• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.731-736
• /
• 2001

In this thesis, the study on controlling of cracks of concrete box culvert in early ages is presented. The optimum construction method and economical analysis were proposed also through the experiment of the material and field test. As a result of the experiment of the material, using fly ash, CSA expansive agent and BELITE cement(type IV) showed good result in the control of cracks induced by heat of hydration and shrinkage. As a result of construction test analysis, the maintenance time of form system did not show a big difference in controlling of cracks. Control of distribution of reinforcement, spacing of expansion joint and use of BELITE cement showed big differences in the control of cracks in early ages. As a result of economical analysis, control of construction variables before construction can make it possible to reduce the repair expense.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.125-130
• /
• 2004

As an application of GPS is increased by world geodetic system introduction gradually, in this time, It is increased necessary of GPS baseline analysis program development. In this study, I developed a baseline analysis program by L1/L2 carrier. And I compared a baseline analysis result with a commercial program. I showed precision of approximately ${\pm}$1cm in a baseline length in case of Narrow lane as a result that a baseline analysised a developed program.

• East Asian mathematical journal
• /
• 제34권4호
• /
• pp.451-462
• /
• 2018

This study analyzed the learning components of the web-based adaptive math learning programs in order to develop adaptive math learning program using artificial intelligence. The components of the web-based adaptive math learning program set for analysis are classified into learning process presentation, concept learning, problem presentation, problem solving process, and learning result processing then analyzed three programs. As a result of analysis, the typical characteristic of components is that it uses a method of repeatedly presenting the same type of problem in order to learn one concept.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.39-42
• /
• 2005

Though full 3D analysis is the proper method to analyze the hybrid stepping motor (HSM), it has weak points in the areas of computation time and complexity. This paper introduces 2D FEA using a virtual magnetic barrier for the axial cross section to save computation time. For the purpose of 2D FEA, the virtual magnetic barrier and equivalent permanent magnet model of HSM are proposed. This result is compared with that of experimental and 3D analysis, considered as a reference result.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.145-148
• /
• 2015

The products to meet the requirement of are installed in nuclear power plant and the reliability target should be provided in the requirement. However, it is not easy to set a reliability target using quantitative analysis. The objective of this paper is to propose a method of reliability target setting considered warranty cost for process controller and then compare a reliability target with reliability analysis result.

• 한국임상보건과학회지
• /
• 제4권2호
• /
• pp.582-592
• /
• 2016

Purpose. For more effective hospital management, it analyzes the trend through general characteristics, balance sheet, income statement, and financial ratio analysis, grasps the causes of the problems, and analyzes management of the hospital in order to use the result as baseline data for development of the hospital in the future. Methods. The collected data of 3 years from 2011 to 2013 about 3 tertiary hospitals in metropolitan cities from Alio (provider of public institution information; www.alio.go.kr), Health Insurance Review & Assessment Service (www.hira.or.kr), and the website of the Ministry of Health and Welfare (www.mw.go.kr) were analyzed and general characteristics, balance sheet, income statement, and financial ratio, analysis are used as data. Results & Conclusions. From the result of data analysis from 2011 to 2013, general characteristics, balance sheet, income statement, financial ratio analysis, and pie charts could lead to conclusions as follows. In the result of comprehensive analysis, the 3 tertiary hospitals showed increase of fixed expense due to extension of the buildings and so did the scale of fund and asset. Although medical revenue increased, the margin of increase for medical expense was greater than that of medical revenue, which consequently led to loss. In prediction for the 3 tertiary hospitals based on characteristics so far, it is expected to see improved revenue structure after building extension is completed, but it is necessary to exert management effort to maintain its optimal level by enhancement in stability of management and inventory turnover through management of inventories.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.33-38
• /
• 2007

