• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.511-520
• /
• 2003

In room acoustics, reverberation time is an important acoustic parameter. However it is often difficult to measure short reverberation times at low frequencies with a traditional band pass filter bank if the product of filter bandwidth (B) and reverberation time (T) is small. It it well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, in the previous paper, the wavelet filter bank was developed and the minimum permissible product of bandwidth and reverberation time was replaced with 4. In the present paper it is demonstrated how the short reverberation times of an practical room at low frequencies are successfully measured by using the wavelet filter bank and the results are compared with the traditional method using a band past filer bank.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2004

A number of researchers have attempted to measure the reverberation time of a passenger car, ut the reverberation time of passenger car is too short to measure with the traditional band pass filter. And if the reverberation time is very short, the product of the reverberation time (T) and the bandwidth (B) of the traditional band pass fitter becomes small. The low limit of BT product required for the measurement of reverberation time with the traditional band pass filter is 16. In order to overcome this problem, the wavelet filter bank was developed. In this study, this new wavelet filter was employed to measure the reverberation times of five different classes of passenger cars. The low limit of BT product required for the measurement of reverberation time with the wavelet filter is 4. The reverberation times of five passenger cars were measured successfully with the new wavelet filter bank. The reverberation times measured in most passenger cars was found to be around 0.04. Compared with general acoustic rooms like concert halls, this is a very short reverberation time

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1077-1080
• /
• 2002

In building acoustics, reverberation time is an important acoustic parameter. However, it is often difficult to measure short reverberation times at low frequencies using the traditional band pass filter bank if the product of bandwidth (B) and reverberation time (T) is small. It is well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16 ［F. Jacobsen, J. Sound Vib. 115, 163-170 (1987)]. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, recently, the wavelet filter bank is developed and the minimum permissible product of bandwidth and reverberation time is replaced with 4 [S. K. Lee, J, Sound Vib. 252, 141-153 (2002)]. In the present paper, it is demonstrated how the short reverberation times at low frequencies are successfully measured by using the wavelet filter bank. In order to present this job, two synthetic signals and one measured signal are used for impulse responses of an acoustic room.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.577-583
• /
• 2007

The field uniformity inside the reverberation chamber has been improved using sets of quadratic residue diffuser (QRD). The electromagnetic field inside the reverberation chamber with the dimension of $100{\times}80{\times}80cm$ has been analyzed by the finite-difference time-domain(FDTD) method. The calculated fields in a $40{\times}30{\times}30cm$ test volume have been sampled to obtain a standard deviation and field uniformity. Results show that the standard deviation of the calculated field and uniformity have been improved by varying angles and orientation of the inclined surfaces of the QRDs installed inside the reverberation chamber.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.654-657
• /
• 2005

The aim of this study is to investigate and to analyze the reverberation times of apartment houses Measurements were conducted in a total of 44 rooms(36 rooms were in occupied houses and 8 rooms were in unoccupied houses) according to KS F 2864. The results showed that the averaged reverberation time of the occupied and the unoccupied houses were about 0.3$\sim$0.5sec and 1.2$\sim$l.5 sec, respectively, at 500Hz octave band frequency. And the averaged absorbtion coefficient of the occupied and the unoccupied houses were about 0.13$\sim$0.35 and 0.11$\sim$0.20, respectively. In addition, We verified that the reverberation time generally depended on the frequency; the lower the frequency, the higher the reverberation time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.492-497
• /
• 2006

This study gives the results of the measurements and analysises of the reverberation times in a small room such as apartment houses. We measured the RT by changing measurement conditions, which were sound sources. sound source's positions, receiving point & height, sampling time and so on. The critical factor affecting reverberation time was sound source in unoccupied houses and the reverberation time differences between result of RT using impulsive and interrupted sound source was 0.3sec at 500Hz frequency. And the difference of RT due to sound sources affected the sound insulation such as apparent sound reduction index and sound level difference about 1dB at each frequency in unoccupied houses.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.6
• /
• pp.257-268
• /
• 2006

To determine the faults of ceramic cup it is proposed to use pseudo reverberation time concept estimated by impact test in room. Schroeder curves estimated from impact test for a cup with small crack and without one are utilized to estimate pseudo reverberation time. Pseudo reverberation times are compared and discussed according to a sort of impact hammers and impact points and also boundary conditions. As a result. proposed method is proved to be very useful to detect the existence of faults for candidate cups.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.671-678
• /
• 2002

High-frequency monostatic reverberation model (HYREV: HanYang Univ. REVerberation model) suitable for shallow-water environment is presented. It is difficult to predict reverberation signals in shallow water due to scattering from sea surface and seafloor. The arrival times and transmission losses from the source to scatterers are obtained from the eigenrays. The composite roughness theory is used to predict the boundary scattering. The signals generated by the HYREV and the GSM were compared with the observed signals and it is showed that the HYREV model provided a closer fit to the observed signals than those obtained using the GSM.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.31-38
• /
• 1973

The Sabine's formula has been widlely used for calculating reverberation time and applied for actual systems. The result of Sabine's method is only same as the reverberation time of one axial wave according to the wave theory. Reverberation time is mainly dependent on the standing waves. In case of the rectangular room the frequencies of three mode covering 250Hz and several intensities at various positions of the room were measures by a spectrograph. It wart found that axial wavers and tangential waves decayed more slowly than oblique waves. The experimental results showed that the amount of axial and tangential wave in a frequency band varies depending on the position in the room. It is concluded that the results give to control reverberation times in a room.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.26-33
• /
• 2014

The spatial correlation (SC) for a multipath environment based on a $2{\times}2$ MIMO system are computed on the observation planes in the Rayleigh/Rician fading channels inside a mode stirred chamber. The correlation coefficients were obtained and compared for different distances and orthogonal polarization between two transmit antennas. The proposed method is useful for quantifying the potential diversity gain in antenna diversity systems.