• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.389-392
• /
• 2009

The application of an equivalent drawbead model(EDM) for sheet metal forming analysis, which adopts the forces instead of complex geometries in modeling the drawbead, to the numerical simulation of auto-panel stamping process is introduced in this study. In terms of the thinning and draw-in, better agreement with experimental measurements was found in EDM than in commercial code models so that the excellence of EDM in the accuracy of drawbead forces for the simulation of auto-body stampings was revealed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.309-315
• /
• 1996

An analysis is presented on the stability of elastic cantilever column subjected to uniformly distributed follower forces as to the influence of the elastic restraints and a tip mass at the free end. The elastic restraints are formed by both the translational and the rotatory springs. For this purpose, the governing equations and boundary conditions are derived by using Hamilton's principle, and the critical flutter loads and frequencies are obtained from the numerical evaluation of the eigenvalue functions of this elastic system. The added tip mass increases as a whole the critical flutter load in this system, but the presence of its moment of inertia of mass has a destabilizing effect. The existence of the translational and rotatory spring at the free end increases the critical flutter load of the elastic cantilever column. Nevertheless their effects on the critical flutter load are not uniform because of their coupling. The translational spring restraining the end of cantilever column decreases the critical flutter load by coupling with a large value of tip mass, while by coupling with the moment of inertia of tip mass its effect on the critical flutter load is contrary. The rotatory spring restraining the free end of cantilever column increases the critical flutter load by coupling with the tip mass, but decreases it by coupling with the moment of inertia of tip mass.

• 소음진동
• /
• 제7권1호
• /
• pp.91-97
• /
• 1997

An analysis is presented on the stability of an elastic cantilever column having the elastic restraints at its free end, carrying an added tip mass, and subjected to uniformly distributed follower forces. The elastic restraints are formed by both a translational spring and a rotatory spring. For this purpose, the governing equations and boundary conditions are derived by using Hamilton's principle, and the critical flutter loads and frequencies are obtained from the numerical evaluation of the eigenvalue functions of this elastic system. The added tip mass increases as a whole the critical flutter load of the elastic cantilever column, but the presence of its moment of inertia of mass has a destabilizing effect. The existence of the translational and rotatory springs at the free end increases the critical flutter load of the elastic cantilever column. Nevertheless, their effects on the critical flutter load are not uniform because of their coupling. The translational spring restraining the free end of the cantilever column decreases the critical flutter load by coupling with a large value of tip mass, while by coupling with the moment of inertia of tip pass its effect on the critical flutter load is contrary. The rotatory spring restraining the free end of the cantilever column increases the critical flutter load by coupling with the tip mass, but decreases it by coupling with the moment of inertia of the tip mass.

• Advances in Computational Design
• /
• 제1권1호
• /
• pp.105-117
• /
• 2016

The objective of this work is to study the restraining effect in fire resistance of framed structures and to evaluate the global response of reinforced concrete frames when exposed to fire based on advanced finite element method. To study the response a single portal frame is analyzed. The effect of floor slab on this frame is studied by modeling a beam-column-slab assembly. The evolution of temperature distribution, internal stresses and deformations of the frame subjected to ISO 834 standard fire curve for both the frames are studied. The thermal and structural responses are evaluated and a comparison of results of individual members and entire structure is done. From the study it can be seen that restraining forces has significant influence on both stresses and deflection and overall response of the structure when compared to individual structural member. Among the various structural elements, columns are the critical members in fire and failure of column causes the failure of entire structure. The fire rating of various structural elements of the frame is determined by various failure criteria and is compared with IS456 2000 tabulated fire rating.

• Tribology and Lubricants
• /
• 제31권4호
• /
• pp.170-176
• /
• 2015

As a continuation of Part I, which developed a design formula of the minimum corner radius (R_min) for restraining tribological failures, Part II investigates design parameters such as material properties and contact force. As design examples, Al 7075-T651, SST 304 and HT-9 are chosen for the materials and 1, 10 and 100 kN are used for the forces. The results show that the difference in R_min decreases as either the elastic modulus increases or the contact force decreases. Given the same material and force, the permissible R_min decreases as the flat region increases and vice versa. Because the R_min values obtained from the examples are very small, the dimensions of the corner radius normally designed in engineering structures are regarded acceptable. The von Mises stress evaluated for a typical example, which is far below the yield strength, confirms this interpretation. Nevertheless, the present work can provide a design criterion as well as a guideline for quality control in the manufacturing of, in particular, contact corners, which has not been attempted before to the best of the author’s knowledge. In addition, this paper considers the problem of a step that may be formed in the contact contour by using a similar approach. The result shows that no size of the step is permissible.

