• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.3
• /
• pp.96-106
• /
• 2009

Extending the scale of the distributed processing in a single Ethernet cluster is physically restricted by maximum ports per switch. This paper presents an implementation of MPI-based multicluster consisting of multiple Ethernet switches for extending the scale of distributed processing, and a asymptotical analysis for communication overhead through execution-time analysis model. To determine an optimum task partitioning, we analyzed the processing time for various partitioning schemes, and AAP(accumulator array partitioning) scheme was finally chosen to minimize the overall communication overhead. The scope of data partitioned in AAP was modified to fit for incremented nodes, and suitable load balancing algorithm was implemented. We tried to alleviate the communication overhead through exploiting the pipelined broadcast and flat-tree based result gathering, and overlapping of the communication and the computation time. We used the linear pipeline broadcast to reduce the communication overhead in intercluster which is interconnected by a single link. Experimental results shows nearly linear speedup by the proposed parallel distributed GHT implemented on MPI-based Ethernet multicluster with four 100Mbps Ethernet switches and up to 128 nodes of Pentium PC.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1428-1436
• /
• 2016

A multipath routing in wireless sensor networks (WSNs) provides advantage such as reliability improvement and load balancing by transmitting data through divided paths. For these reasons, existing multipath routing protocols divide path appropriately or create independent paths efficiently. However, when the sink node moves to avoid hotspot problem or satisfy the requirement of the applications, the existing protocols have to reconstruct multipath or exploit foot-print chaining mechanism. As a result, the existing protocols will shorten the lifetime of a network due to excessive energy consumption, and lose the advantage of multipath routing due to the merging of paths. To solve this problem, we propose a multipath creation and maintenance scheme to support the mobile sink node. The proposed protocol can be used to construct local grid structure with restricted area and exploit grid structure for constructing the multipath. The grid structure can also be extended depending on the movement of the sink node. In addition, the multipath can be partially reconstructed to prevent merging paths. Simulation results show that the proposed protocol is superior to the existing protocols in terms of energy efficiency and packet delivery ratio.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.75-84
• /
• 2018

Thermal stress of livestock has been issued due to recent climate change trends and this causes reproductive disorders, decreased feed consumption, immunosuppression, and increased mortality of animals. Concept of THI has been widely used to quantitatively evaluate the degree of thermal stress for animals, however use of this concept is restricted for animals living in the enclosed facilities such as mechanically ventilated broiler houses. In this study, time-based internal energy flow and variation trends of temperature and humidity were analyzed based on BES technique. Local weather data, insulation characteristics of building materials, heat and moisture generation rate from broilers according to age, algorithm of ventilation operation were adopted for boundary condition of the model to accurately compute THI values inside the mechanically ventilated broiler house. From the BES computation, excess frequency of THI threshold in Jeju city was highest on the assumption that air conditioning equipments were not installed. When general raising density ($39kg\;m^{-2}$) was adopted, total 2,191 hours were exceeded. Excess hours of THI threshold were strongly related to the cumulative air temperature ($R^2=0.87$).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.15-24
• /
• 2012

In this paper, we suggest the dynamic-response-free SMPS using a new high-resolution DPWM generator based on switched-capacitor delay technique. In the proposed system, duty ratio of DPWM is controlled by voltage slope of an internal capacitor using switched-capacitor delay technique. In the proposed circuit, it is possible to track output voltage by controlling current of the internal capacitor of the DPWM generator through comparison between the feedback voltage and the reference voltage. Therefore the proposed circuit is not restricted by the dynamic-response characteristic which is a problem in the existing SMPS using the closed-loop control method. In addition, it has great advantage that ringing phenomenon due to overshoot/undershoot does not appear on output voltage. The proposed circuit can operate at switching frequencies of 1MHz~10MHz using internal operating frequency of 100 MHz. The maximum current of the core circuit is 2.7 mA and the total current of the entire circuit including output buffer is 15 mA at the switching frequency of 10 MHz. The proposed circuit has DPWM duty ratio resolution of 0.125 %. It can accommodate load current up to 1 A. The maximum ripple of output voltage is 8 mV. To verify operation of the proposed circuit, we carried out simulation with Dongbu Hitek BCD $0.35{\mu}m$ technology parameter.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.138-156
• /
• 2004

