• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.123-130
• /
• 2022

Objective: To evaluate if a remote digital monitoring system added at the end of orthodontic treatment could positively influence the retention phase by reducing the occurrence of misfit of removable appliances, number of emergency appointments (EA), and orthodontic relapse. Methods: Twenty-seven patients who completed active orthodontic treatment were divided into the study and control groups. In addition to the standard chairside follow-up appointments at month 1 (T1), month 3 (T2), month 6 (T3), the study group patients were monitored using Dental Monitoring^® with monthly intra-oral scans. Occurrence of misfit of removable retainers, number of EAs, and intercanine width change were recorded for both groups. Differences in EAs and retainer fit were assessed using the chi-square test. Intra-group and inter-group differences in the intercanine width were assessed with Friedman test and Mann-Whitney U test, respectively (α = 0.05). Results: The study group showed a significantly lower occurrence of misfit of removable retainers (p = 0.027) compared to the control group. No significant inter- and intra-group difference was found in the EAs and intercanine width change at each time-point. Conclusions: Integrating remote monitoring systems, such as Dental Monitoring^®, to the retention phase of the orthodontic treatment may lower the occurrence of misfit of removable retainers. However, a small sample size and a short observation period limit the strength of this evidence. These preliminary results tentatively suggest that remote monitoring technologies may be beneficial, especially during the COVID-19 pandemic, when the regularity of in-office visits might be disrupted.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.875-884
• /
• 2012

Many Koreans have recently bleached their black hair to blond or a light color due to the influence of their favorite Korean idols. Bleaching effects were studied under various bleaching conditions, such as the concentration of oxidants, the ratio between bleach accelerant and oxidant, and treatment temperature and time. The degree of damage of bleached hair with the same color difference (${\Delta}E$) intervals was observed in SEM images, the retention of breaking load and the change of color after dyeing. The ratio between bleach accelerant and oxidant of 1:2.5 was an effective condition. $L^*$ values of the bleached hair treated with 9% oxidant increased to 90 min. At a treatment temperature of $30^{\circ}C$, $a^*$ values were maximum at 30 min and then decreased as time further increased; however, $b^*$ values of the bleached hair increased as the treatment time increased. At $45^{\circ}C$, both of $a^*$ and $b^*$ values showed a maximum at a specific time. Bleaching efficiency was influenced most by temperature, followed in order by time, and oxidant concentration. As the treatment time increased, $L^*$ values greatly increased with twice treatment; however, $a^*$ and $b^*$ values decreased. Bleached hair, which had a color difference of higher than 30, showed the scales were completely removed and the retention of the breaking load greatly decreased. Highly bleached hair showed a great decrease in $L^*$ values by dyeing; however, dyeing with bright colors was more indicative to the effect of bleaching.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.266-276
• /
• 2012

Salt, one of the main ingredients to make bread, functions differently according to environmental changes such as usage levels and methods. We examined the effects of yeast soaking time in about 8% salt solution on gas production and fermentation rate of dough and characteristics of white bread. Gas retention, related to gas production and fermentation rate, was the best at the 45 min soaking time. And pH of dough was appropriate to the fermentation in the range of 15 to 45 min of soaking time. Volume and specific volume of bread were best in 45 min soaking time(p<0.001), but the hardness of crumb texture analyzed with TA was the hardest among the samples(p<0.001). Brightness of color(L value) was significantly affected by soaking time(p<0.001), but b value was not considered. According to the preference test, the white pan bread made with 45 min soaking time in salt solution was preferred the most.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.289-291
• /
• 1989

• Korean Journal of School Psychology
• /
• v.18 no.1
• /
• pp.31-48
• /
• 2021

The purpose of this study was to determine whether the retention of university freshmen could be predicted using their peer relationships in a specific department. In this study, retention was defined as a student staying enrolled in their university for a certain period of time. Social relationships are formed through interaction between people, so both students' self-perceptions and others' perceptions of them must be accounted for, so we used a social network analysis that did so. We examined social networks visualizations that allowed for a rich interpretation of numerical information. Participants in this study were freshmen who enrolled in an undergraduate program in 2017, 2018, or 2019. We used the name generator method to determine how quantitative friendship network variables predicted the academic retention up to the first semester of 2020. Cox proportional hazard model analysis showed that the weighted indegree centrality with intimacy positively predicted retention. The results of this study can be used to identify and conduct interventions for students who may be likely to disenroll. However all of the students did not participate in the department, it was difficult to examine their entire peer networks. Thus, this study's results cannot be generalized because the participants are students of a specific major, so further research is needed to produce more generalizable results.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.29-35
• /
• 1999

