• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.638-644
• /
• 1999

Workability time of superplasticized concrete is maintained generally for 30-60 minutes only. Therefore it is of great advantage for the concrete producer to use a high range water reducer which provides an extended slump life. Recently slump retentive srperplasticizer has been developed. Concrete mixing tests were done to know slump, setting, air content, bleeding and hardening characteristics of concrete using slump retentive superplasticizer. With slump retentive superplasticizer, high quality concrete was produced and slump loss of concrete was reduced in big way, making long transportation time possible as a practical alternative to on-site addition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.565-568
• /
• 2006

This study was retentive material into the porosities of the permeable asphalt concrete, we developed retentive asphalt concrete which can absorb water in rain and decrease the temperature of the pavement through the vaporization of rainwater. The experimental results showed that the maximum stability appeared in the 5.0% types of both AP-5 and SBS PMA. Between these two types, the maximum stability of the asphalt with AP-5 was 480kg, which means it met the stability requirement for walkways but didn't meet the requirement for roadways. On the other hand, the maximum stability of the asphalt concrete with SBS PMA was 676kg, which was 176 kg higher than the requirement for roadways(500kg) and satisfy the requirement of KS. The retentive material was 56.4% in the type of the retentive material with 30% diatomaceous earth, 66.6% in 50% type, 87.5% in 70% type. In the aspect of thermal properties, the retentive asphalt concrete can lower the surface temperature by about 15 degrees lower than the normal asphalt concrete can. This effect could be made by the evaporation cooling effect and the surface albedo. It should be noted that the evaporation cooling effect cools it by about 10 degrees and the surface albedo by about 5 degrees.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.19-27
• /
• 2011

This study was to draw a retentive concrete pavement that can reduce urban heat island which has become intensified according to the increase of buildings and paved roads. It used bottom ash, an industrial by-product that has retentive effect, as a replacement of fine aggregate. Meanwhile, in order to improve the decline of dynamic performance caused by bottom ash replacement, we manufactured specimen that metakaolin was added and we studied the characteristics of durable, ecological and retentive concrete through various experiments.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.187-192
• /
• 2017

This study evaluated the reduction performance of ambient temperature and the amount of evaporation that takes place depends on the temperature difference of paving blocks which are used in the sidewalk, roadway, parking lot, park, plaza, and etc. The water-retentive block of the LID (Low Impact Development) practice was compared with the conventional concrete block. For the quantitative performance evaluation, experiments were performed in a climatic environment chamber capable of controlling the climatic environment (solar radiation, temperature, humidity, rainfall, and snowfall). The method for performance evaluation was proposed using temperature, humidity, and ambient air of paving blocks which changes according to the solar radiation and the wind speed after the rainfall. As a result, the evaporation amount of the water-retentive block was 2.6 times higher than that of the concrete block, the surface temperature of water-retentive block was $10^{\circ}C$ lower than the concrete block, and the air temperature of water-retentive block was $4.6^{\circ}C$ lower than the concrete block. Therefore, it is analyzed that the water-retentive block with a large amount of evaporation is more effective in reducing the urban heat island phenomenon as compared with the concrete block.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.72-80
• /
• 2018

In this research, we tried to investigate the influence of concrete on cracks after applying to the actual construction site using the TPS construction method which can be easily charged by the mechanical injection method. To summarize the results, the following It is as follows. First, in the case of ultrasonic velocity, it can be seen that the ultrasonic wave passes rapidly at an average of about 36 mm / sec as compared with the syringe method when using the TPS method, and in the case of the injection depth, the syringe method In the case of TPS construction method, it showed an excellent tendency that 100% of the water retentive material was charged with all the formulations under a strong injection pressure. In the case of compressive strength, it was shown that the average was increased by 16.8% at the time of using the TPS construction method, and it was found to be structurally superior. Taken together, it is possible to confirm the behavior of the crack repairing agent by improving the quality by improving the strength and confirming the window installation by filling the injection material into the closed space at the crack site when using the TPS method compared with the syringe method. In addition, it is expected that construction time will be improved by shortening the construction period of about 5 days for the TPS construction method construction section 532 m, and usability will be expanded by the crack repair method of concrete structure.