• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1910-1912
• /
• 1999

This paper was described electrical characteristics of Metal/GaN contact for application of GaN thin films. The lowest contact resistivity was $1.7\times10^{-7}[\Omega-cm^2]$ at Ti/Al Structure. Mean while, GaN MESFETs have been fabricated with a 250 nm thick channel on a high resistivity GaN layer grown by GAIVBE system. For a gate-source diode reverse bias of 35 V, the gate leakage current was $120{\mu}A$. From the data, we estimate the transconductance for our GaN MESFET to be 25 mS/mm.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.161-164
• /
• 2000

A simple methode for calculating the forward voltage drop of IGBTs is presented, on the voltage drops on the p+ body, the reverse biased depletion region between p+body and epi-layer, the epi layer, and the forward biased collector junction. The decrease of the total current density in the epi layer near the p+ body is taken into account. The proposed methode allows a simple but accurate determination of the forward voltage drop in IGBTs, avoiding the complex path taken in the previous model for the forward voltage drops on channel, accumulation region, and epi region. Numerical simulations for 1kV NPT-IGBT with a uniformly doped collector are shown to support the analytical results.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1111-1113
• /
• 1995

To improve latch up characteristics of IGBT, this paper proposed new structure with reverse channel. IGBT proposed by this paper were designed on SOI substrate, $p^+$-substrate, and $n^+$-substrate, respectively. As a result of the simulation, we had achieved high latch up voltage and high conduction current density at IGBT with proposed structure. Latch up voltage of Conventional IGBT was 2.5V but IGBT with proposed structure was latched up at $5{\sim}94V$, respectively. And was showed high conduction current desity($10^4{\sim}10^7A/cm^2$)

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.211-214
• /
• 1997

This paper applies fuzzy self-tuning PID controller in DS/CDMA cellular system. Power control is essential in DS/CDMA to compensate for the differing received powers due to both the slowly varying long-term and fast varying short-term fading processes and co-channel interference. The controller proposed is adaptable for the variations of the system dynamics and especially for the variable time delay which exists in mobile radio systems. Accordingly the results is the smaller power control error, that is, the smaller average transmitting power of mobile compared with the conventional control schemes. Because interferences to the other mobiles are reduced, the capacity of CDMA can be increased.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.307-320
• /
• 1996

The purpose of this study is to classify of the ancient belt 'the Gwathai' especially in the timesof three countries. For this purpose the Gwathai was classified as to the motif which was decorated on the plate of the Gwathai and also another parts of the Gwathai were studied. The Gwathai could be classified of three parts. The first rectangular plate and the hanging part with heart motif and the second reverse-heart plate. The character of the third part was the specificity of the plate motif. Also there was a hanging part at the Gwathai and it was organized with the diverse form At first it was used for the practical pur-pose and then later for the decorational pur-pose. But this study could'nt reval the chang channel of the Gwathai and the relation be-tween region. This is the limit of this study. So more study is necessary to clarify this point.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1362_1363
• /
• 2009

In this study, we predicted the thermal breakdown of high-voltage interrupter with the characteristics of thermal plasmas such as temperature, pressure and concentration of the ablated material by using a commercial CFD program. The results showed that the pressure build-up inside the chamber was proportional to the magnitude of arcing current because the quantities of heat energy and ablated mass also increase together with the current during the compression process. And during the decompression process, the reverse flow was not coincided with the magnitude of the applied current due to the compressibility of the gas through backflow channel. The present method is expected to be useful for the design of guideline and interruption capacity on the thermal breakdown of a PASB chamber.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.39-46
• /
• 1998

In the FDMA and TDMA Cellular Systems, call blocking rise when frewquence slots andtime slots are used to ther users. Otherwise, in the CDMA cellular systems, call locking arises when interference level is above 10dB according to call of other users. System capacity is defined to be Erlang capacity that is the number of users when CDMA blocking probability is 1% or 2%. Users number corresponded channel number of AMPS and TDMA cellular systems. In this paper, we proposed new reuse-fraction using square of interference poser and obtained Erlang capacity for reverse link of CDMA cellular system with bit rate $R_{b}$, 9.6kbps and 14.4kbps. As a results, Erlange capacity of CDMA system have more 20.7 and 5.5 times than AMPS and TDMA system and have more form 1 to 4 Erlang thatn Viterbi and Padovani obtaned.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.59-64
• /
• 1994

The Si-SiO$_2$interface trpas of the degraded short-channel SONOSFET memory devices were investigated using the charge pumping techniques. The degradation of devices with write/erase cycle appeared as the increase of the Si-SiO$_2$interface trap density. In order to determine the capture cross-section of the interface trap. I$\_$CP/-V$\_$GL/ characteristic curves were measured at different temperatures. Also, the spatial distributions of Si-SiO$_2$interface trap were examined by the variable-reverse bias boltage method.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.6 s.33
• /
• pp.47-54
• /
• 2005

An oscillating foil can produce a driving force through the generation of a reversed $K\'{a}rm\'{a}n$ vortex street, and it can be expected to be a new highly effective propulsion system. A simple pitching foil model was made and it was operated within a water channel. The wake formation behind a pitching foil was visualized and unsteady fluid forces were measured using a 6-axis force sensor based on force and moment detectors. We have been examined various conditions such as reduced frequency, amplitude and pivot point in NACA 0010. The results showed that thrust coefficients increased with a reduced frequency. We also presented the experimental results on the characteristics of a pitching foil at various parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2090-2098
• /
• 1996

This paper analyzes decorrelating detector for synchronous packet CDMA communications where a set of quasiorthogonal code waveforms are generated from a common code by assigning distinct initial code phases to all users. In this analysis, we characterize the residual multiple-access interference (MAI) caused by possibletiming offsets when synchronous and simultanceous packet transmissions are on the reverse link of centralize networks. Also, to show feasibility of decorrelating detector employing the common code, we further investigate its robustness against the multipath channel. It is demonstrated that the decorrelating detector greatly reduces the residual MAI to the order of N$^{-2}$ , N number of chips/bit, and yields significant performance gain compared to the single user detector.