• Journal of Dental Rehabilitation and Applied Science
• /
• 제23권3호
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제31권3호
• /
• pp.527-533
• /
• 2004

One clinical technique recommended for improving marginal integrity is "rebonding" or application of unfilled resins to the surface of composite restoration. But continuously the restorations are affected with occlusal load. There is room for doubt that the rebonding agent has the positive effect on microleakage in spite of the stress generated by the occlusal load. This study determined the effect of rebonding on microleakage of Class V resin composite restorations under load cycling. Class V cavities were prepared on the buccal surface of 40 sound extracted premolars and restored with a hybrid light-cured resin composite according to manufacturers' directions. They were randomly divided into two groups consisting of 20 samples: a control(group I), without surface sealing, and the other group(group II) in which margins were etched and rebonded. After thermocycling, each of groups was divided into subgroups(group A, B), and load cycling(total 100,000 cycles with 4-100N load at a rate of 1 Hz) were applied on the group B. Assessment of microleakage utilized methylene blue dye penetration. The following results were obtained: 1. In the occlusal region, no significant difference was noted in the scores regardless of whether or not the rebonding agent was used(group TA-IIA, IB-IIB)(p>0.05). 2. In the cervical region, the control group with rebonding(group IIA) showed the better result than the group without rebonding(group IA)(p<0.05). 3. In the cervical region, the rebonded group with load cycling(group IIB) showed similar results to the group without rebonding(group IB) and no significant difference was noted(p>0.05).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제32권3호
• /
• pp.154-167
• /
• 2014

The results of this study conducted to identify the substance, regional characteristics or landscaping of Namwon Yonghogugok, which is the only valley of Jiri Mountain, based on Kim Samun's 'Yonghokugok-Gyeongseungannae(龍湖九曲景勝案內)', 'Yongseongji(龍城誌)' and position, meaning of letters carved and projection technique by ArcGIS10.0 on the rocks are as below. The feature landscapes of the canyon of Yonghogugok, which is an incised meander and one of the Eight beautiful scenery of Namwon, ponds, cliffs and rocks generated with metamorphic rocks and granites weathered by rapids torrents. As a result of measuring the GPS coordinates of the letters carved on the rocks, excluding the 3 Gok Hakseoam and the distances based on the origin and destination of the letters carved on the rocks using the API(Application Programming Interface) function of Daum map, the total distance of Yonghogugok was 3.5km and the average distance between the each Gok was 436.5m. It is assumed that Yonghogugok was designated by Sarim(士林) of the Kiho School(畿湖學派) related to Wondong Hyangyak(元洞鄕約) which is the main agent of Yonghojeongsa(龍湖精舍), the forerunner of Yonghoseowon(龍湖書院), between the late Joseon Dynasty and the early Japanese colonial era, in 1927. Its grounds are the existence of Yonghoyeongdang mentioned on 'Yonghojeongsilgi'(龍湖亭實記), records of 'Haeunyugo(荷隱遺稿)', 'Yonghopumje(龍湖品題)' of Bulshindang(佛神堂), 'Yonghojeongsadonggu Gapjachun(龍湖精舍洞口 甲子春)' letters carved on the rocks and 'Yonghogugok-Shipyeong(龍湖九曲十詠)' posted on Mokgandang of Yonghoseowon. Comprehensively considering the numerous poetry society lists carved on the stone wall of Punghodae(風乎臺), the Sixth Gok Yuseondae, its stone mortar, 'Bangjangjeildongcheon(方丈第一洞天)' of Bulshindang and Gyoryongdam(交龍潭), the Yonghoseokmun(龍湖石門) letters carved on the rocks, Yeogungseok adjacent to the First Gok and Fengshui facilities, centered on Yonghoseowon and Yonghojeong, Yonghogugok can be understood as a unique valley culture formed with the thoughts of Confucianism, Buddhism, Taoism and Fengshui. 'Yonghogugok-Gyeongseungannae' provides very useful information to understand the place name, called by locals and landscaping aspects of Yonghogugok in the late Joseon Dynasty. In addition, the meaning of "Nine dragons" and even though 12 chu(湫: pond) of Yonghogugok Yongchudong including Bulyeongchu, Guryongchu, Isuchu, Goieumchu and Daeyachu are mentioned on Yongseongji, a part of them cannot be confirmed now. Various place names and facilities relevant to Guryong adjacent to Yonghogugok are the core of the place identity. In addition, the accurate location identification and the delivery of the landscaping significance of the 12 ponds is expected to provide landscaping attractiveness of Yonghogugok and become very useful contents for landscaping storytelling and a keyword of storyboard.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제30권2호
• /
• pp.72-89
• /
• 2012

