• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.89-97
• /
• 2004

빛을 반사하거나 방출하는 물체의 형상은 여러 원인에 의해 왜곡된 영상으로 센서에 포착된다. 이러한 왜곡을 제거해 원래 물체의 형상을 추정하는 것을 영상 복원이라고 한다. 영상 복원은 결정론적 방법과 확률론적 방법이 있다. 본 논문에서는 확률론적 방법의 한 종류로서 피셔 인포메이션(Fisher Information)으로부터 유도된 MFI(Minimum Fisher Information)을 이용한 영상 복원을 제안한다. 이는 B. Roy Frieden에 의해 최근에 제안된 신호 추정 방법의 하나이다. MFI을 이용한 복원에서 노이즈 제어 파라미터에 따라 영상 복원의 결과가 어떻게 변화하는지를 조사하였으며, 복원의 정확도에 대한 기준으로 크로스 엔트로피(Kullback-Leibler entropy)를 사용하였다.

• 한국환경과학회지
• /
• 제31권5호
• /
• pp.389-404
• /
• 2022

The purpose of this study is to evaluate the vegetation recovery status of Mudeungsan National Park Jungmeorijae, Jeungsimsa district restoration site, and the Shimwon Valley ecological landscape restoration site in Jirisan National Park. Compared to the control plots, the Jungmeorijae restoration site was analyzed to have height growth of about 73.5%, the average species diversity index of about 75.2%. and the average similarity index was recovered to 7.75%. In the case of the restoration site in Jeungsimsa district, the height growth compared to the control plots was about 69.2%, the average species diversity index was about 55.0%. and the average similarity index was recovered to 25.65%. In the case of the Shimwon Valley ecological landscape restoration area, the height growth compared to the control plots was about 32.6%, the average species diversity index about 176.7%. and the average similarity index was recovered to 0.85%. The restoration site of the Jeungsimsa district was planted with relatively large trees during restoration work, and it took a relatively long time(20 years). Also, the site had less limiting factors due to the low elevation, allowing the degree of vegetation recovery to be higher than that of other sites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.381-383
• /
• 2004

This paper presents for service restoration Abstract -in electric power distribution systems. The aim of the service restoration is an emergency control in distribution system to restore out-of service areas as soon as possible when a fault occurs in distribution system. For this reason, this paper presents a new service restoration strategy for multi-outage areas. Proposed algorithm consists of two methods. One is individual restoration scheme, the other one is integrated restoration scheme. The former determines restoration order of outage areas based on restoration index. If the former method can not generate a feasible restoration plan, the latter would try to find new configuration without overloaded section through tie exchange method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.416-417
• /
• 2019

In this paper, an effective power flow control strategy (PFCS) based on the centralized control approach and a DC-link (DCV) restoration algorithm for DC microgrid (DCMG) are presented. By investigating the statuses of system power units, eleven operating modes are given to ensure the system power balance under various conditions. To avoid the system power imbalance caused by the delay of grid fault detection, a reliable DCV restoration algorithm is proposed. In the proposed scheme, when an abnormal variation of the DCV is detected, the battery instantly starts a local emergency control mode to restore the DCV to the nominal value regardless of the control mode from the central controller. The simulations and experiments are carried out to prove the effectiveness of the PFCS and the proposed DCV restoration algorithm.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1584-1589
• /
• 2012

The grid-interconnected microgrid can be able to operate with and without the utility microgrid to supply electricity. when the microgrid operates in grid-connected mode, the frequency of the microgrid synchronizes with the system frequency. In this case, the frequency of the microgrid has small variation which is able to change the output of distributed generation with a droop controller. Thus, the small variation of frequency can make the distributed generation generate unnecessary electricity consistently. In this paper, we propose a frequency droop control with a dead band so as to prevent the distributed generations from generating unnecessary output while in grid-interconnected mode. In addition, a distributed generation can have a restoration control to restore the frequency changed by a droop control as a rated frequency. Also, we state the problem of restoration control with a dead band, and propose its solution when the microgrid operates in stand alone mode. We simulate the proposed droop control using PSCAD/EMTDC to verify the validity of the control.

