• 유공압시스템학회논문집
• /
• 제7권1호
• /
• pp.1-5
• /
• 2010

This paper presents the experimental results of the radial piston type oil pump with new mechanism for a metal diaphragm hydrogen compressor. Generally, metal diaphragm type hydrogen compressor systems are operated by oil hydraulic power. In this system an oil compensating pump has been demanded to compensate for a leakage oil head chamber. The metal diaphragm type hydrogen compressor consists of an oil compensating pump, commonly used hydraulic piston pump and driven by main crank shaft. The radial piston type oil compensating pump with new rolling contacted piston mechanism is developed and experimented. The developed piston element of the radial piston pump consists of piston, steel ball, return spring, two check valves, eccentric cam and ball racer. In this study, designed 4 type pistons as and orifice hole. Operating characteristics and pressure ripple characteristics are tested under no load to 60bar loaded with every 20bar increasing step and pressure ripple and flow rate are experimentally investigated.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.97-103
• /
• 2013

This paper describes the characteristics of Electronic Throttle Controller (ETC) module in BLDC motor without the hall sensor for detecting a rotor position. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analogue voltage output on the throttle valve instead of BLDC motor for detecting the rotor position. So the additional commutation information is necessarily needed to control the ETC module. For this, the estimation method is applied. In order to improve and obtain the high resolution for the position control, it is generally needed to change the gear ratio of the module or the electrical switching method etc. In this paper, the 3-phase switching between successive commutations is adapted instead of the 2-phase switching that is conventionally used. In addition, the position control with a variable PI gain is applied to improve a dynamic response during a transient period and reduce vibration at a stop in case of matching position reference. The mentioned method can be used to estimate the commutation state and operate the high-precision position control for the ETC module and the high response characteristics. The validity of the proposed method is examined through the experimental results.

• 한국농공학회지
• /
• 제30권1호
• /
• pp.31-37
• /
• 1988

This study, based on the monthly rainfall data, was carried out to determine the agricultural drought index which enables to describe the regional and seasonal drought characteristics of rice cropping system in Korea. The results obtained were summarized as follows ; 1.A new agricultural drought index (ADI) was evaluated seasonally according to the product of drought intensity and duration. This ADI is proposed as standard design criterion for irrigation planning. 2.The relationship between agricultural drought index and return periods was figured out. These diagrams could be used to estimate the seasonal drought severity of a certain year and to select design year corresponding to the specific drought frequency. 3.The regional drought characteristics were classified and those are useful to determine proper rice varieties and planting time and make drought counterplans. 4.Spring drought occurred once in 3 or 4 years and in a regional respect, rather frequently occurred in Seoul and Daegu areas than in Busan, Daejeon, Kwangju and Chuncheon areas. Summer drought occurred once in 5 years in Daegu and Busan areas and once in 7 or 8 years in other areas. 5.Sequential drought which gave severe drought damage of rice production occurred once in 20 years in Daegu area and in 10 years in Kwangju area.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.92-99
• /
• 2008

This paper describes an signal processing method for the hall sensorless position control of ETC control system using a BLDC motor. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analog voltage output on the throttle valve instead of BLDC motor for detecting rotor position of motor. So the additional commutation information is necessarily needed to control the mentioned ETC module. In order to estimate and determine the commutation state, it is proposed to properly manipulate the resolution of A/D converter considering the mechanical parameter, that is, the number of motor slot and the ratio of reduction gear. Through this method, the estimation of commutation state for operating the system is possible and the discrete signal for commutation is stably obtained. The validity of the method is examined through the experimental results.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.857-864
• /
• 2007

In the current residential building, hot water supply system consumes the second largest energy in order to make the thermal comport condition of residential space. The more residential environment improves the more the demand for hot water and water consumption is increasing gradually. So this study examines the possibility of applying the recirculation for individual hot water supply system compared with the existing method for waiting time for hot water, wasted water and energy consumption. The results are as follows. (1) In case of recirculation system method the waiting time for hot water can be reduced up to $69\sim85%$ in spring and fall period and so dose up to $77\sim85%$ in winter period. (2) The total wasted water has a little change compared with the existing method which can make the total wasted water reduced about $77\sim86%$. (3) The efficiency of hot water supply system can be improved, if the method which blocks the inflow of cold water is applied, when return pump is operated to recirculate hot water in recirculation system.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.369-375
• /
• 2006

This paper describes a simple proportional and integral control algorithm for a swirl motor controller and its application. The control algorithm may be complicated in order to have desired performance, such as low steady state errors, fast response time, and relatively low overshoot. At the same time, it should be compact so that it can be easily implemented on a low cost microcontroller, which has no floating-point calculation capability and low computing speed. These conflicting requirements are fulfilled by the proposed control algorithm which consists of a gain scheduling proportional controller and an anti-windup integral controller. The mechanical friction, which is caused by gears and a return spring, varies very nonlinearly according to the angular position of the system. This nonlinear static friction is overcome by the proportional controller, which has a two-dimensional look up gain table. It has error axis and angular position axis. The integral controller is designed not only to minimize the steady state error but also to avoid the windup effect, which may be caused by the saturation of a motor driver. The proposed control algorithm is verified by use of a commercial product to prove the feasibility of the algorithm.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5763-5768
• /
• 2015

압력방출밸브는 높은 압력을 조절하여 안정성을 유지하는 기계적 요소로, 압력용기, 증발기, 파이프라인 등 사용되고 있다. 높은 압력이 발생되면 스프링의 탄성력을 사용하여 압력방출밸브의 출구로 유체를 흘려보냄으로써 압력을 낮추게 되고, 정상적인 압력으로 돌아오게 되면 압력방출밸브는 초기상태로 돌아가게 된다. 압력방출밸브는 순조롭게 작동되어지기 위하여 요구되는 구조적 안정성을 만족하도록 설계되어져야한다. 본 연구에서는 상업용 소프트웨어 ANSYS/WORKBENCH를 사용하여 압력방출밸브의 유동해석과 구조해석을 수행한 결과 구조적 문제를 발생시킨다는 것을 알 수 있었다. 따라서 구조적 안전성을 만족하는 설계를 수행하고, 설계변수에 따른 구조적 안전성을 예측해보고자 한다.

