• Journal of Magnetics
• /
• 제7권1호
• /
• pp.4-8
• /
• 2002

The magnetoresistance (MR) and the magnetization reversal of a lateral spin-injection device based on a spin-polarized field effect transistor (spin FET) have been investigated. The device consists of a two-dimensional electron gas (2DEG) system in an InAs single quantum well (SQW) and two ferromagnetic $(Ni_{80}Fe_{20})$ contacts: all injector (source) and a detector (drain). Spin-polarized electrons are injected from the first contact and, after propagating through the InAs SQW are collected by the second contact. By engineering the shape of the permalloy contacts, we were able to observe distinct switching fields $(H_c)$ from the injector and the collector by using scanning Kerr microscopy and MR measurements. Magneto-optic Kerr effect (MOKE) hysteresis loops demonstrate that there is a range of magnetic field (20~60 Oe), at room temperature, over which the magnetization in one contact is aligned antiparallel to that in the other. The MOKE results are consistent with the variation of the magnetoresistance in the spin-injection device.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.191-194
• /
• 1999

Switching behaviour of the ferroelectric thin film and device characteristics of the MFSFET (Metal-Ferroelectric-Semiconductor FET) are simulated with taking into account the accumulation of oxygen vacancies near interface between the ferroelectric thin film and the bottom electrode caused by the progress of fatigue. We show net switching current decreases due fatigue in the switching model. It indicates that oxygen vacancy strongly suppresses polarization reversal. The difference of saturation drain current of the device before fatigue is shown by the dual threshold voltages in I$_{D}$-V$_{D}$ curve as 6㎃/$\textrm{cm}^2$ and decreases as much as 50% after fatigue. Our simulation model is expected to play an important role in estimation of the behavior of MFSFET device with various ferroelectric thin films.lms.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.107-115
• /
• 2008

In this research, it has been developed the tongs mechanism by a friction force for curbstone working. This tongs apparatus was farmed to grip and rotate the rectangular curbstone. Specification of this tongs apparatus has been determined by considering a loading weight and reversal load preventing reversal of 1.5 ton excavator. And, specification of the linear actuator has been determined with considering mechanical structure and the operation power demanded by the grip pad friction of tongs apparatus. The safety of the part has been examined from the 3D numerical simulation of the tongs apparatus. The operation system has been arranged to grip and rotate curbstone by on-off switching. The prototype has been established to carry out experiment after installing 1.5 ton excavator.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.402-410
• /
• 2022

Digital data can be manipulated easily, so information related to the timestamp is important in establishing the reliability of the data. The time values for a certain file can be extracted following the analysis of the filesystem metadata or file internals, and the information can be utilized to organize a timeline for a digital investigation. Suppose the reversal of a timestamp is found on a mobile device during this process. In this case, a more detailed analysis is required due to the possibility of anti-forensic activity, but little previous research has investigated the handling and possible manipulation of timestamps on mobile devices. Therefore, in this study, we determine how time values for multimedia files are handled according to the operating system or filesystem on mobile devices. We also discuss five types of timestamps-file created (C), last modified (M), last accessed (A), digitalized (Di), and filename (FN) of multimedia files, and experimented with their operational features across multiple devices such as smartphones and cameras.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.12-16
• /
• 2007

Magnetic excitation and reversal by a spin polarized current via spin transfer have been a central research topic in spintronics due to its application potential. Special techniques are required to fabricate nano-scale magnetic layers in which the effect can be observed and studied. This work discusses the possibility of using electron-beam resists, the nano-scale patterning media, as ion milling mask in a subtractive fabrication method. The possibility is demonstrated by two resists, one positive tone, the ZEP 520A, and one negative tone, the ma-N2403. The advantage and the key points for success of this process will be also addressed.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1532-1539
• /
• 2019

This paper analyzes a new method for reducing boiling water reactor fuel temperature during a Loss of Coolant Accident (LOCA). The method uses a device called Reverse Flow Restriction Device (RFRD) at the inlet of fuel bundles in the core to prevent coolant loss from the bundle inlet due to the reverse flow after a large break in the recirculation loop. The device allows for flow in the forward direction which occurs during normal operation, while after the break, the RFRD device changes its status to prevent reverse flow. In this paper, a detailed simulation of LOCA has been carried out using the U.S. NRC's TRACE code to investigate the effect of RFRD on the flow rate as well as peak clad temperature of BWR fuel bundles during three different LOCA scenarios: small break LOCA (25% LOCA), large break LOCA (100% LOCA), and double-ended guillotine break (200% LOCA). The results demonstrated that the device could substantially block flow reversal in fuel bundles during LOCA, allowing for coolant to remain in the core during the coolant blowdown phase. The device can retain additional cooling water after activating the emergency systems, which maintains the peak clad temperature at lower levels. Moreover, the RFRD achieved the reflood phase (when the saturation temperature of the clad is restored) earlier than without the RFRD.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.281-294
• /
• 2015