This study aimed to reconsider the theory that the renowned Amisan(峨眉山) terraced garden at north of Gyotaejeon(交泰殿) was artificially made, by reviewing the historical records and drawings. It has been widely accepted that Amisan was made of the digged soil from Gyeonghoeji(慶會池). But several arguments about artificial mountain theory of Amisan that completely not be found in historical records have been raised in this study. The results were summarized as follows; the inherent contradiction in existing opinion, the discordance between the time of building Gyeonghoeji and Gyotaejeon, the existence of the mountain range which connect Baekaksan and Amisan appeared in Dohyeong(圖形), historical documents written in the years of kingdoms of Youngjo(英祖) and Gojong(高宗), a high position seen from Heungbogjeon(興復殿) in the north Amisan through the wall in the east but impassable, an opinion about realization Amisan as geomantic term of Amisa(蛾眉砂) at the time of Gyeongbok Palace reconstruction, and preservation of the mountain range in Gyeongbok Palace that comes from the result of the arguments in main mountain of Gyeongbok Palace in the year of Sejong(世宗). In addition, it was investigated why the slop in the north of Gyotaejeon was named as Aminsan and why the artificial mountain theory is appeared and made a conclusion that the Amisan comes from the change of the pronunciation of the geomantic term "Amisa", and modeling the yijing[意景] of Amisan which is a sacred place of Taoism and Buddhism in Sichuan[四川] of Chinaand the view of construction to mean defeating a spirit of smallpox which had to be cured. And it seems to be a result which retroactively applied the artificial mountain theory of Amisanis the technique of 'constructing mountain with digged pond dirt' to the relationship between Gyeonghoeji and Amisan. The greater part of mountain range which was connecting with Baekaksan and Amisan was seriously disconnected with large scale of exposition by the Japanese colonial period in 1915. But low slope is kept about 70 meters along the trail northeast of Gyotaejeon. Accordingly, it is judged that the range has not been entirely destroyed. And according to the result of elevation analysis, discontinuous slope form certain axis is found, so the mountain range of Amisan is approximately estimated. This basic research about the mountain range of Amisan might provide a critical clue about restoration of topography in Gyeongbok Palace.

• Geophysics and Geophysical Exploration
• /
• 제11권2호
• /
• pp.127-136
• /
• 2008

To identify the potential area of gas hydrate in the Ulleung Basin, 2-D and 3-D seismic surveys using R/V Tamhae II were conducted in 2005 and 2006. Seismic survey equipment consisted of navigation system, recording system, streamer cable and air-gun source. For reliable velocity analysis in a deep sea area where water depths are mostly greater than 1,000 m and the target depth is up to about 500 msec interval below the seafloor, 3-km-long streamer and 1,035 $in^3$ tuned air-gun array were used. During the survey, a suite of quality control operations including source signature analysis, 2-D brute stack, RMS noise analysis and FK analysis were performed. The source signature was calculated to verify its conformity to quality specification and the gun dropout test was carried out to examine signature changes due to a single air gun's failure. From the online quality analysis, we could conclude that the overall data quality was very good even though some seismic data were affected by swell noise, parity error, spike noise and current rip noise. Especially, by checking the result of data quality enhancement using FK filtering and missing trace restoration technique for the 3-D seismic data inevitably contaminated with current rip noises, the acquired data were accepted and the field survey could be conducted continuously. Even in survey areas where the acquired data would be unsuitable for quality specification, the marine seismic survey efficiency could be improved by showing the possibility of noise suppression through onboard data processing.