GPR(Ground Penetrating Radar) was used for imaging the interior of the historical masonry such as stone pagoda in order to provide the basic information of safely inspection. The scope of the imaging was restricted to the foundation part of stone pagoda that transferred the load of the pagoda to the ground. Kirchhoff migration and traveltime tomography was used for imaging the outer stone and the inside of stone pagoda, respectively. From the migrated images, we could measure the thickness and the shape of the boundaries of the outer stone in the foundation part. From the reconstructed tomograms for the physical model, we could get the GPR propagation velocity distribution and exactly find the position of the air in the model and calculate the average velocity with respect to the different filling materials. The properties and the shape of the interior materials of stone pagoda can be basic informations for the safety inspection.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.531-542
• /
• 2002

An input and output buffering ATM switch conventionally operates in either Queueloss mode or Backpressure mode. Recently, a new mode, which is called Hybrid mode, was proposed to overcome the drawbacks of Queueloss mode and Backpressure mode. In Hybrid mode, when both the destined output buffer and the originfted input buffer are full, a cell is dropped. This thesis analyzes the cell loss rate and the cell delay of Queueloss, Backpressure and Hybrid modes in a switch adopting output-port expansion scheme under uniform traffic. Output-port expansion scheme allows only one cell from an input buffer to be switched during one time slot. If several cells switch to a same destined output port, the number of maximum transfer cells is restricted to K (Output-port expansion ratio). The simulation results show that if an offered load is less than 0.9, Hybrid mode has lower cell loss rate than the other modes; otherwise, Queueloss mode illustrates the lowest cell loss rate, which is a different result from previous researches. However, the difference between Hybrid and Queueloss modes is comparably small. As expected, the average cell delay in Backpressure mode is lower than those of Queueloss mode and Hybrid mode, since the cell delay due to the retransmission of higher number of dropped cells in Backpressure mode is not considered.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.3
• /
• pp.260-272
• /
• 2001

All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use of all-ceramic crowns to anterior applications where occlusal loads are lower. But there has been increasing interest in all-ceramic restorations because patients are primarily concerned with improved esthetics. Many efforts have been made to in prove the mechanical properties of dental ceramics. This study was designed to elucidate the influence of the luting agent on the strength of the Empress 2 crown (staining technique) cemented on human teeth. Seventy extracted human permanent molar teeth were chosen. Teeth were prepared for Empress 2 crowns with milling machine on a surveyor. A dental bur was placed in the mandrel that was positioned so that the long axis of the bur was perpendicular to the surveyor base. Dimensions of the Empress 2 crown preparation were $6^{\circ}$ taper on each side, $1.5{\pm}0.1mm$ shoulder margin, and 4mm crown height. The luting cements used in this study were as follow: 1. Uncemented 2. Zinc phosphate cements (Confi-Dental) 3. Conventional glass ionomer cement : Fuji 1 (GC) 4. Resin-modified glass ionomer cements : Fuji plus (GC) 5. Adhesive cements : Panavia F (Kuralay), Variolink II (Vivadent), Choice (Bisco). Fracture test using Instron. The crowns were loaded in compressive force to evaluate the effect of these cements on the breaking strength of these all-ceramic crowns. A steel ball with a diameter of 4mm was placed on the occlusal surface and load was applied to the steel ball by a cylindrical bolt with a crosshead speed of 0.5mm per minute until fracture occurred. The fractured surface was examined using Scanning Electron Microscopic Image (SEM) to discover the correlation between fracture strength and bonding capacity. Within the limitation of this in vitro study design, the results were as follows : 1. fomentations significantly increased the fracture resistance of Empress ceramic crowns compared to control. Uncemented (206.9 N): ZPC (812.9 N): Fuji 1 (879.5 N): Fuji Plus (937.7 N): Choice (1105.4 N): Variolink II (1221.1 N): Panavia F (1445.2 N). 2. Resin luting agent, treated by a silane bond enhancing agents, yielded a significant increase in fracture resistance. In some of the Panavia F group, a fracture extended into dentin. 3. According to SEM images of fractured Empress crowns, the stronger the bond at both interfaces(crown and die), the more fracture strength was acquired.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.29-46
• /
• 2014