Recent, The propeller had high performance according as high performance of small ship. So, We has the development for azimuth thrusters. This Paper has structure improvement of steering support flange in azimuth thrusters. Steering support flange is very important part. because, Steering support flange supports all weight of azimuth thrusters. We has static & dynamic analysis of Steering support flange, and we discover the very safety. So, We has optimum design for the cost reduction. The first method of optimum design, We has the thickness reduce to 30mm from 5mm. Next method of optimum design, We had added stiffener. And we has the structure & dynamic behavior analysis. We had to dynamic behavior analysis. The first, We had to modal analysis. The result of 1st-modal analysis is that original model had to 76.48hz and new model had to 200.9hz. The second, We had to harmonic analysis. The result, We gave the thrust power to steering support flange. and We had to frequency analysis to $0{\sim}500hz$. The result, Deflection ration reduce to 16.64.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.64-75
• /
• 2003

Medical image segmentation is the process by which an original image is partitioned into some homogeneous regions like bones, soft tissues, etc. This study demonstrates an automatic medical image segmentation technique based on independent component analysis. Independent component analysis is a generalization of principal component analysis which encodes the higher-order dependencies in the input in addition to the correlations. It extracts statistically independent components from input data. Use of automatic medical image segmentation technique using independent component analysis under the assumption that medical image consists of some statistically independent parts leads to a method that allows for more accurate segmentation of bones from CT data. The result of automatic segmentation using independent component analysis with square test data was evaluated using probability of error(PE) and ultimate measurement accuracy(UMA) value. It was also compared to a general segmentation method using threshold based on sensitivity(True Positive Rate), specificity(False Positive Rate) and mislabelling rate. The evaluation result was done statistical Paired-t test. Most of the results show that the automatic segmentation using independent component analysis has better result than general segmentation using threshold.

• 융합경영연구
• /
• 제10권6호
• /
• pp.1-7
• /
• 2022

Purpose: The purpose of this study is identifying the research trends of degree papers related to the beauty industry and providing information which can contribute to the development of the domestic beauty industry and the direction of various research about beauty industry. Research design, data and methodology: This study used 154 academic papers and 189 academic papers with English abstracts out of 299 academic papers. All of these papers were found by searching for the keyword "beauty industry" in ScienceON on August 15, 2022. For the analysis, BERTopic and LDA (Latent Dirichlet Allocation) analysis were conducted using Python 3.7. Also, OLS regression analysis was conducted to understand the annual increase and decrease trend of each topic derived with trend analysis. Results: As a result of word frequency analysis, the frequency of satisfaction, management, behavior, and service was found to be high. In addition, it was found that 'service', 'satisfaction' and 'customer' were frequently associated with program and relationship in the word co-occurrence frequency analysis. As a result of topic modeling, six topics were derived: 'Beauty shop', 'Health education', 'Cosmetics', 'Customer satisfaction', 'Beauty education', and 'Beauty business'. The trend analysis result of each topic confirmed that 'Beauty education' and 'Health education' are getting more attention as time goes by. Conclusions: The future studies must resolve the extreme polarization between the structure of the small beauty industry and beauty stores. Furthermore, the researches have to direct various ways to create the performance of internal personnel. The ways to maximize product capabilities such as competitive cosmetics and brands are also needed attentions.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권2호
• /
• pp.49-56
• /
• 2021

Purpose: This study aims to provide a way to improve hospital satisfaction through improvement of hospital bulletins based on the analysis of the actual condition of hospital bulletins and satisfaction analysis for patients. Methods: First, a case study is conducted. After setting the analysis items based on previous studies and case study, a satisfaction survey is conducted on patients and statistical analysis is performed. Results: As a result of factor analysis, factors were classified into four categories: legibility, visibility, effectiveness, and frequency. As a result of the importance analysis through multiple regression analysis of four factors affecting hospital satisfaction, the importance of the "legibility" factor was the highest, followed by the "frequency", "effectiveness", and "visibility". As a result of the satisfaction analysis of the bulletins in the study site, the "visibility" factor was the highest, followed by "legibility", "effectiveness", and "frequency". Implications: In order to improve hospital satisfaction, the improvement of factors of high importance should be considered first. In other words, in hospital bulletins, legibility and frequency should be considered first. In addition, hospital satisfaction can be maximized by improving the level of factors and variables that are low in the satisfaction survey by factor.