• Journal of the korean academy of Pediatric Dentistry
• /
• 제37권1호
• /
• pp.65-72
• /
• 2010

General anesthesia has been researched and developed in dentistry as on type of management technique to sedate patients who may be uncontrollable or require medical consideration. There has been continuous research into this area, but analysis of large set of patients over a sustained period of time is lacking. Thus, this study analyzes the records of patients who received general anesthesia at the Yonsei University Dental Hospital Department of Pediatric and Clinic for the Disabled. 1. Patient's age ranged from 1 to 66, with under 5 being the largest group with 410 members(38.5%). The study included more men than women, with 695 male members(65.3%). 2. Type of dental procedure performed were as follows(per person) : 5.6 Dental restoration; 2.3 Endodontic treatment of deciduous and primary teeth; 2.5 preformed crowning; and 1.6 extractions. Procedures took an average of 100 minutes. 3. 1022 patients(95.9%) received dental care under general anesthesia once and 43 patients(4.1%) received dental care under general anesthesia two or more times. Dentistry under general anesthesia has the many benefit. However, without appropriate post-treatment care, it is difficult to maintain good oral health. Therefore, it is important to improve the efficiency and safety of general anesthesia through future research.

• Korean Journal of Environment and Ecology
• /
• 제33권4호
• /
• pp.378-401
• /
• 2019

This study generated a list of plants in eight sections from the Baekdansa ticket office (874m) to Cheonjedan (1,560m) divided in the interval of 100m above sea level to examine the species diversity patterns and distribution changes of the vascular plants at different altitudes in Taebaeksan National Park. Four site surveys found a total of 385 taxa: 89 families, 240 genera, 345 species, 5 subspecies, 34 varieties, and 1 form. A result of analyzing the change of species diversity along elevational gradients showed that it decreased with increasing elevation and then increased from a certain section. A result of analyzing habitat affinity types showed that the proportion of forest species increased with increasing elevation. On the other hand, the ruderal species appeared at a high rate in the artificial interference section. A result of comparing the proportion of woody and herb plants showed that the woody plants gradually increased with elevation and rapidly decreased in the artificial interference section. On the other hand, the herb plants showed the opposite trend. A result of analyzing the change of distribution of species according to altitude with the DCA technique showed that the vascular plants were divided into three groups according to the elevation in order on the I axis with the boundaries at 900m and 1,300m above sea level. The arrangement of each stand from right to left along the altitude on the I axis with a significant correlation with warmth index (WI) confirmed that the temperature change along the altitude could affect the distribution of vascular plants, composition, and diversity. Therefore, the continuous monitoring is necessary to confirm ecological and environmental characteristics of vegetation, distribution ranges, changes of habitat. We expect that the results of this study will be used as the basic data for establishing the measurement measures related to the preservation of biodiversity and climate change.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제39권3호
• /
• pp.33-41
• /
• 2021

This study identified the scale that traditional landscape design has taken up by analyzing a total of 1037 services for design of cultural heritage that had been ordered by the government agencies from 2018 to 2020, and has drawn characteristics of traditional landscape design focusing on major cases. The results are as follows. First, the number of order cases for traditional landscape design has shown differences annually in the services of design of cultural heritage, but the design amount has been found to have the similar average annually, which confirmed that the same level has been maintained each year. It was found that the number of cases of traditional landscape design requiring responsibilities or participations of landscape engineers for 3 years in the entire design had a high proportion of approximately 26%. Second, the traditional landscape design has required professional knowledge and experiences of landscape engineers that could not be replaced by the business operator for design of cultural heritage consisting of architects. The expertise has been shown differently depending on types of construction. First, the topographical design for the work to build a foundation has required understanding of ground shapes and its elevations and professional knowledge on calculation of the amount of the earth work and the remains maintenance technique etc. The plantation design has required basic knowledge on growth characteristics of trees and the environment for growth and understanding of the vegetation landscape of the past. Meanwhile, the design for traditional pavement and traditional landscape structures and facilities has required the expertise on traditional materials that are different from the modern ones and their processing and construction methods. The understanding of changes to water paths and ecosystem, the principles of fluids, and characteristics of each type of fluid was essential for the design for the ecological landscape work including the maintenance of a water system such as rivers etc. As such, the traditional landscape design has a scale accounting for approximately one fourth of the entire cultural heritage design and requires the expertise differentiated from other fields. This improves the provisions of the current law on limiting the actual design, suggesting the need for the establishment of a traditional landscape design company so that all traditional landscape designs can be carried out by landscape engineers.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제29권3호
• /
• pp.116-123
• /
• 2011