For circular rigid footings with a rough base on sand, combined vertical - horizontal loading capacity was studied by three-dimensional numerical modelling. A numerical model was implemented to simulate the swipe loading and the probe loading methods and an interpretation procedure was devised in order to eliminate the numerical error from the restricted mesh density. Using the Mohr-Coulomb plasticity model, the effect of friction angle was studied under the associated flow-rule condition. The swipe loading method, which is efficient in that the interaction diagram can be drawn with smaller number of analyses, was confirmed to give similar results with the probe loading method, which follows closely the load-paths applied to real structures. For circular footings with a rough base, the interaction diagram for combined vertical (V) - horizontal (H) loading and the inclination factor were barely affected by the friction angle. It was found that the inclination factors for strip and rectangular footings are applicable to circular footings. For high H/V ratios, the results by numerical modelling of this study were smaller than the results of previous studies. Discussions are made on the factors affecting the numerical results and the areas for further researches.

• Journal of Nutrition and Health
• /
• v.40 no.7
• /
• pp.593-600
• /
• 2007

Recent studies described the ${\varepsilon}4$ allele of apoE confers a two-to fourfold increased risk for late-onset Alzheimer#s disease (LOAD), but LOAD pathology does not all fit neatly around apo E. Therefore, the goal of this study was to find the association between Alzheimer and apo E4 genotype in the 107 elderly between 50 to 64 years old who visited to FHWC of Sungshin Women#s University. We conducted the questionnaire survey (general & 24 hr dietary recall), anthropometerics (BP, waist & BMI) and blood biochemistry (FBS & lipid profiles). LDL-c and HOMA-IR were calculated by Friedwald#s and Matthew#s formulas. The apo E genotyping was performed by PCR-RFLP method and subjects were divided into three allele groups (${\varepsilon}3$; wild, ${\varepsilon}2$ & ${\varepsilon}4;$ mutants). The apo E allele frequencies were 7.0% for the ${\varepsilon}2$, 83.6% for the ${\varepsilon}3$ and 9.3% for the ${\varepsilon}4$. In comparison with biochemistry characteristics by apo E genotype, FBS was significantly higher in ${\varepsilon}4(129.2{\pm}6.8)$ than that in the others (${\varepsilon}2$: $117{\pm}7.4$, ${\varepsilon}3$: $107.3{\pm}2.2)$ (p<0.01). More than forty percents of ${\varepsilon}4$ group shown the dyslipidemia [high TG (>150mg/dl) & low HDL (<40 mg/dl:male or <50 mg/dl: female)]. The cytokines levels such as IL-1 ${\beta}$, IL-6 and $TNF-{\alpha}$ were not different among three apoE alleles. After the adjusting sex, age & dietary fiber, LDL-c level was siginificantly higher in ${\varepsilon}4$ ($108.3{\pm}7.7$) than that in ${\varepsilon}2$ ($100.4{\pm}8.4$) (p<0.05). According to food intake and the recipe on the basis of 24 hr dietary recall, the elder]y with ${\varepsilon}4$ allele took higher intake frequency of the light -colored vegetable (radish, onion & cabbage) and pan-fried foods (sauteed beef and vegetables, stir-fried vienna with vegetables) than the others. We knew that the elderly with ${\varepsilon}4$ allele had been restricted the calories intakes with high dietary fiber (33.6+2.5 g/d) to maintain the normal level of FBS and LDL-c. On next study, the prevalence of Alzheimer#s disease in this population who has ${\varepsilon}4$ allele on the condition of calories restriction will be continually follow-up.