• 대한간호학회지
• /
• 제13권2호
• /
• pp.22-43
• /
• 1983

1. Need for and Purpose of the Study. There is an increasing demand for curriculum improvement of the Korean Army Nursing Academy (KANA), since it was upgraded into 4-year institution of higher learning from 3-year one. In particular, it is strongly advocated that the KANA needs the outside expertise for its curriculum improvement-namely not only from the internal military view of points but also from the viewpoints of professional educational society, In line with such a necessity for the study, this study was aimed at 1) analyzing the current actual practices of KANA'S curriculum, 2) investigating the desired practices of KANA'S curriculum, and 3) identifying the discrepancy between the actual and desired practices of curriculum. 2. Problems for the Study This study had 4 problems to be answeared as follows: 1) What are the actual curriculum practices of KANA? 2) What are the desired curriculum practices of KANA? 3) How are the extents of perception of actual and desired curriculum different in four groups (student, faculty & administrator, nurse, and medical doctor in militay hospital) ? 4) What are the restraining forces that impede the change from actual to desired curriculum practices? 5) What are the relationships of curriculum component,』 in actual and desired curriculum practices? 3. Methods and Procedures This study was conducted by means of document analysis in addition to literature review and by means of needs assessment questionnaire which was developed by the researcher. The questionnaire included 62 statments with 7 questions for demographic data collection. The needs assessment questionnaire was managed to a total of 243 subjects (100 students, 46 faculty & administrators, 55 nurses, and 42 medical doctors), The collected data were treated using SPSS computer system so as to calculate mean scores, standard deviations, and correlation coefficients. The significance test was made through t-test and one-way ANOVA. The statistical significance level was set at both .05 and .01 level. 4. Major findings The major findings in this study are as follows: 1) The score of desired practices was significantly greater than that of actual practices, representing a strong need for curriculum betterment. 2) There were significant differences in the perceptions of actual practices as well as desired practices among four groups (student, faculty & administrater, nurse, and medical doctor). 3) The most frequently selected restraining forces were army's inherent character, economical limitation, and educational expertise limitations. 4) Such variables as sex, position attachment to the KANA and grade made a statistically significant effect on the perception of desired curriculum practice, while the variables like marrige, position, and military class made it on the perception of actual curriculum practice. 5) The coefficients among the curriculum components were lower in perception of the actual curriculum practices than those in the desired practices. 5. Conclusions The conclusions based on the major findings of this study are as follows: 1) The current curriculum development procedure of the KANA is not consistent with the theoretical frame of systematic development sarategy of curriculum. 2) There are wide conflicts among the groups who are supposed to participate in curriculnm development, concerning the actual and desired practices of KANN'S curriculum. 3) A great deal of need for curriculum improvement for the KANA is clearly felt, and in particular, in the process of teaching and learning. 4) Each component of curriculum is not intergrated into a whole development procedure, being segregated each other. 5) For better curriculum improvement, such restraining forces as financial and professional limitations should be eliminated. 6. Recommendations 1) For Further Research a. There is a need to replicate this study after in-depth statistical analysis of each item of need assessment questionnaire, and with more representative subjects. b. A study should be conducted which. has its focus on the analysis of restraining forces for the change from actual to desired curriculum practices of the KANA. 2) For KANA'S Curriculum Improvement a. There is a need to promote the professional expertise of the participants in curriculum development and the communication among them. b. It is desirable to establish an institution or section of administration, which is soley in charge of curriculum development. c. To better develop KANA's curriculum not only faculty and administrators but also students should be encouraged to participate in development process, while the military medical doctors' participation should be carefully considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.266-269
• /
• 2003

This paper is concerned with a forming analysis of front side members and the application of the forming effect in crash analysis of auto-body. Drawbead restraining forces are calculated with ABAQUS/Strandard in order to identify the boundary condition in forming process. Forming analysis with equivalent drawbead is carried out with LS-DYNA3D. In order to demonstrate the validity of the forming analysis, quantitative comparison of the thickness variation between the real product and the numerical simulation result is carried out. Forming histories obtained from the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.50-54
• /
• 1997

An expert drawbead model is developed to model a cranky drawbead in the finite element analysis of stamping processes. The expert model calculates the drawbead restraining forces (DBRF's) and bead-exit thinning, which are boundary conditions. DBRF's are calculated by considering bending force, unbending force, and friction force in order. Bead-exit thinning are due to the bending and tension during the deformation. The DBFR's and thinning computed form the mathematical model for the basic beads are compared with measurements and correction factors compensating for the differences are found using the multiple linear regression method. The composition beads are assumed to be a combination of basic beads so that the DBRF's and bead-exit thinning are computed to the sum of those of basic beads.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.786-791
• /
• 2000

The purpose of this study is to investigate quantitatively the effects of drawbead dimensions to the weld line movements for the deep drawing of the tailor welded blanks. Square blanks have been used and five different circular drawbeads were installed in experimental apparatus. The differences in the weld-line movements and the tendencies of the strain distributions in thickness were investigated by experimental and analytical methods. The results of the weldline movement show that the smaller the radius of drawbead installed, the larger the values of movements. Also it is shown for thickness strain in central and diagonal direction that the larger the dimension of drawbead, the larger the values of maximum thickness strain. The drawbead adds the additional restraining forces to the blank, hence the movement of weld line could be controlled by the adequate drawbead installation

• 소성∙가공
• /
• 제12권4호
• /
• pp.320-327
• /
• 2003

This paper is concerned with forming analysis of Front Side Members and effects of the forming analysis on crash analysis of an auto-body. For efficient forming analysis, equivalent draw-bead restraining forces are calculated with ABAQUS/Standard and then used as the boundary condition in forming simulation. In order to demonstrate the validity of the forming analysis, the thickness variation in the numerical simulation result is compared quantitatively with the one in the real product. Forming histories obtained kom the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness. Crashworthiness such as the load-carrying capacity, crash mode and the energy absorption is evaluated and investigated for the identification of forming effects.