• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.181-186
• /
• 2006

본 논문에서는 지진파 역행 전파를 이용하여 지진원을 영상화 하는 방법에 대한 연구를 수행하였다. 시간 역행 전파는 파동 방정식의 시간 반전의 불변성과 상반정리로 설명할 수 있으며 파동의 시간 역행 전파는 의학적인 목적을 비롯한 비파괴 검사, 그리고 탄성파 파형 역산에 사용되어 매질을 영상화 하는데 활용되고 있다. 지진 관측소에서 관측된 지진파형은 지진원으로부터 방출된 에너지를 기록한 것이다. 이를 시간의 역순으로 매질로 전파시키면, 지진으로부터 전파되었던 에너지가 진원시각의 지진원 위치에 집중하게 되어 지진원을 영상화 시키는 원리이다. 본 연구에서는 3차원 지진파 전파의 수치 모의를 위해 엇갈린 격자 유한 차분법과 병렬 처리 기법을 이용하여 탄성 매질에서의 파동방정식의 해를 구하였다. 수치모의 결과로부터 지진파 역행 전파를 이용해 지진의 시공간적 발생양상을 살펴볼 수 있음을 확인하였다.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.66-73
• /
• 2015

OFDM 기반 통신시스템에서 IFFT는 중요한 핵심 컴포넌트 중의 하나이다. 본 논문에서는 OFDM 기반 통신시스템을 위한 메모리가 효율적인 새로운 IFFT 설계 방법을 제안한다. OFDM 기반 통신시스템에서 사용되는 IFFT의 입력신호는 데이터 변조신호, 파일럿과 널(null) 신호로 구성된다. 제안한 방법은 IFFT 입력신호의 매핑을 통해 IFFT에서 가장 큰 메모리를 차지하는 비트리버스의 메모리를 감소시키는 데 초점을 둔다. 비트리버스의 메모리 크기를 감소시키기 위해 DIT기반 구조에 적합한 선택 매핑기법을 제안한다. 시뮬레이션을 통해 제안한 방법이 기존 방법과 비교하여 약 50%의 메모리가 감소됨을 보인다.

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.215-221
• /
• 2013

Purpose: Opuntia Humifusa has been used in the food and beauty industry after removing spines and glochids clearly. This study compared the methods used in removing spines and analyzed the design factors for developing a spine removal device. Method: This study compared the spine removal ratios in accordance with the length of brush, water spray pressure, the number of water spray, and the size of Opuntia Humifusa in a rotating brush device and a water spray device. In addition, this study compared the reversal ratios according to the inclination angle of a conveyor, the drop height of Opuntia Humifusa, and the speed of the conveyor to analyze the reversal factors. Results: The spines were not removed clearly in the rotating brush method, and the glochids were nailed deeply. The spine removal ratio was 96.9% with the water spray pressure of 20 $kgf/cm^2$ and the conveyor speed of 10 cm/s in the water spray method. The number of water spray was correlated with the spine removal ratio, and the average spine removal ratio was 95.6% with three cycles of water spray. The reversal ratio was 97% with the inclination angle of the conveyor $20^{\circ}$, the drop height of 380 mm, and the conveyor speed of 10 cm/s. Conclusions: In order to develop a Opuntia humifusa spine removing device, this study compared the rotating brush and water spray methods. As a result, each spine removal performance of the rotating brush and water spray methods was 96.9% and 95.6%, respectively. Although the performance of the rotating brush method was slightly higher than that of the water spray method, the water spray method was suitable for removing spines from stem because the epidermis of stem was damaged and the glochids were nail deeply in the rotating brush method. Further studies on appropriate arrangement of spray nozzles, maintaining the optimal water spray pressure, the speed and angle control of the feeding conveyor, and devices for inducing the stem to the center will be needed in combining the water spray device and the reversal device.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.436-439
• /
• 2005

In general a square master and a dial gauge are used to measure the axis squareness on the spot. This method is a comparison measurement and its accuracy depends on the square accuracy wholly. Therefore the accuracy of a square master is very important and it is impossible that the accuracy of a square measurement is superior to the accuracy of a square master. In this paper, the new method of square measurement is proposed for measuring square without a square master and easily. This method is an absolute measurement by using a reversal method and can be used to measurement the accuracy of a square master.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.195-198
• /
• 2004

This study applied EK method to remediate contaminated soil by heavy metal(Pb), tried to increase the efficiency of remediation using zeolite as enhanced EK remediation method to overcome the limit of traditional EK remediation method. Adsorption tests on Pb were conducted to apply the EK extraction and test conditions which contained the electrode reversal, operating time were established. After tests, lead-ions were transported into the specific position of zeolite by EK phenomena, then the immobilization of lead-ions at zeolite was developed. Based on these tests, the efficiency of remediation is different with its test conditions. In addition, the efficiency of remediation was improved dramatically by adding zeolite without electrode reversal and satisfied TCLP regulation of EPA in USA through the whole sample range. Finally, absorption and immobilization capacity of zeolite were proved its excellence and confirmed the possibility of application as enhanced EK remediation method.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1120-1131
• /
• 2011

Researches using time reversal acoustics(TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of a plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric(PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• Clinical and Experimental Reproductive Medicine
• /
• 제25권3호
• /
• pp.341-348
• /
• 1998

Objective: To determine the reproductive outcomes of women undergoing microsurgical reversal of tubal sterilization at age 36 years or older. Materials and Methods: A series of 133 patients who received microsurgical reversal of the previously sterilized fallopian tubes at Seoul National University Hospital from July, 1980 to January, 1992 was reviewed and evaluated for clinical characteristics, pregnancy rates, and factors influencing the outcome of tubal reversal. Results: Of 133 patients, 78 (58.6%) had been sterilized by laparoscopic cautery. Loss of children was a leading cause for tubal reversal. The mean interval from tubal sterilization to tubal reversal was 65.0 months. The overall pregnancy rate was 52.6% (70/133), and the mean interval was 9.4 months from tubal reversal to pregnancy. Excluding 7 patients who were lost to follow-up, 76 pregnancies were confirmed in 63 patients with the delivery rate per patient of 66.7% (42/63). There were no significant differences in age, duration of tubal sterilization, postoperative tubal length between pregnant and non-pregnant groups. Conclusions: Microsurgical reversal of tubal sterilization could be a justifiable method in women 36 years age or older.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.124-128
• /
• 2012

Many different converter topologies have been developed with a view to use the minimum number of switches in order to reduce construction costs. Among this research, the four-switch converter topology with a novel PWM control technique based on the current controlled PWM method is thought to be a good solution. In this paper, a two dimensional time-stepped voltage source finite-element method (FEM) is used to analyze the characteristics of a Flux-Reversal Machine (FRM) with a 4-switch converter. To validate the proposed computational method, a digital signal processor (DSP) installed controller and prototype FRM are built and experiments performed.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.64-74
• /
• 2010

This paper proposes a new TR-based baseline-free SHM technique in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM technique has two distinct features when compared with the other TR-based SHM techniques: (1) The backward TR process commonly conducted by the measurement is replaced by the computation-based process; (2) In place of the comparison method, the TOF information of the damage signal extracted from the reconstructed signal is used for the damage diagnosis in conjunction with the imaging method which enables us to represent the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.913-916
• /
• 2007

In this paper, the possibility of time reversal phenomenon was investigated in damage detection of structure. In conventional lamb wave techniques, damage is identified by comparing the measured data (baseline signals) and the current data. But this method can lead to high false signal in the intact condition of structures due to environmental conditions of the structures. So in this studying, we investigate the possibility of damage detection in the aluminum plate using the time reversal phenomenon of lamb waves.