• Fibers and Polymers
• /
• 제7권3호
• /
• pp.305-309
• /
• 2006

This research studies the factors which influence the tensile strength of tire cords. Five yam samples are made by changing the spinning conditions and viscosity to get various physical properties. Different twisting methods are introduced and the yams are twisted under different processing conditions for each twisting process. With the experimental results, various analyses are performed to find the important factors in retaining strength after the twisting process. SEM and optical microscopic photographs are taken along with some measurements to assist the analysis.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.95-101
• /
• 2009

The generator for gas turbine power generation consists of the rotor which generates magnetic field, the winding coil which is the path for the field current and the wedge and retaining ring which prevents the radial movement of the coil. Relatively severe deformation was observed at the coil end section during the inspection of the generator for peaking-load operation, and the thermal-electricity and the centrifugal force were evaluated by the simple modeling of the windings to find the cause. But the simulation stress was not sufficient to induce the coil plastic deformation. The analysis result seems to be applicable to the base-load generators which runs continuously without shut down up to a year, but there had been more deformation than simulated for the generator which is started up and shut down frequently. The cause of the coil deformation was the restriction of the expansion and shrinkage. The restriction occurs when the winding coil shrinks, and the stress overwhelms the yield stress and cause the plastic deformation. The deformation is accumulated during the start-ups and shut-downs and the thermal growth occurs. The factors which induce the coil restriction during the expansion and shrinkage should be reduced to prevent the unallowable deformation. The resolutions are cutting off the field current earlier during the generator shut-down, modifying the coil end section to remove the stress concentration and making the insulation plate inserted between the coil end section and the retaining ring have the constant thickness.

• 지질공학
• /
• 제27권3호
• /
• pp.191-205
• /
• 2017

본 연구에서는 불투과형 사방댐과 링네트에 가해지는 충격하중을 평가하기 위해 토석류 모형축소실험을 수행하였다. 실험 결과, 토석류는 유체와 유사한 거동을 함에 따라 불투과형 사방댐 배면에 가해지는 토석류 충격하중은 하부구간이 4.14 kN로 가장 높게 작용하며 중간, 상부구간이 3.66 kN, 1.66 kN 가해지는 것으로 측정되었다. 링네트 실험결과 또한 불투과형 사방댐 결과와 같이 충격하중은 하부구간이 크며 상부로 갈수록 감소하는 경향을 보인다(2.28 kN, 1.95 kN, 1.49 kN). 수치해석 결과를 이용하여 토석류 흐름에 의한 토석류 방지시설 충격하중 흡수메커니즘을 분석한 결과, 불투과형 사방댐은 콘크리트 옹벽과 같이 구조물 자체의 강성을 이용하여 수평력에 저항하므로 실제 구조물에 작용한 수평력은 이론식과 유사한 결과가 제시되는 반면, 링네트는 강연선 탄성늘음과 네트 전면으로의 입자 투과를 이용하므로 충격하중은 사방댐 결과보다 최대 45% 감소하는 결과가 제시되었다.

• 한국지반공학회논문집
• /
• 제36권1호
• /
• pp.29-38
• /
• 2020

최근 환기구, 비상탈출용 수직구, 취수탑 가시설 등 지중 가물막이 또는 차수벽체로 원형 가물막이가 많이 적용되고 있다. 원형단면의 경우 벽체에 작용하는 토압이 원형가물막이 형상에 따라 아칭효과(arching effect)로 인하여 작용토압에 대한 구조체의 부재력이 감소하는 것으로 알려져 있다. 본 연구에서는 원형 가물막이에 대한 2D 유한요소해석(FEM)을 활용하여 원형띠장(ring beam) 강성을 산출 후 탄소성해석에 적용하여 부재의 단면력을 검토하였다. 더불어 3D 유한요소해석(FEM)을 통하여 원형단면의 가물막이가 다각형 형태의 가물막이보다 전단력, 휨모멘트, 그리고 발생변위가 최소값을 갖는 것으로 나타났으며, 이로써 원형단면 가물막이가 구조적으로 보다 효율적인 단면 형태임을 확인하였다