This study investigates the characteristics(form, material, structure, method of construction, vegetation) and model of lotus pond in Joseon Royal Tombs for conservation and restoration. The objects of study are the lotus pond of Namyangju Gwangreung, Hyoreung, Gimpo Jangreung and Sungreung that are well-preserved and the record is remaining. The form is two plane types, square shaped include an island and square shaped. The pond is 7.5~81m in width and 6.5~45m in length and the island is 8~16m in diameter. The depth of water is 0.5~1.2m and the cross section form is narrow bottom and wide top. The material of shore protection is soil in Hyoreung, Gimpo Jangreung and Sungreung. The bottom is mud in all sites. I think that the main material of the lotus pond in Joseon Royal Tombs is soil. The lotus pond is built by soil bank in the structure and method of construction. The water supply and drainage are worked through the culvert. There are many kinds of plants in the lotus pond today, however I think that the model of vegetation of lotus pond in Joseon Royal Tombs is lotus the inside, pine tree, fir tree and flowers the around and pine tree the inside of island in compared the present and the old literature. In comparison with the lotus pond in Joseon Royal Tombs and the lotus pond in the Joseon palace, the material is the biggest difference. The main material is soil in Royal Tombs but isodomic in Royal Palace. I think that the difference of material in between two causes the difference of structure and method of construction. The Royal Tombs is valuable in architecture, landscape and esthetics, this study investigated the characteristics and model of lotus pond in Joseon Royal Tombs. I think that this study serves as a momentum to find a traditional technique in Royal water space and offer the foundation to plan in the contemporary water space.

• Korean Journal of Heritage: History & Science
• /
• 제54권2호
• /
• pp.22-37
• /
• 2021

The wind chime is a longstanding Jangeomgu (majestic article) found in Korea, China, and Japan. However, basic research on wind chimes is currently inadequate as it is difficult to estimate the time of production, and there are few relics. Therefore, this research morphologically classifies the eight bronze wind chimes decorating the baldachin of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan. Based on this, the manufacturing techniques and production period are scientifically demonstrated. The synthesis of the research results reveals that the structure and characteristics of the wind chimes of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan differ depending on their location on the baldachin. The four large-sized wind chimes on the lower-baldachin were manufactured by casting a Cu-Sn-Pb alloy, and they are estimated to have been made during the early period of Goryeo. The two medium-sized wind chimes of the upper-baldachin's northern direction were manufactured through forging a Cu-Sn or Cu-Sn-Pb alloy, and they appear to have a similar structure to the cylindrical wind chimes appearing during the latter period of Goryeo and the Joseon period. The two small-sized wind chimes of the upper-baldachin's southern direction were manufactured by casting a Cu-Sn-Pb alloy containing Zn, and based on the chemical composition of the alloy and the shape of the clapper, they are estimated to have been manufactured during the latter period of Joseon. Through the observation of microstructures and a chemical composition analysis, it is demonstrated that two wind chimes of the lowerbaldachin were manufactured by casting and slow cooling the alloy with an alloy ratio of Cu:Sn:Pb≒80:15:5. In addition, it is estimated that the wind chimes of the upper-baldachin's northeast direction were manufactured by forging an alloy of Cu-Sn with a similar alloy ratio to that of forged high tin bronze. The results of a comparative analysis of prior research on domestic wind chimes confirm that two wind chimes of the lower-baldachin have a similar composition ratio to the wind chime excavated from Wolnamsaji in Gangjin, containing an amount of tin that corresponds with ancient records. Having a similar alloy ratio to forged high tin bronze, the wind chimes of the upper-baldachin's northeast direction are the only instances among all of the wind chimes that have been examined to date that were manufactured using this forging method. The purpose of this research is to collect baseline data to verify and classify the manufacturing period of wind chimes according to their morphological characteristics based on scientific evidence. It is hoped that this data can be utilized for the restoration and conservation processes of the wind chimes of the Stone Standing Maitreya Bodhisattva of Gwanchoksa Temple, Nonsan.