• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.699-701
• /
• 2001

The expert system monitoring and diagnosing 765kV power apparatus was described in this paper. To develop this expert system, we studied the knowledge bases and data bases for 765kV transformer and GIS. In order to make the reliable inference of knowledge base and the good MMI(Man Machine Interface), the data bases were consisted of the tables of power apparatus information, limit level value, measured input data, inference result and diagnosis result. The knowledge base had various rules to infer the conditions of transformer and GIS. We applied both the forward chaining and backward chaining methods to these rules of system for good inferences. This paper describes the applied methods for expert system. Also, this developed system was tested with dissolved gas analyzing result and the result was shown.

• Journal of Welding and Joining
• /
• v.19 no.5
• /
• pp.492-498
• /
• 2001

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.561-564
• /
• 1998

This paper evaluated autonomic nervous system function in 23 patients with syncope and a positive tilt test result, 21 with a negative test result, and 19 healthy controls. Indexes of heart rate variability were measured during supine resting, immediately afte rtilt-up, standing rsting, immediately before syncope and immediately after tiltdown. There were no significant differences among the groups in any of the indexes of heart rate varability over the 24-hour holter recordings. In patients with a positive tilt result, tilting gaused a decrease in low-frequency (LF) immediately before syncope and incsrease in high-frequency (HF) bands immediately before. In patients with a negative tilt result, tilting caused a decrease in low-frequency (LF) immediately before syncope and decrease in high-frequency (HF) bands immediately before, different from positive tilt results. Our findings showed that patients with vasovagal syncope have no chronic differences from normal subjects in autonomic nervous system activity, but that these patients respond differently to the orthostatic stimulus.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.43-46
• /
• 2000

Optical triangulation displacement sensors(0TDSs) are widely used for their simple struchlre, high resolution, and long operating range. However, there are several factors that must be taken into account in order to obtain high accuracy and reliability Measurement errors from inclinations a？ an object surface, prohe signal fluctuations generated by speckle effects. power vanation of a light source, electronic noises, and so on. Previous models of OTDSs can not show reasonable behavior as change of surface inclination and shape of light intensity distribution on the detector. In this paper, we propose a new and reasonable modeling for diffise-type OTDSs based on a geometrical optics. To verify propriety of new modeling, we take basic experiments. Shape of light intensity distribution is asymmetric in both simulation result and experimental result. Both simulation result and experimental result show same tendency of light intensity distribution movement as changing surface inclination

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.7-18
• /
• 2008

Modern Museum has duplication which are non-profitability for public service and profitability for good service to visitors. Museum must have revenue source in order to provide a good service. It is necessary Museum do marketing for benefit Enterprise. In this Paper, we study empirical of Museum Marketing Activation which are introduced Quality Management. We prove four hypothesis which are (1)As professional manpower operation is high, Museum Performance result may rise, (2)Operation conformation is no impact in Museum management result, (3)If quality management operation are introduced, Museum Performance result may rise, (4)As there is much contents of Museum, Museum Performance result may rise.

• Culinary science and hospitality research
• /
• v.23 no.5
• /
• pp.187-198
• /
• 2017

The purpose of the study was to investigate the relationships among leadership, organizational commitment and management performance of restaurant workers from the Busan Haeundae area. Normally, each leadership type(transactional leadership, transformational leadership, servant leadership) effected organizational commitment and management result. For the field test and verification, 200 staffs of the Haeundae restaurant participated in the survey from April 1st to May 30th, 2017. The research result was summarized as follows. First, all leadership types(transformational leadership, transformational leadership, servant leadership) of Haeundae restaurant staffs had a positive impact on affective involvement. Second, transformational leadership and transactional leadership of restaurant staffs had a positive influence on continuous commitment. Lastly, continuous commitment of restaurant staffs in Haeundae affected management result. In conclusion, precedent study explained only hotel investigation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.535-538
• /
• 2005

The problem of the crack which occures from the reinforced concrete structure. could be caused by the complexed factors. When the crack happen, it caused fatal blemish to manage and maintain the structure such as structural problem, licking, spalling, viewing Even though they study and work hard to solve this kind of problem in the world, there are no countermeasure for perfect prevention of crack. After the crack checked out, a method of repair-reinforcement has been sutdied and operated actively. In this experiment, studied durability of repair material. Experiment wave and durability of epoxy and urethane's were shown good result, and micro cement's durability displayed result that is not good. Result of a repeat tired experiment displayed result that micro cement is bad.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.555-562
• /
• 2005

In this study, we tried to establish the method of evaluating the tensile properties of the ring specimen of Arsene which have gauge length. In this result, we verified the availability of central piece. We made ring specimens and devices such as central piece, pins, and clevises. A proper tensile speed was determined by pre-test. The result of main test was calibrated and compared with the result of FEM. To obtain the tensile properties from the ring test result, we observed two relationships: one is strain-displacement and the other is load ratio-displacement. The tensile properties could be evaluated by using these relationships.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.80-85
• /
• 2012

The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure. Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.102-108
• /
• 2013

In this study, the experiment result and numerical analysis on temperature distribution of a secondary battery module for high temperature operation type were compared. Because experimental battery has been in danger of explosions, experiment on temperature distribution was carried out using dummy batteries. Study on NAS battery module, which is secondary battery of high temperature operation type, is as follows ; Test result showed that battery's temperature is in steady state uniformly after 8 hours in each section. It is similar to experimental result for temperature distribution from the result of numerical analysis, and it takes about 8.5 hours to the $300^{\circ}C$.