• 한국가구학회지
• /
• 제18권4호
• /
• pp.275-281
• /
• 2007

This study was carried out to know bending process property of bentwood by treatment methods such as microwave and ammonia solution treatment. Bentwood processing was operated on bending-jig form with 60mm and 100mm radius of curvature (ROC). The species was used to Korean red pine (Pinus densiflora). No significant difference was shown in bentwood processing method on ROC. In treatment method, ammonia solution treatment for bentwood was better in dimensional stability and working ability than that of microwave treatment. However, bentwood stress was reduced with ammonia solution treatment. Color of bentwood surface appearance has a dark tendency in ammonia solution treatment. But it seems to beautiful effect of apparent annual ring is rising esthetically by ammonia solution treatment. To utilize wood as a exterior material for living amenity, it has to be closely examined from various angles including surface property, degree of swelling and shrinkage, drying state, retaining strength, durability, safety, and insect damage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.163-165
• /
• 2002

High-speed permanent magnet machines are currently being developed for a number of applocations including gas-turbine generator sets and machine tools. Due to the high peripheral speed of the rotor and the relatively high conductively of the magnets used, rotor eddy current loss can be substantial. On the basis of analytical and finite element method, this paper deals with an analytical method for calculating eddy current losses in the rotor with permanent magnet and retaining ring.

• Journal of Chest Surgery
• /
• 제55권2호
• /
• pp.177-179
• /
• 2022

Barlow's disease with mitral annular calcification encompassing the subvalvular apparatus, including the valve leaflet and chordae, is extremely rare, and mitral valve repair in such cases is challenging. We report a case of a 60-year-old woman with mitral valve regurgitation that was successfully controlled by resecting the rough zone of P2 and calcifications on the excess leaflet regions and subvalvular apparatus, while retaining the calcification of P3 and implanting artificial chordae and an annuloplasty ring. Mitral valve repair for such cases requires an individualized and compounded surgical strategy for the technique to treat Barlow's disease and manage calcification to control mitral regurgitation.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.643-649
• /
• 2011

LNG 선박에 사용되는 초저온용 버터플라이 밸브의 개발에 있어, 누설검증은 가장 중요한 설계공정 중 하나이다. 초저온에서 누설방지가 가능한 실로서 인코넬 스프링과 같은 탄성지지체가 포함된 O-링 형태의 메탈실이 널리 사용되고 있으나, 제작비가 고가인 단점을 갖고 있다. 이에 대한 대안으로 부가적인 탄성지지체 없이도 누설조건을 만족시키며, 제작비가 저렴한 탄성 메탈실의 개발이 요구되고 있다. 본 연구에서는 탄성 메탈실의 누설방지를 위한 설계조건을 정립하여, 초저온 및 고압환경에서 누설방지가 가능한 탄성 메탈실의 형상을 수치해석을 통해 고찰하였다. 아울러 이를 기반으로 시제품을 개발하고, 상온 및 초저온 상태에서 BS6755 및 BS6364 에 준하는 누설시험을 실시하여 누설여부를 확인하였다.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1256-1261
• /
• 2015

Along with the increase of railway catenary system operation speed to 400 km/h, there have been growing demands for good quality current collection systems that satisfy quality standards as well as criteria for safe working. Retaining uniform elasticity tension of contact wires is essential in maintaining high quality contact between pantograph and OCL (Overhead Contact Line) of current collection systems in high speed railways. Therefore, the tension of contact wire must be kept within tight tolerance limits in both working conditions and adverse weather conditions of catenary system. In accordance with these conditions, this paper presents a real time monitoring system for the tensioning device of the newly installed catenary system on the special route of Honam high speed line for 400 km/h operation. For the verification of the true value of tension of contact wires, we have developed ring-type tensioning sensors which were installed on supporting points of mast which compose the catenary system. According to the field test performed on the Honam high speed line catenary system, variation of tension was measured accurately in real-time.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.184-191
• /
• 2003

New pyranone derivative, 2-((3E)-4(2H, 3H, -benzo[3, 4-d] 1, 3-dioxolan-5-yl)-2-oxo-but-3-enyloxy)-5-hydroxy-4H-pyran-4-one (Seletinoid $G^{TM}$), was designed as a novel retinoid on the assumption that the pyranone ring may mimic the carboxylic acid moiety in retinoid structure. The enolic hydroxy of pyranone at five position was easily deprotonated to form an enolate. The role of enolate was similar to that of carboxylic acid. To evaluate the value of Seletinoid G as an anti-aging ingredient, various tests were performed for example inhibitory effect for MMP-l expression, anti-oxidative activity, procollagen synthesis in hairless mouse and primary skin irritation. The result of this study suggested that our new synthetic retinoid could be used as a safe material for anti-aging cosmetics.