• 치과방사선
• /
• 제4권1호
• /
• pp.31-37
• /
• 1974

The author has studied roentgenographic images of temporomandibular articulation using various conventional roentgenographies. The roentgenographic images have obtained by application of the contrast media on the glenoid fossa and condylar head in a human dry skull. Comparing the various roentgenograms by Modified Transcranial projection, A-P T.M. articulation projection, Reverse Towne projection, Mayer projection and Bregma-Menton projection. The author has drawn following results. 1. The sharp radiogaphic details were obtained by all technics used except the Bregma-Menton projection, which seemed to be impractical to the study of T.M.J. because of to be shortened the image of condylar head. 2. The best image of the condyle-fossa relationship was appeared by Modified Transcranial projection and better image was acquired by Orbito-Ramus projection, but there were all inferior in Reverse Towne projection, Mayer projection and Bregma-Menton projection. 3. In all of the above techniques, the radiographic images of condylar head were clear and were appeared to be the convex type in Modified Transcranial projection, the angled type in Orbito-Ramus and Reverse Towne projection, the flat type in Mayer projection and the distorted angled type in Bregma-Menton projection. 4. The radiographic image of condylar head was shortened in Bregma-Menton projection only and was magnified somewhat in other projection.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.774-783
• /
• 2020

For the issue of subsurface target localization by reverse projection, a new approach of target localization with different distances based on symmetric sub-array multiple-input multiple-output (MIMO) radar is proposed in this paper. By utilizing the particularity of structure of the two symmetric sub-arrays, the received signals are jointly reconstructed to eliminate the distance information from the steering vectors. The distance-independent direction of arrival (DOA) estimates are acquired, and the localizations of subsurface targets with different distances are realized by reverse projection. According to the localization mechanism and application characteristics of the proposed algorithm, the grid zooming method based on spatial segmentation is used to optimize the locaiton efficiency. Simulation results demonstrate the effectiveness of the proposed localization method and optimization scheme.

• 한국경영과학회지
• /
• 제42권1호
• /
• pp.29-41
• /
• 2017

Korea is expected to become a super-aged society by 2050. Given an aging population and the increasing pressure for the early retirement, a sufficient social safety net for elderly population becomes important. The Korean government introduced public reverse mortgage program in 2007, which is a product for aging seniors and the elderly, The number of reverse mortgage subscribers has also steadily grown. The demand continues to grow, but the reverse mortgage over a long period of time is a highly uncertain and risky product in the position of guarantee or lending institution. Thus, suitable demand prediction of the reverse mortgage subscribers is necessary for stable and sustainable operation. This study uses a Bass diffusion model to forecast the long-term demand for reverse mortgage and provides insight into reverse mortgage by forecasting demand for stability and substantiality of the loan product. We represent the projections of new subscribers on the basis of the data obtained from Korea Housing Finance Corporation. Results show that potential market size of Korean reverse mortgage reaches approximately 760,000-1,160,000 households by 2020. We validate the results by comparing the estimate of the cumulative number of subscribers with that found in literature.

• 응용통계연구
• /
• 제31권1호
• /
• pp.77-96
• /
• 2018

주택연금은 계약기간이 확정되어 있지 않기 때문에 계약 종료 시점에 대한 확률분포 예측이 장수리스크 관리를 위하여 중요하다. 따라서 고령화의 주요인인 기대수명의 연장은 연금 재정건전성에 심각한 영향을 끼칠 수 있기 때문에 사망률의 개선 추세가 적절히 반영된 사망률 예측 연구가 선행될 필요가 있다. 본 연구에서는 Lee-Carter (LC) 모형과 연생모형을 이용하여 주택연금 계리모형에 사망률 개선 효과를 반영하였다. 전통적 LC 모형을 통한 사망률 예측 방식은 미래 사망률이 지나치게 개선되는 현상을 보이고 있기 때문에 사망률 개선효과를 조금 더 적절한 수준으로 보정하고자 본 연구에서는 사망확률 분포의 편중을 나타내는 왜도를 활용한 LC 모형을 적용하였다. 왜도 예측 방식을 LC 모형에 적용한 방법론을 사용하여 주택연금 월 지급금을 산출해본 결과 전통적 LC 모형의 사망률 예측보다 사망률 개선효과를 더 적게 반영하여 더 큰 월 지급금이 산출되었고, 왜도 활용 LC 모형에 의한 이러한 결과는 장수 리스크를 덜 왜곡한다는 데 의의가 있다고 볼 수 있다. 본 연구 결과는 사망률 감소 추세를 적절하게 반영한 위험률을 계산하여 주택연금의 발행기관 및 보증기관의 적정한 월 지급금 지급과 차후 월 지급금의 과대지급으로 인한 지급불능을 방지할 수 있는 리스크 관리 방법으로 이용될 수도 있다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.412-419
• /
• 2003

The most product is manufactured by mould in usual life. From drawing to manufacturing is to be automatically. But inspection is handwork usually. An alternative idea of this problem is reverse engineering. In this study, press forming is measured by 3D non-contact coordinate measuring machine and problem will be analyzed by comparing with 3D data Through the study, it will achieve improvement of press mould process.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1129-1138
• /
• 1999

[$Moir\acute{e}$] technique is now being extensively investigated as a fast non-contact means of three-dimensional profile measurement especially for reverse engineering. One problem with $moir\acute{e}$ technique is so called $2\pi$-ambiguity problem that limits the maximum step height difference between two neighboring sampling points to be less than half the equivalent wavelength of $moir\acute{e}$ fringes. In this investigation, a new two-wavelength scheme of projection $moir\acute{e}$ topography is proposed and tested to cope with the $2\pi$-ambiguity problem. Experimental results are discussed to assess the new method in measuring large objects with high step discontinuities.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.62-67
• /
• 2007

A simple dimension measuring method for the measurement of human bust has been developed using projection moire. The 3-D data of a human bust was calculated from the 2dimensional image information obtained by the stripe using projection moire. The creation of 3-D geometric shape by digitizing real objects has been widely investigated in reverse engineering(RE). This procedure generally consists of three basic steps: data capture, data alignment and model reconstruction. In order to achieve a complete model, multiple scans must be taken and aligned.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1276-1283
• /
• 2004

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.419-422
• /
• 2005

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause fellowing the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.962-965
• /
• 2005

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.