• 한국환경복원기술학회지
• /
• 제13권6호
• /
• pp.87-96
• /
• 2010

This study was conducted to select environmentally-friendly and low-cost mulching material that could replace soil molding which can be used to restore vegetation in an abandoned coal mine area. To this end, we established 20 experimental plots (4m ${\times}$ 10m in size) on the steep, south west-facing slope of the abandoned coal mine area in Hwangji-Dong, Taebaek City, Gangwon Province in April 2006. We planted two-year-old 1,600 seedlings (at intervals of 0.6m ${\times}$ 0.8m) of drought-resistant tree species including Betula schmidtii, Betula platyphylla var. japonica, Amorpha fruticosa, and Quercus mongolica in the plots. After planting seedlings, mulching was applied by using five different kinds of material such as HWAP (Teracotem), peat moss, straw mats, wood chips, and control (no-mulching) and the effects of different mulching material on the survival rate and growth performance were compared. Three years after planting, the survival rate was the highest in wood chip mulching, followed by straw-mat, peat moss, HWAP, and control. The survival rate was the highest in Quercus mongolica, followed by Betula schmidtii, Betula platyphylla var. japonica, and Amorpha fruticosa. Meanwhile the height growth was the best in Betula platyphylla var. japonica, followed by Betula schmidtii, Quercus mongolica, and Amorpha fruticosa. The height growth of seedlings was the best in HWAP mulching, followed by peat moss, woody chips, straw mat, and control. From an economic point of view, wood chips are considered to be the best mulching material. The results showed that mulching without soil molding and/or mixing applications would be effective for restoring vegetation in an abandoned coal mine areas.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.1158-1168
• /
• 1994

본 논문은 선로 장애에 대한 분산 제어 자체 치유 알고리즘을 제안한 것으로 복구시간을 향상시키는데 중점을 두었다. 복구를 위해 망에서 교환되는 제어 메시지의 개수를 작게 하고, 이웃 노드들에게 더 이상 복구에 사용된 예비채널이 없음을 이리 알리는 ASC_NULL(Available Spare Channel_NULL) 신호를 만들어 복구 경로 설정 과정에서 낭비되는 시간 지연을 줄임으로써 빠른 복구 시간을 얻을 수 있었다. 다른 여러 자체 치유 알고리즘들과의 객관적인 비교는 여러 조건들의 차이로 어려우므로 NETRATS(NETwork Restoration Algorithm for Telecommunication Systems)와의 비교만을 시뮬레이션 하였다. 시뮬레이션의 결과에서 제안된 알고리즘이 NETRATS보다 향상된 복구 시간을 가진다는 것을 알 수 있었다.

• 환경생물
• /
• 제32권2호
• /
• pp.102-111
• /
• 2014

Ecological restoration is regarded as a major strategy for preventing biodiversity loss and thereby enhancing ecosystem service. This study was performed to evaluate ecosystem service value that the restored ecosystem provides. Ecosystem service was evaluated for provisioning and regulating services. The former service was evaluated by comparing similarities in a viewpoint of floristic composition to the reference site between the restored and the unrestored sites. Species composition of the restored site was found to be more similar to the reference site than that of the unrestored site and thereby restoration practice contributed for enhancing the provisioning service. Regulating service was evaluated based on microclimate control, soil amelioration, and improvement of water holding capacity. The value of ecosystem services in terms of microclimate control, soil amelioration, and improvement of water holding capacity was higher in the restored site than in the unrestored site. In consequence, ecological restoration of coal mine spoils contributed for enhancing the ecosystem service value of the corresponding site and thereby is rewarding the cost invested for restoration.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.524-528
• /
• 2006

A controller built with the gyro effect for a balance-beam can freely control the attitude of an unstructured object by changing the position of an inner gimbal. In this paper, we propose a new balance-beam controller that can detect the inertia of the load to limit the velocity of the load commanded by a user. We found that when there was smaller load inertia, a larger restoration displacement occurred. Therefore, the load can be identified by issuing a predefined command to measure the restoration displacement, which enables us to construct a controller that can limit the angular velocity of the load by planning the motion. Experimental results show the performance of the controller with different loads.

• 조명전기설비학회논문지
• /
• 제20권3호
• /
• pp.69-77
• /
• 2006

이 논문에서는 배전계통의 정전복구 알고리즘에 대해 연구하였다. 배전계통에서 정전이 발생하였을 경우, 그 피해를 최소화하기 위해 가능한 빠른 시간 내에 정전복구가 완료되어야 한다. 따라서, 본 논문에서는 광범위한 영역에 걸친 정전구간을 신속하게 복구하기 위한 2가지 방법을 연구하였다. 하나의 방안은 개별정전복구방안이며, 다른 하나는 종합정전복구방안이다. 이 방안은 복구지수를 이용하여 정전구간을 복구하는 것을 도와준다. 또한 연계점 교환법을 이용하여 과부하구간을 해소함으로써 정전복구에 일조하게 된다.