기를 개발한다. 본 논문에서 개발된 거버문자 인식시스템은 인쇄회로기판 조립 및 검사 장비를 위한 자동 프로그래밍 시스템에 사용되어, 전자제품 제조시스템의 생산성 향상에 기여할 수 있다.