Bolted joint connection is the most commonly used connection element in structures and devices. The loosening due to external dynamic loads cannot be observed and measured easily and may cause catastrophic loss especially in an extreme requirement and/or environment. In this paper, an innovative Real-time Cross-Correlation Method (RCCM) for monitoring of the bolted joint loosening was proposed. We apply time reversal process on stress wave propagation to obtain correlation signal. The correlation signal's peak amplitude represents the cross-correlation between the loosening state and the baseline working state; therefore, it can detect the state of loosening. Since the bolt states are uncorrelated with noise, the peak amplitude will not be affected by noise and disturbance while it increases SNR level and increases the measured signals' reliability. The correlation process is carried out online through physical wave propagation without any other post offline complicated analyses and calculations. We implemented the proposed RCCM on a single bolt/nut joint experimental device to quantitatively detect the loosening states successfully. After that we implemented the proposed method on a real large structure (reaction wall) with multiple bolted joint connections. Loosening indexes were built for both experiments to indicate the loosening states. Finally, we demonstrated the proposed method's great anti-noise and/or disturbance ability. In the instrumentation, we simply mounted Lead Zirconium Titanate (PZT) patches on the device/structure surface without any modifications of the bolted connection. The low-cost PZTs used as actuators and sensors for active sensing are easily extended to a sensing network for large scale bolted joint network monitoring.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.531-537
• /
• 2008

One of the fundamental features of time reversal acoustic (TRA) techniques is the ability to focus the propagating ultrasonic beam to a specific point within the test material. Therefore, it is important to understand the focusing properties of a TR device in many applications including nondestructive testing. In this paper, we employ an analytical scheme for the analysis of TR beam focusing in a homogeneous medium. More specifically, a nonparaxial multi-Gaussian beam (NMGB) model is used to simulate the focusing behavior of array transducers composed of multiple rectangular elements. The NMGB model is found to generate accurate beam fields beyond the nonparaxial region. Two different simulation cases are considered here for the focal points specified on and off from the central axis of the array transducer. The simulation results show that the focal spot size increases with increasing focal length and focal angle. Furthermore, the maximum velocity amplitude does not always coincide with the specified focal point. Simulation results for the off-axis focusing cases do demonstrate the accurate steering capability of the TR focusing.

• 대한치과의사협회지
• /
• 제49권8호
• /
• pp.443-450
• /
• 2011

The leading paradigm of dentistry had been focused on the rehabilitation treatment that identifies active caries, manages them surgically, and restores their original functions. However, changes in the external environment including the current disease prevalence require dentistry to have a paradigm shift. The new paradigm suggests the detection of caries in their earlier stages over the visual diagnosis of cavities, and the reversal of the incipient caries by non-surgical approach. For this to be achieved, a high-technology detection device recognizing changes in the earlier stages which can not he visually observed is needed. Development of early caries detection device has recently become a major issue in preventive dentistry on account of this need, and QLF(Quantitified Light induced Fluorescence) conspicuously stands out among the newly released devices. In this study, the fundamental concept of QLF(Quantitified Light induced Fluorescence) and the possible clinical applications of the earlier intraoral camera model as well as the recently designed digital camera model will be discussed.

• 대한소아치과학회지
• /
• 제29권2호
• /
• pp.159-167
• /
• 2002

본 연구의 목적은 midazolam을 이용한 의식진정 시 길항제인 flumazenil의 투여경로에 따른 효과와 안전성을 평가하기 위함이다. 연구대상으로는 $22{\sim}24$세의 건강한 15명의 자원자를 이용하였으며, 그들은 midazolam 0.2mg/Kg을 비강내 분무하여 진정하였으며, midazolam 투여 40분 후 길항제인 flumazenil 0.2mg을 정맥 내 투여 및 비강 내 투여하였다. 각 투여경로의 안전성과 효과를 평가하기 위해 다음과 같은 관찰이 실시되었다. 대상의 생징후를 관찰하기 위해 pulse oxymeter(Nellcor symphony N-3000, Nellcor Puritan CO., USA)을 이용하여 $SaO_2$ 및 맥박수를 관찰하였고, 전자혈압계(Heartcare 200, National CO., Japan)을 이용하여 이완기 및 수축기 혈압을 관찰하였다. 또한 실험대상의 주관적 평가를 위해 visual analogue scale(VAS)를 이용하여, 진정, 수면, 피로 그리고 태도에 대해 주관적인 평가를 실시하였다. 모든 대상은 특이할 부작용없이 회복되었다. 연구결과를 요약하면 다음과 같다. 1. 비강내 분무된 flumazenil은 정맥내 투여된 flumazenil에 비해 빠른 회복을 보였으나, 곧이어 정맥내 투여에 비해 깊은 수면상태에 빠졌다. 2. 비강내 투여된 flumazenil 및 정적내 투여된 경우 모두 주의할 부작용 및 생징후의 악화는 관찰되지 않았다. 회복의 목적으로 비강내 분무된 flumazenil의 결과로 미루어 볼 때, midazolam을 이용한 의식진정시 flumazenil의 비강 내 분무를 통해 보다 안전하고, 효과적인 의식진정하 치과치료가 가능하리라 사료된다. 하지만, flumazenil의 적절한 용량 및 효과를 알기위해, midazolam과 flumazenil의 혈장농도를 평가하는 약물동력학적 연구가 계속되어야 하리라 사료된다.