• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• The Korean Journal of Pain
• /
• v.1 no.1
• /
• pp.64-73
• /
• 1988

Recent studios have shown that narcotic drags produce an unusually intense, prolonged and segmental analgesic action in man whoa injected into the spinal subarachnoid or epidural space (Wang et al, 1979; Behar et al, 1979; Cousins et al, 1979; Magora et a., 1980, Johnston and McCaughey, 1980). Since 1960, many investigators claimed that low molecular weight(LMW) dextran increased the clinical duration of lidocaine(Loder, 1960; Loder, 1962), tetracaine (Chinn and Wirjoatmadja, 1967) and bupivacaine(Kaplan et al, 1975) in man but the mechanism of the action of dextran was unclear. But Curtiss and Scurlock(1979), and Buckled and Fink(1979) claimed that LMW dextran has no effect on the duration of action of bupivacaine in animal studies. The present study was performed to evaluate the clinical efficacy of analgesia by the thoracic epidural injection of morphine and bupivacaine mixture for the relief of pain due to fractured or contused ribs, to evaluate the duration of analgesic effect by the use of the above mixture in a hypertonic solution(dextran 70 or 50% dextrose in water) and to observe the possibility of improvement in the lung function after the pain block. The complications following the pain block were also observed. The 50 single thoracic epidural injections of the mixture were divided into three groups : Group 1(n=15) served as a control group and drags used for the relief of pain were as follows(Mean$\pm$S.D.): morphine($2.13{\pm}1.64\;mg$), 0.5% bupivacaine($3.10{\pm}1.04\;ml$) and 0.9% saline($3.64{\pm}1.11\;ml$). Group 2(n=16) serves as an experimental group and drugs were as follows(Mean$\pm$S.D.): morphine($2.13{\pm}0.72\;mg$), 0.5% bupivacaine($3.06{\pm}0.77\;ml$) and dextran 70($3.75{\pm}1.29\;ml$). Group 3 (n=19) served as an experimental group and drags were as follows(Mean$\pm$S.D.) : morphine($2.42{\pm}0.51\;mg$), 0.5% bupivacaine($3.21{\pm}0.71\;ml$) and 50% dextrose in water($3.58{\pm}1.11\;ml$). The results are were follows: 1) The Dumber of patients who obtained excellent and good analgesic effects following the block were greater in the experimental Croup 2(94%) and Group 3 (90%) than theme of the control Group 1 (80%). 2) The duration of pain relief which lasted more than 3 days after the epidural block was longer in the experimental Group 2 (81%) and Group 3 (75%) than those of the control Croup 1(67%). 3) The pulmonary reserve(FVC%+FEV 1.0%) of 27 cases who were treated by the pain block between 1 and 31 drys following the chest injury was increased to about 13% than those before the block, and that of 13 cases between 32 and 82 days following the chest injury was decreased to about 4% than those before the block. 4) Of the complications following the pain block, there were 5 cased(10%) of nausea within 2 hours following the block, 4 cases(8%) of vomiting after 2 hours following the block, 10 cases(20%) of pruritus after 3~4 hours following the block, 17 cases(34%) of transient urinary retention which tasted 8 to 19 hours, 3 cases(6%) of headache within 2 hoers following the block and 2 cases(4%) of dural puncture. In conclusion, it is suggested that the clinical duration of analgesic effect produced by morphine and bupivacaine mixture can be prolonged by addition of the hypertonic solution to the mixture.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.279-290
• /
• 2005

Recently, as the serious damage caused by DDoS attacks increases, the rapid detection and the proper response mechanisms are urgent. However, existing security mechanisms do not effectively defend against these attacks, or the defense capability of some mechanisms is only limited to specific DDoS attacks. In this paper, we propose a detection architecture against DDoS attack using data mining technology that can classify the latest types of DDoS attack, and can detect the modification of existing attacks as well as the novel attacks. This architecture consists of a Misuse Detection Module modeling to classify the existing attacks, and an Anomaly Detection Module modeling to detect the novel attacks. And it utilizes the off-line generated models in order to detect the DDoS attack using the real-time traffic. We gathered the NetFlow data generated at an access router of our network in order to model the real network traffic and test it. The NetFlow provides the useful flow-based statistical information without tremendous preprocessing. Also, we mounted the well-known DDoS attack tools to gather the attack traffic. And then, our experimental results show that our approach can provide the outstanding performance against existing attacks, and provide the possibility of detection against the novel attack.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.243-248
• /
• 1998

Ark shell was known as shellfish that had hemoglobin as blood pigment and the action of mecidine, was consumed the great part of it as raw material, though it was produced about 13,000 M/T per year. Ark shell was processed the infinitesimal quantity as conned product, bout canned ark shell had problem that occurrenced discoloration after heat treatment during processing and storage. This discoloration mechanism during processing and storage was not cleared. This study was carried out to understand characteristics of the hemoglobin as blood pigment and carotenoid as meat pigment in ark shell and management of proper processing conditions for prevention of oxidation and discoloration by thermal treatment. When treated by digestion of 0.1% BHA, 0.1% Tenox-II, 0.5% Na2EDTA, 0.05% NDGA and 3% salt soln., 0.1% BHA solution was most suitable for stability of carotenoid that the retention ratio of carotenoids were 63.1% after heating to 116$^{\circ}C$ for 120 minutes. In preparation of canned ark shell and storage at 37$\pm$1$^{\circ}C$ for 60 days, the chemical composition, pH and salinity ere stable. And contents of total carotenoid were decreased slightly from 0.83mg% to 0.727mg%. The viable cell count were 6.92$\times$103 cfu/ml at raw ark shell, after processed and storage were not detected. The predominant amino acids in the raw ark shell were glutamic acid(19.7%), arginine(16.0%), glycine(12.6%), alanine(12.2%) and aspartic acid(7.6%). When 60 days stored, the contents of amino acid were stable. And the predominant nuclotide and their related compounds in the raw ark shell were hypoxanthine(2.14$\mu$mol/g), IMP(1.94$\mu$mol/g) and ATP(0.87$\mu$mol/g), and storage at 37$\pm$1$^{\circ}C$ for 60 days, the quantity order were same as raw material.