Quantity and composition of biogas from semi-continuous anaerobic digestion of straw were obtained experimentally in laboratory scale digesters fed with 1 liter of 5% straw-water mixture and maintained at 35$^{\circ}C$. Experiments were carried out for hydraulic retention time(HRT) of 8, 10 and 15days, respectively. The amount and composition of biogas produced were measured until steady-state was achieved for each run. The amount of biogas and methane percent go through a maximum and decrease continuously towards the steady-state after three times operation of hydraulic retention time(HRT). Methane gas production rates at steady-state increase with the increasing of HRT. Biogas production of 0.45 liter/day with 25% methane, 0.42 liter/day with 33.7% methane and 0.492 liter/day with 31.7% methane were obtained for 8, 10 and 15days of HRT, respectively. The high proportion of soluble carbohydrates present in straw makes the volatile fatty acids to build up within the digester causing a drop in pH that inhibits digestion. Regular control of pH is therefore necessary by adding alkalinity. Reductions in COD increase with increase in HRT. The stratification of plant material within the digester is different from that of manure, and modifications in design and operation of digesters may be necessary if they are fed with plant matter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.1
• /
• pp.40-49
• /
• 2001

We have developed a repeatable process of forming uniform, small-size and high-density self-assembled Si nano-crystals. The Si nano-crystals were fabricated in a conventional LPCVD (low pressure chemical vapor deposition) reactor at $620^{\circ}c$ for 15 sec. The nano-crystals were spherical shaped with about 4.5 nm in diameter and density of $5{\times}l0^{11}/$\textrm{cm}^2$. More uniform dots were fabricated on nitride film than on oxide film. To take advantage of the above-mentioned characteristics of nitride film while keeping the high interface quality between the tunneling dielectrics and the Si substrate, nitride-oxide tunneling dielectrics is proposed in n-channel device. For the first time, the single electron effect at room temperature, which shows a saturation of threshold voltage in a range of gate voltages with a periodicity of ${\Delta}Ｖ_{GS}\;{\approx}\;1.7{\;}V$, corresponding to single and multiple electron storage is reported. The feasibility of p-channel nano-crystal memory with thin oxide in direct tunneling regime is demonstrated. The programming mechanisms of p-channel nano-crystal memory were investigated by charge separation technique. For small gate programming voltage, hole tunneling component from inversion layer is dominant. However, valence band electron tunneling component from the valence band in the nano-crystal becomes dominant for large gate voltage. Finally, the comparison of retention between programmed holes and electrons shows that holes have longer retention time.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.580-587
• /
• 2004

The objective of this research is to investigate the electrochemical oxidation process for nitrogen removal in wastewater involving chloride ion and nitrogen compounds. The process experiment of electrochemical oxidation was conducted by using the stainless steel tube type reactor and the $Ti/IrO_2$ as anode. Free chlorine production and current efficiency variation for total nitrogen removal was compared depending on whether electrolyte is added, and the nitrogen type distribution under an operating condition. When chloride was added as electrolyte, it was found that production of free chlorine increased and the concentration of the chloride decreased as retention time passed. The concentration of chloride in influent decreased from 1,660 to 1,198 mg/L at the current density of $6.7A/dm^2$, while concentration of free chlorine increased to 132 mg/L. Current efficiency in removal of ammonium nitrogen was increased when chloride was dosed as electrolyte. It was observed that ammonium nitrogen was oxidized to nitrite and nitrate through electrochemical oxidation and that the concentration of total nitrogen in influent was reduced from 22.58 to 4.00 mg/L at the short retention time of 168 seconds through the electrochemical oxidation of nitrogen.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.1
• /
• pp.13-17
• /
• 2017

Over 30% of domestic soil contamination has occurred via petroleum products and complex oil. Moreover, contamination by complex oil is more intense than it is by a single petroleum product species. In this study, we analyzed sectional TPH (total petroleum hydrocarbon) pattern and sectional ratio of current domestically distributed petroleum products, such as kerosene, diesel, bunker C, and lubricant and complex oils, to determine pollution characteristics of the soil. In the TPH pattern, kerosene, which is a light distillate, had an early retention time, and lubricant oil, which is a heavy distillate, had a late retention time in the gas chromatogram. In addition, we obtained a complexly contaminated soil via diesel and lubricant oil from the Navy and inspected it for its ratio of complex oil species. The inspection results showed that this soil was contaminated with 85% diesel and 15% lubricant oil. The method developed in this study could be used to determine complex petroleum sources and ratios at sites with accidentally contaminated soil.

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.523-532
• /
• 2000

The purpose of this study was to investigate the effects of the hydraulic retention time (HRT) and organic loading rate (OLR) on microbial characteristics and treatment efficiency in sewage treatment using aerated submerged biological filter (ASBF) reactor. This reactor combines biodegradation of organic substrates by fixed biomass with a physical separation of biomass by filtration in a single reactor. Both simulated wastewater and domestic wastewater were used as feed solutions. The experimental conditions were a temperature of 17 to $27^{\circ}C$, a hydraulic retention time of 1 to 9hr, an organic loading rate of 0.47 to $3.84kg\;BOD/m^3{\cdot}day$ in ASBF reactor. This equipment could obtain a stable effluent quality in spite of high variation of influent loading rate. Total biomass concentration. biofilm thickness and biofilm mass increased an exponential function according to the increasing OLR. The relationships between water content and biofilm density were in inverse proportion. The percentage of backwash water to influent flow was almost 9%. The separation efficiency of biomass was the percentage of 91 to 92 in ASBF reactor. The sludge production rates in feed solutions of simulated wastewater and domestic wastewater were 0.14~0.26 kg VSS/kg BODrem, 0.43~0.48 kg VSS/kg BODrem, respectively.