• 비교문화연구
• /
• 제33권
• /
• pp.287-307
• /
• 2013

One cat caused a big wave in Russian literature. This cat revived the heroine of Russian classics. Her light breath was scattered in the world, in the cloudy sky and in the cold spring wind about one hundred years ago. And the cat gave an opportunity of turning to Russian classics to Russian readers. Thanks to this cat, a Russian dreamer changed his typical thinking, as well as many ordinary readers start to read works of creator of this wonderful cat. Pelevin accomplished these works with one cat, which he has made. Of course "Nika" is not only caused to make readers to return to Russian classics. I think, the cat and "Nika" are the symbols of writer's purpose in Russian literature. In this study the understanding of "Nika" is following the steps of realization of writer's purpose. In the second chapter it is analyzed to the textual relationship between "Nika" and "Light breath". Apart from existing analyses to be emphasized the succession of thematic aspect of two works as well. Existence of observers to each heroine stress this succession of thematic aspect of two works. In the third chapter it is analyzed the use of technique of mystification in "Nika". This intentional use of mystification has been demanded to read a "Nika" from another point of view(internal speculation of hero-narrator). The purpose of writer was to expose the cognitive error of a human being. I think this purpose was effectively explained by Pelevin's Buddhist world view which was introduced in his several works.

• The Korean Journal of Ecology
• /
• 제25권5호
• /
• pp.359-364
• /
• 2002

시화지구 인공습지에 식재된 정수식물인 갈대(Phragmites australis)의 관리 방안을 모색하기 위해 갈대에 의한 질소 및 인 흡수 제거 양상과 갈대 생장과 관련된 토양 특성을 조사하였다. 습지 조성 초기에 갈대의 생장은 토양 염농도에 의해 저해된 것으로 나타났으며, 토양 유기물 함량은 갈대 비생육기 동안 고사체의 집적에 의해 증가하였지만, 서서히 분해되어 감소한 것으로 조사되었다. 갈대의 건물중과 질소 및 인 흡수량은 생장기인 여름과 가을에는 증가하였지만, 비생육기인 가을에는 감소하였다. 따라서 생장기 동안 갈대의 흡수에 의해 상당한 양의 질소와 인이 제거되었지만, 비생장기 동안 갈대 고사체의 형태로 토양에 환원되어 미생물의 분해에 의해 영양염류가 재방출될 가능성이 높은 것으로 판단되었다. 본 연구 결과에 의하면 인공습지 조성의 목적인 수질 정화와 생태공원으로서의 기능을 위해서는 갈대를 생육기간 중에 수확하는 방안을 적극적으로 모색해야 될 필요성이 있다.

• 농업과학연구
• /
• 제27권2호
• /
• pp.158-175
• /
• 2000

Up to date, the economic feasibility analysis on land consolidation and on-farm development projects were mainly depended upon the direct benefits from market value of project outputs. Therefore the projects were neglected in allocation of the government's financial funds and loans on account of undervaluation of the project benefits including socio-economic and environmental values of the projects. Accordingly the Extended Benefit Cost Analysis Method should be adapted to cover not only the benefits such as non-market values of environmental functions of the projects and but also the economic market values of the project outputs. The main objectives of this study is (1) to provision of the guideline for economic feasibility analysis based on the IBRD and ADB guidelines, (2) to estimate the benefits such as Productivity increase effect, labor saving effect, off-farm income increase effect during off-farm season, saving of O&M cost of farm mechanization, enhance of farmer's public health, increase of environmental public function of paddy fields, effect of food security and establishment of peaceful and uncontroversial rural society by implementing the land consolidation and on-farm development, (3) to introduce the newly adapted analytical method as the extended benefit cost analysis which could make possible the analysis of non-market goods such as the food security value and the environmental public value of paddy fields. To carry out the study, the publication on the guideline for economic analysis of agricultural projects were reviewed and consulted and for the post evaluation of the land consolidation and on-farm development project, field survey in Jeongja area were made for the feasibility study of the project by new method. According to the initial project plan, Jeongja land consolidation and on-farm development project has 96ha of benefit area and the project was started in 1989 and completed in the spring, 1990. The total project costs were amounted to 1,052 million won and the annual project benefits were estimated at 135.4 million in 1989 constant market prices. On the other hand, the newly estimated project benefits as a part of post evaluation of the project were amounted to 602.1 million won including all the benefits from the market and non-market commodities of the project as mentioned above column. The original IRP(Internal rate of return) of the project was estimated at 15.81%. On the other hand, the IRR of the post evaluation of the project was amounted to 16.83%. In case of including the benefit from the environment public function of paddy field, the SRR(Social Rate of Return) was reached to 38.81% and when we added the benefit from food security of the project, the SRR showed very high rate as 46.41%. In conclusion, the project were verified socio-economically feasible and environmentally sustainable considering the above decision making criteria.