• The Journal of Dong Guk Oriental Medicine
• /
• v.4
• /
• pp.161-187
• /
• 1995

This study was perfomed to investigate causes of the senile hypotension, pathogenic mechanism, symptoms, and therapies through medical literatures, recent chinese medical literatures and chinese medical journals. The results are as follows ; 1. The senile hypotension has major symptoms of dizziness, weakness, syncope, palpitation, shortness of breath, and deficiency of Qi. Additionally, it has minor symtoms of letharhy, isomnia, tinnitus, amnesia etc... 2. The prodromal symptoms of Kwul and Kwul are relating to the symptoms of tachycardia, facial pallor, sweating, anxietas, ambiguous consciousness, and fainting. Weakness and dizziness due to deficiency make the symptoms of exhaustion, fatigue, vertigo, lethargy, and brachycardia. 3. The most principal cause of the senile hypotension is deficiency of Shen due to aging, congenital deficiency, and chronic illness. The rest of causes are defciency of Qi and blood, phlegm of retention, stagnation of Qi, blood stasis, blood prostration etc... In the view of the occidental meicine, the causes of the senile hypotension came from the reduction of cardiac output, the decretion of cardiovascular system's extention due to aging, hereditary factor, secondary factor due to exsanguination, diabetes mellitus, C.V.A etc..., and factor of neurogenic system's degeneration. 4. The principal pathogenic mechanisms are the insufficiency of Xing-Yang, the deficiency of Qi in middle jiao, and deficiency of Shen-Qi. The rest of mechanisms are the deficiency of both Qi and blood, stagnation of the Gan-Qi, and the deficiency of Gan and Shen. Zang-Pu Organs have something to do with Xing, Bi, and Shen. 5. As principal therapies, there are warming and recuperation the Xing-Yang, strengthing the middle-jiao and replenishing Qi, replenishing vital essence to tonify the Shen, and warming and recuperation the Shen-Yang. Additionally, the therapies of invigorating the Bi and relieving mental stress, strengthning the Bi and tonifing the Shen, invigorating Qi and nourishing Yin, soothing the Gan and regulating the circulation of Qi, and tonifing the Shen and nourishing the Gan help the cure of the senile hypotension. In prescriptions there are Baohe Yuan Tang, Buzhong Yigi Tang, Zuoguei Yin, Yougui Yin, Guipi Tang, Zhu Fu Tang, Shengmai San, Sini San, and Qi Ju Dihuang Wan. The medical herbs of Astragali Radix, Codonopsitis Pilosulae Radix, Ginseng Radix, Aconiti Tuber, Ephedrae Herba, Cinnamomi Ramulus, Cinnamomi Corfex Spissus, Zingiberis Rhizoma, Polygalae Radix, Liriopis Tuber, Polygonati Sibirici Rhifoma, Lycii Fructus, Schizandrae Fructus, and Glycyrrhizae Radix can be treated. 6. According to the clinical report, the principal causes are the deficiency of Qi, and insufficiency of Yang which symptoms are dizziness, vitality fatigue and acratia, amnesia, body cold and alger of extremity, spontaneous perspiration, and therady and weak pulse. It was improved by taking WenYang YiQi Tang, Zhu Fu Tang about 20-30 days. The improvement was shown on disappearance of subjective symptoms or the ascending of blood pressure to normal figure, and the rate of improvement was over 70%. 7. As regimens, taking warming and recuperating food(a sheep mutton, juglans regia, chiness date, longan aril etc...) and pungent food(chinese green onion, fress ginger, pipers fructns etc...), doing physical training, not being ill in bed at a long time, and preventing descent of blood pressure coming from sudden change of posture are needed. Additionally, the usage of diuretic, abirritant, and depressor needs to be extra cautious.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.53-62
• /
• 2017

Electric power which is the energy source of economy and industries requires long distance transportation due to regional difference between its production and consumption, and it is supplied through the multi-loop transmission and distribution system. Prior to its actual use, electric power flows through several transformations by voltage transformers in substations depending on the characteristics of each usage, and a transformer has the structure consisting of the main body, winding wire, insulating oil and bushings. A transformer fire that breaks out in substations entails the primary damage that interrupts the power supply to houses and commercial facilities and causes various safety accidents as well as the secondary economic losses. It is considered that causes of such fire include the leak of insulating oil resulting from the destruction of bottom part of bushings, and the chain reaction of fire due to insulating oil that reaches its ignition point within 1 second. The smoke detector and automatic fire extinguishing system are established in order to minimize fire damage, but a difficulty in securing golden time for extinguishing fire due to delay in the operation of detector and release of gas from the extinguishing system has become a problem. Accordingly, this study was carried out according to needs of active mechanism to prevent the spread of fire and block the leak of insulating oil, in accordance with the importance of securing golden time in extinguishing a fire in its early stage. A bushings fireproof structure was developed by applying the high temperature shape retention materials, which are expanded by flame, and mechanical flame cutoff devices. The bushings fireproof structure was installed on the transformer model produced by applying the actual standards of bushings and flange, and the full scale fire test was carried out. It was confirmed that the bushings fireproof structure operated at accurate position and height within 3 seconds from the flame initiation. It is considered that it could block the spread of flame effectively in the event of actual transformer fire.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2021

In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.